For this BMS: s.click.aliexp... Want to know where we buy our battery supplies? thebatterydocto...
Пікірлер: 28
@annpower20134 күн бұрын
Wow, thank you so much for your recommend for our battery assemble parts. You are the best.
@RobertAdams-ly5ku Жыл бұрын
Love this channel, one of the best for ebikes on you tube
@massterrbarber2 сағат бұрын
I have bought a 48 V 20 amp hour battery from Audi express my bike runs on a 36 V system. It shows it on KZbin that it could be that it accepts a 48 V battery mines works for good for an hour the new battery and then it just shuts off when I would put a charger in unplug the charger for five seconds And power will be fully back on again so I don’t know what the situation is. I don’t know how to test this new battery so all I got is my old battery the new battery I don’t know what’s wrong with it. I don’t know if there’s something wrong with it. I don’t know how I can fix it. I don’t know nothing I just got this new battery that I need help with Anna. Yeah if there’s any advice, I don’t know if you can thank you.
@ITubeTooInc3 жыл бұрын
Just put the normally open thermal switch in parallel with the on/off switch instead of cutting it off, this way it will still switch off if the battery gets too hot and you can still use the on/off switch.
@NathenHolzl-pu6uw6 ай бұрын
Thanks I have some wisdom with this. Thanks for your efforts and experience. I'm great full for your skills and your communication abilities. This is so important for safety your clearly explained each step. I am truly grateful for your effort and time in making this video and I been asked by several people to help them learn about battery and have been looking for a good reference to help them. I will gladly give them your KZbin channel and ask that they check there work with your videos always the student I will check my battery build's with your videos. Experience 5 years, currently finishing 3 bms 200 + cell 72v scooter battery . I'll see what I can do about bringing some new subscribers to channel truly a great job
@krisferr214 ай бұрын
Where too buy This small black box he using for check the voltage and charging 😊😊
@sveip2 жыл бұрын
Isn't it better to run the ground somewhere else than over the cell monitoring cables to avoid shorts if the fragile silicone shielding fatigues? E.g. have it run around the other side of the battery?
@tofanalexander Жыл бұрын
Is it ok to put the BMS sense leads in the middle of each group instead of in-between?
@ShenZhenDigiCasting3 жыл бұрын
up to 96S LFP and NMC BMS
@whitefeatherslinger8194 Жыл бұрын
Also what is the black probes for ? Are they temperature aswell
@hnzlefty34736 ай бұрын
why 36v uses 10S bms instead of 9S? this seams to be the common practice but no explanation!
@echo90826 ай бұрын
It's based on discharged voltage. 3.6 * 10 = 36v, 3.6 * 9 =/= 36
@QUAD82 жыл бұрын
good day! i have broken 10s 36v 50a bms... can i use 10s 36v 15a bms for replacemnt?
@whitefeatherslinger8194 Жыл бұрын
Hey my man ive some 36volt 500watt 60cell batterys i want to join some together ,do i need one big bms or can i put 1 bms on each pack then join them all together. Im looking for big oower my man 🎉🎉😂
@jrftrading70383 жыл бұрын
Hi, I have a ebike with a 500 watt motor. The BMS went bad. Cells look good individually and producing 54v altogether. Bought replacement 13s BMS but the old one has no C- but new one does. Seems all new ones include C- so what to do in this situation? Is negative charge/discharge through P- ok? Or do you have BMS you recommend? Thanks
@Batteridoktorn3 жыл бұрын
C- most be connected to charging minus only. discharge to P-.
@guttss23532 жыл бұрын
I was about to take apart someone electric scooter for a 36vbattery, now Ill just make one.
@don4techy2 жыл бұрын
He really didn't explain much on what he was doing eg where the wires go etc
@tpaprika7353 жыл бұрын
which bms can I use with an on-off switch (ebike 250/350w 36v)?
@mariusc21373 жыл бұрын
Ann power on Aliexpress has exact same bms as he was using, but it has built in switch. I.ve been using theirs for over 2 years, built a lot of batteries with them and im very pleased with the quality.
@tpaprika7353 жыл бұрын
@@mariusc2137 do you have a link?
@mariusc21373 жыл бұрын
@@tpaprika735 Im not sure im allowed to link it here but in the video description The doctor linked his bms. Go on that link, then go on the store page and you.ll find it there. They have plenty of flavors:))
@sriucu16993 жыл бұрын
WHere is negativ and where
@markvaldez18433 жыл бұрын
Horrible. Why would you have the battery facing away from us on 8:00mins. Can't even see what ur doing or what wires ur testing. Lol's ur video lol
@hullebikerfishing3 жыл бұрын
If you take the time to LISTEN to what he says, he tells you what wires he is testing at 8.00mins.
@sriucu16993 жыл бұрын
Postive
@mireladimitrova28192 жыл бұрын
Hi, I planed to use only one pin for charge and discharge. The BMS I Bought came with C-. Can we join C- and P- in the same pin?