How to install 2015 and up Dodge Charger seats into your 2011 to 2013 Dodge Charger

[@Jdecker]

Thank you so much for this video! Only one like it on KZbin. Just finished doing this on my charger. Definitely works for both powered and non powered seats as well.

[@stroise256]

thank you for showing where the hell those 2 clips go. at 3 min 17second mark. your a god. Nice and slow video. Thank you

[@JONATHAN-u9e]

I just got done doing the Same thing on my 2011 charger pursuit. I got some beautiful leather seats out of a 2019 300.

[@fendyconille5061]

A1 video man. Very informative and detailed. Wish all the other videos were like This. Thank you 🙏🏾

[@JawadKhan-hz9sc]

As long as your car has basic power seats, you can install full power seats with power recline and power lumbar ... Remove the basic harness from old seat( seat switch, seatbelt, airbag) cut the main power wire usually red or orange and also the ground wire usually black. Splice it to the same color wires on your original harness. Just installed 2014 6 way fully power seats in 2019 charger pursuit

[@leonardomartinez8633]

3:51👌😂😂😂

[@geeball5975]

Thanks a lot very helpful I doing the same swap and encounter this problem 👍🏾

[@jonathanmiller4159]

i like how u snapped that bug off lol

[@chrisc8774]

Did your air bag light turn on

[@wolverinebear5357]

Thanks bro, how much $ did you get the 15' seats for?

[@ReptarART]

Everything works heated and power

[@not_barzo7163]

i know im a little late to this but my car i recently purchased has a scat pack suede seat swap, the original passenger seat was manual reclining, the new suede seats in it now are powered. every adjustment works on the seat besides the recliner, what can i do to fix this? someone please help this is super annoying!!!

[@pimpindnice910]

Great video man, super informative and with a step by step breakdown. What were the seats that you ending up installing in your charger?

[@lukesautoaccessories1550]

They were from a 2017 SXT plus i believe. It has been a while

[@pimpindnice910]

@@lukesautoaccessories1550 ok, thanks

[@jimraptis5382]

After doing this are there any seat belt or air bag lights on?...thanks very much for the video BTW

[@lukesautoaccessories1550]

I haven't had any SRS related errors or lights since. Since you're swapping most of the old seat harness, and the new bags are exactly identical, the car doesn't seem to have an issue with it

[@mkyles29]

Hey I’m doing the same swap 2019 set seats into a 2013 pursuit charger… I noticed that the harness that plug in on the side of the seat to control the power has only 4 pins and the old harness has about 9 Pins is it still plug in play or did u have a problem with this?

[@jerrygarrett5726]

Trying to put hellcat seats in my 2014 rt all the lumbar and side buttons work but the heated and cooled options aren’t working and my airbag lights on I’m not sure what to do could u help me I’d appreciate it my old seats were heated and cooled so it should work

[@donniesmith8493]

Good video on my 2013 charger the passenger seat doesn’t slide back far enough my knees hit the glove compartment and i dont know how to get it back further it stops sliding back when i get to a certain point??

[@lukesautoaccessories1550]

If you're trying to gain access to those frot screws to remove the seat you may have to pull the lower cushion and foam off to get a wrench in there. But that would be my last resort option. If you can raise the seat straight up maybe you can gain access to them with a long handled ratchet

[@fanboyreview]

i have a new 2017 seat but when i took the harness out of my old 2012 police seat it did not have power recline. everything eles got hooked up and works great ... but i need the harness that has the grey clip that plugs into the motors for the back recline motors to work. i have the new seat in my car with all function except the recline power. also i need the recline because its all the way forward and its uncomfortable.

[@3silver4beast59]

Same issue here I installed daytona seats on my base 15 charger RT but the passenger seat came manual on my stock seats so the new seat cannot recline or move. So i used the harness the daytona seats came with and work now but the airbag light stays on.

[@ryanreddix2460]

How you install the speed cluster

[@jakevolcano]

Is that a custom piece where the floor shifter would have been? I also have a former police charger with a civilian console and looking to replace the hole where the shifter was

[@lukesautoaccessories1550]

It came with the car. Unfortunately i do not know how to get one. Ive seen a lot of people fabricate their own using wood or plastic sheets and trace the hole on to it.

[@unreal3010]

Did the airbag light come on when you swapped the seats?

[@lukesautoaccessories1550]

Airbag light stayed off. Something i should have added in the video is i highly recommend disconnecting the battery because technically the seats are apart of the SRS system. But yes, the car has had no light issues with the new seats 👍

[@fanboyreview]

whats the 2011-2013 harness part number ?????

[@AngelGarcia-xw1il]

How did u get the newer cluster to work?

[@lukesautoaccessories1550]

Hey, im surprised someone noticed! I kinda forgot this account existed but I'm trying to respond to everyone now. The 15+ cluster is completely interchangeable with the old one. But you will have to use a 15+ dash bezel for it to physically line up correctly. You will also need to buy a Z automotive Tazer to fully unlock and use it with your steering wheel controls. However, if all you care about is the speedometer, then you dont need to program anything. If you want to fix your Odometer, you will need a device called Alpha OBD. A quick google search should help you resolve that plus theres a great Facebook group on retired police chargers with many people who have done the swap

[@AngelGarcia-xw1il]

@@lukesautoaccessories1550 thx will look into it

[@TheGambinoo]

@@lukesautoaccessories1550 how do i get the 2015 and up charger dash to work on my 2008 dodge magnum 2.7L? and one more thing my magnum dont have power seats how do i wire up the 2013 dodge charger seat to my magnum?