How to Install 2010-2013 Toyota 4Runner LED Puddle light

simply not so simple...
LED lightbulb size: 194

[@Farbar1955]

I've been looking for a video that concentrated on the 2010-13 4Runner's (I have a 2012) and finally this one showed up! Thanks! After watching this I went out and replace the puddle light lamps with LED's within ten minutes. Way easier than I thought it would be, especially after seeing the longer procedures for the later 4Runner models. Much appreciated.

[@caleblowe3092]

Glad to help 👍🏼

[@caleblowe3092]

Glad this helped y’all! I don’t own this 4Runner anymore as a Highlander was brought into the family. I am a certified ASE auto tech and I do like to help so if you are doing anything DIY, feel free to ask!

[@bibimbap7169]

Thanks for the video. I have a 2013 but could only find the 14-22 videos which is different. This is very helpful.

[@andystrubbergjr1235]

Yes thank you so much first and only video I've found that was just for our 10-13 4Runners very helpful was super hesitant on pulling the mirror off not any more thanks

[@centermass3454]

Based on your easy to follow video. I just converted my 2011 4R puddle lights to LED. I did all the interior bulbs and the license plate bulbs in 2015 but was hesitant to take apart the side view mirrors, not after seeing your video. Thumbs up for you.

[@twangoldenbass]

So pumped to see a video showcasing 2010-2013 4Runners!!! Spot on. Saved me and my neighbors a lot of cussing and throwing stuff!! Thank you so much man. Have been looking for some help on this for about a year !

[@mikekastner7036]

Thank you for posting this! Most of what I found elsewhere was for 2014 & newer which doesn't help me with my 2011.

[@centermass3454]

Now you should do a video on converting the Back Up bulbs to LED on the 4R (10-13)

[@twangoldenbass]

Super super easy- panels on left and right near the rear trays in the trunk area. There a notch on lower right side of panels you can stick a tool in and pop em out. Reverse will be middle bulb inside the panel. Counter clock wise turn and pull out. Take out halogen, insert LED. Takes a sec to try and line up the bulb housing, but once it’s flush, 1/2 turn clockwise until click will lock it back in. Also- reverse bulb doesn’t have a wire connected to it, which threw me off. Hope this helps.

[@1000gtxts]

Thank you …was looking for this video.

[@geocow5105]

What about changing the amber lights on mirror?

[@GG-nv8gt]

Good vid. I’ve been waiting for someone to do this video

[@DerekSanford]

Is that how to get to the turn signal light in the mirrors too?

[@bobsokoloski9559]

Need more light on the subject Caleb.

[@dockins]

Thanks!

[@db8633]

Dude i can't get my mirror to get clipped back on! What am I doing wrong??

[@conwaystank0192]

I have a 2013 4Runner, how do you go about changing the turn signals out on the mirrors?

[@mikekastner7036]

Did you find out how to change out the turn signal bulbs? I can't find much info on this for the 2010-2013 models...

[@jr1564211]

Not sure if I missed it in the video, but what bulb size did you order here?

[@totkanikup4901]

Jr15642 194 led

[@stereosoda1000]

Thank you for this

[@rubsadubs9260]

Thank you

[@Calvin7007]

Thank U 😎

[@MM-ul6bc]

I cant find that LED on amazon or ebay?

[@slprciv]

194 bulb

[@MM-ul6bc]

Mahalo