how to install 2 gang 2 way touch switch

[@sebastianstefanowski4980]

Why bseed zigbee switches have no two-way port for connecting a cable. It would be so nice to build 2-way group using just wire and it would work even if Zigbee gateway is temporarilly off. Currently the only way to pair two zigbee is to use multi-control association function on the gateway and application and it will not work if gateway is off. It may also cause some lags. Having two-way over the wire is so very nice feature. Please add it also to zigbee switches to make 2-way groups more reliable and resistant to any wireless gateway problems.

[@bseed4652]

Hello, you can try to use Bluetooth or cell phone hotspot control switch Effective distance 5-10 meters

[@sebastianstefanowski4980]

​@@bseed4652 hmmm.... I don't fully get the answer. Please answer the following questions Yes or No? 1. Can BSEED Zigbee switches communicate directly switch-to-switch (over Bluetooth or RF) to synchronize the state and have 2-way connection working even if Zigbee gateway is temporarily off (not present in Zigbee network)? If the answer is Yes then how to setup this? 2. Can BSEED Zigbee switches work in 2-way connection when Zigbee gateway is present (in the Zigbee network), but internet connection to Tuya Cloud is NOT working? (can 2-Way work if connection Zigbee-Gateway-->Internet is temporarily out of service)? 3. Can BSEED Zigbee switches communicate in 2-way mode ONLY when: Zigbee gateway is present + must be connected to internet and Tuya Servers?

[@bseed4652]

@@sebastianstefanowski4980 Hello, about your question 1. The answer is yes, the setup is the same as WiFi or ZigBee link 2. The BSEED switch may still work when the Internet is temporarily not working. When the gateway loses contact, the 2-way switch does not work 3. ZigBee gateway + WiFi signal must exist when linking for the first time. After setting is finished 1) When WiFi loses signal, the gateway can work and the 2-way switch still can work 2) When WiFi loses signal and the gateway doesn't work, the 2-way switch can't work. 4. All products must be controlled with tuya or smart life app 5. When all signals are good, you can use touch, voice, APP control

[@alfworks]

I fully agree with this - I have these BSEED switches, but Tuya multicontrol association is crap. All you would need to do is to allow Zigbee to Zigbee direct communication between switches - the Zigbee protocol is BUILT for that.... all you would need to do is upgrade the firmware so that two switches can pair together. This can be done if current switches would use "OUT" cluster, which can be paired directly to second switch which has the light physically connected.

[@bseed4652]

@@alfworks Thank you very much for your feedback! We will try to contact tuya to improve their system I will also send this issue back to our technical department

[@istvanhegyi4677]

Hi! Can i reset pairing?

[@bseed4652]

yes dear, you can. same way with pair them

[@chtthierry2963]

Can this type of switch be connected with mechanical switch for 2 way?

[@bseed4652]

No, only switches of the same series can be connected together

[@joseignaciovivasdiaz6684]

Aqui hay magia, el el minuto 3:06 el cableado ha cambiado

[@bseed4652]

Hola, porque coincidimos con la otra banda de la misma manera, omitimos el proceso de disparar la conexión.

[@MiguelAngelReSo]

Hello, I have connected the two switches according to the video but when it comes to pair them it doesn't work, the first switch keeps flashing, what am I doing wrong?

[@bseed4652]

It is recommended that you connect the capacitor

[@jonesmadekeni6448]

I have the same problem with the capacitor installed ​ and the 2 gang two way connected between 2 seperate1 gang 2 ways is not pairing @@bseed4652