Dear All, Kindly check out the below link for Structural Analysis and Design of RCC building using Staad.Pro software. In this course, all the basic concepts, and Lateral load Analysis(Response spectrum and wind load analysis) of a building as per IS-456, IS-875, IS-1893-2016, and detailing as per IS-13920 have been explained. www.udemy.com/course/staadpro-v8i-structural-analysis-design-of-a-rcc-building/?referralCode=C1CBC2B104EF72579338
@jeeva52114 жыл бұрын
the way of teaching is so good, easy to understand .MAAM its worked 100% thanks
@CivilEngineeringMastery4 жыл бұрын
Glad to hear that!!
@CivilEngineeringMastery4 жыл бұрын
kzbin.info/www/bejne/j5Cug4qtoduUpqM
@vishweshambewadkar45983 жыл бұрын
How you have moved the line daigram to O origin using move command can you explain
@mohammedzaidalam1450 Жыл бұрын
awesome really concept clear design analysis but how did you design footing and find out SBC?
@beingamazeenterprises91892 жыл бұрын
Thanks for helping me. Wanderfull vedio
@CivilEngineeringMastery2 жыл бұрын
Thanks and welcome
@kuldeepverma26123 жыл бұрын
Thank you maam thank you so much for sharing this video with us ..
@saurabhhadke90093 жыл бұрын
MAM, U R DOING AN AWESOME WORK, KEEP IT UP.....ALL THINGS R NICELY EXPLAINED....
@CivilEngineeringMastery3 жыл бұрын
It's my pleasure
@sabarishbabu39024 жыл бұрын
Thankyou for all civil engineering related videos. Thankyou so much.
@NlovesB27062 жыл бұрын
Good explanation
@ugwuezeruth8537 Жыл бұрын
It was helpful thanks
@varunchhabria14742 жыл бұрын
Thanks a lot mam
@lalithapvs57992 жыл бұрын
Good Video. Really struggling to convert the units and import to staad. You video helped a lot. Thank you
@CivilEngineeringMastery2 жыл бұрын
You are welcome!
@a.aroicikiaamalrajamalraj93 жыл бұрын
Very useful. Thank you madam. Keep post more and more.
@CivilEngineeringMastery3 жыл бұрын
Sure 👍
@rushankjani44112 жыл бұрын
IT WAS VERY HELPFUL, Thank You.
@CivilEngineeringMastery2 жыл бұрын
You're welcome!
@Jrn1796 ай бұрын
Nice
@Badal_Bhabhar3 жыл бұрын
Really helpful video😊 Thank You Ma'am 🎊
@shilpisuseel26162 жыл бұрын
Thankyou it was so useful. Moveing to origin was tough suggest UCSICON command to origin.
@CivilEngineeringMastery2 жыл бұрын
Glad to hear that
@mr.a.arulgnanapragasam25103 жыл бұрын
Nice explanation madam. Thank you
@SunilPatel-nk3pg4 жыл бұрын
Explained well
@UnikHomeDesign3 жыл бұрын
Excellent explanation keep it up #unikhomedesign
@ce12kathirjailakshmankk178 ай бұрын
Mam I am designing a building my column size is 300 x 450 mm for G+5 and basement parking ,It is for commercial and residential purpose.and the beam size is 300 x 450 mm . Is the beam and column size is okey mam . I am a final year student, is it ok.
@a.aroicikiaamalrajamalraj93 жыл бұрын
Your presentation skill is very good. Keep it up.
@CivilEngineeringMastery3 жыл бұрын
Thank you, I will
@CivilEngineeringMastery2 жыл бұрын
I have created a course, structural design of buildings using Etabs software which includes structural analysis and design of a five-sorey RCC building(Real project) and is now available on udemy. Kindly use the below link to avail the full course. www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?referralCode=14883FDBBD95A1ADAC02
@christianjoefelbessat93892 жыл бұрын
I successfully imported it to the staad but the nodes didn't indicate to be x0 y0 z0 only the y0, is it still usable?
@durgaprasadncclimited70623 жыл бұрын
Madam, I import the file in staad pro the centre line drwng is very small and not visible on screen any shrot cut key to zoom in on screen,,
@silarshamohammad20594 жыл бұрын
Good topic good video thank you mam..good luck
@CivilEngineeringMastery4 жыл бұрын
Thanks and welcome
@Pgan8035 ай бұрын
How you add 2nd or 3 storeys in AutoCAD or in Staadpro
@faisalbarguzar14012 жыл бұрын
It was helpful thank you but i thought you’ll design whole structure like column beam and foundation
@VINAYKUMAR-rr5hw3 жыл бұрын
Please give a complete staad pro session
@GaganKumar-go1ig3 жыл бұрын
Yes, it would be helpful!
@CivilEngineeringMastery3 жыл бұрын
Please refer the blow link kzbin.info/www/bejne/ml6ldpWsqqeHpa8
@vishweshambewadkar45983 жыл бұрын
To move the line daigram to the 0 origin , what command you have used after using Move command?
@CivilEngineeringMastery3 жыл бұрын
move command only. In that you have to give x,y & z values as 0,0,0.
@pareshbaviskar67354 жыл бұрын
Good Explanation....but I have one question madam....we draw center line plan and column have some offset from beam mid point and column will move from its original place as per drawing ...in that case what should we do??
@CivilEngineeringMastery4 жыл бұрын
Thank you.Yes it happens,but that is very minor.
@pareshbaviskar67354 жыл бұрын
@@CivilEngineeringMastery thank you
@zohebimran3 жыл бұрын
Is there any need to convert the unit from inches to meter ? we can just import the structure in with units in foot.
@CivilEngineeringMastery3 жыл бұрын
Since we are using Kn-m as unit in staad.pro, we have to maintain same unit in autocad as well while importing from auto cad to staad.
@GaganKumar-go1ig3 жыл бұрын
I don't know basic as well ppz try to tell basics of commands like copy and move.....how to do that??
@maheshtelange51324 жыл бұрын
Mam in this toturial center line not passing through center of column. So beams at coulmn edge. How we design or model that type of structure. ( Plz tell )
@CivilEngineeringMastery4 жыл бұрын
In framing plan,the center line is based on beams.We cannot place all beams on the center of column.
@maheshtelange51324 жыл бұрын
@@CivilEngineeringMastery thank u mam So we design that column with bixial bending ? . .
@CivilEngineeringMastery4 жыл бұрын
Please refer the below link for column with different loadingkzbin.info/www/bejne/o5qzqKJjjpZ6fbM
@Josephaspdin53 жыл бұрын
🙏🙏
@reshmadrucker52743 жыл бұрын
what is the reason for sharing violation while import cad drawing
@GaganKumar-go1ig3 жыл бұрын
It'll be great if u could explain it more simpler and detailed!
@CivilEngineeringMastery3 жыл бұрын
Please refer the blow link kzbin.info/www/bejne/ml6ldpWsqqeHpa8 Will upload video for how to import autocad file to staad.pro software.
@ce12kathirjailakshmankk178 ай бұрын
Mam is the AutoCAD diagram is beam layout diagram
@CivilEngineeringMastery8 ай бұрын
yes
@vpsingh94792 жыл бұрын
how can i arrange command like you??
@Ex-Muslim_Arzan3 жыл бұрын
Thanks a lot..
@CivilEngineeringMastery3 жыл бұрын
Most welcome!
@arundosscapcivil4899 Жыл бұрын
Successfully imported But, Lines are Scattered. Why?
@CivilEngineeringMastery Жыл бұрын
Redo once and then check.
@dhineshro_4543 жыл бұрын
Sharing violation occurred while accessing nu varuthu
@a.k80583 жыл бұрын
Sir please make for how to calculate area of steel required for beam and column calculation how many bar are required for structure rcc
@CivilEngineeringMastery3 жыл бұрын
Noted. Please refer the below link for beam and column design kzbin.info/www/bejne/p4K3dK2Xgp6JfJo kzbin.info/www/bejne/oYfGeZyDbN2qh5I kzbin.info/www/bejne/mHTJh2ikoLVlmcU kzbin.info/www/bejne/n6G4hGaQrqx6gqc