How To Install A Boost Gauge- (PROSPORT Boost Gauge Unboxing And Install)

Today We are showing you guys how to install a boost gauge on your 3.7 cyclone V6 mustang. this can be applied to other cars as well. The customer got a PROSPORT boost gauge which is available on our website now just message us.
Buy Your Performance Parts From the Mafia: automafiaracing.com/
Facebook: automafiaracing/
Instagram: automafiaracing
We use KZbin Buddy to help our Channel: www.tubebuddy.com/AUTOMAFIARACING
#AutoMafiaRacing #PartsPassionPerformance #AMRorDIE #MafiaTuned #VeteranOwned #JoinTheFamily
Auto Mafia Racing LLC, and Auto Mafia LLC are in no way telling you to attempt these mods, or to drive, or do what we do. Please consult a professional mechanic prior to doing any work on your vehicle. We will not be held liable for any actions taken due to the viewing of these videos.
Tags: auto mafia racing,auto mafia,parts passion performance,dyno tuning,drag racing,mafia tuned,boost gauge,how to,how to install a boost gauge,boost gauge install,boost gauge explained,prosport boost gauge calibration,prosport boost gauge install,prosport boost gauge wiring,boost gauge wiring,how to install,cyclone mustang

[@automafiaracing]

Go get yourself a boost gauge to install! Click the link! automafiaracing.com/search?type=product&q=boost+gauge

[@s8terboy420]

Yeah no shit my dude the tubing in my car for the break booster is hard tubeing!!

[@CombatePractico]

Thanks for the vid

[@automafiaracing]

Yw

[@AtticAZ]

I know how to install one. But I am sooooooo glad you posted this. I get bugged ALL THE TIME to help peeps install theirs. Lol. So much easier on the S197

[@automafiaracing]

Yeah its not any harder on the S550 lol. Even easier. But send them the link when they ask!

[@AtticAZ]

Auto Mafia Racing who you foolin’? You have to go through the firewall, way down under the brake booster. So far down that you need to get under the car. Lol. Oh and believe me I will. Great job. 👌🏼

[@automafiaracing]

lol you can do it right where i did it too

[@brailsford6010]

i was hoping you'd show the part running wires, haven't found a video showing that

[@automafiaracing]

its only 2 wires really. 12v power when accessory or engine on. then a ground. every single car is different for 12v on just got to poke around to find one.

[@scottmijin9463]

I know this is last years video, but could the stock boost gauge on the SCT X4 be used? Reading seems pretty accurate to me. Thoughts?

[@automafiaracing]

It usually is not and this is on an 11-14 which will not read boost.

[@scottmijin9463]

@@automafiaracing gotcha thanks again

[@subieworld303]

Where does the third plug on the gauge come in? I saw the sensor and power plugged, but there's 3 ports. Considering buying one, so curious. Thanks!

[@automafiaracing]

For daisy chaining

[@vermontvermont9292]

I just use those add a fuse things. I never like cutting into factory wiring for things like gauges. I cant remember what you call them, but it replaces the factory fuse location, and has a wire coming off with a crimp connector. Ahhh driving me crazy i cant remember the name of them lol.

[@automafiaracing]

We hate add a fuses. I'd rather have the fuse box lid be able to close and not have some loose fuse holder there

[@vermontvermont9292]

​@@automafiaracing I'm talking about the fuse block inside the car under the dash. My car doesn't even have a cover for that. I used them and wrapped everything nicely , and ziptied the rest up under the dash. Cant even tell. I need to find a constant though because I'm tired of having to re-select the color I like. I'm thinking about actually buying the same kit you have in the video. I've always used mechanical boost gauges. Ever since 2001ish. I've always been told they're more accurate. However I think over the past 20+ years technology has caught up to wear they're both even. Plus I can keep the vacuum lines solely in the engine bay that way and only having wiring in the cabin.

[@foxgrove60]

That's the big thing is the wiring my little cheap boost gauge has a green wire that goes to guage a ground and one red wire and I'm talking about the boost sensor I've tried both with the red wire contant and switched still ain't right

[@automafiaracing]

read the directions ;)

[@dannyg.6431]

I asked them this question but they didnt answr it so maybe you know... My water temp sensor has a ground wire and my gauge connector has a ground wire... do they each get their own bolted down ground? Or do i connect the 2 together? Thank you for the vid!

[@automafiaracing]

It would depend on the gauge. Id follow the instructions.

[@dannyg.6431]

@@automafiaracing the instructions they (prosport gauges) provided were close to not having instructions at all lmfao literally terrible but i got it to work! Turns out they both each get a ground and just powered through an ACC wire. Thanks for the reply!

[@techwiz2410]

Can you tell me..... Lets say you have 15in of vaccum.. does the boost gauges automatically calculate the conversion from vaccum to boost so that it will show approx 7psi of boost on the gause with a 15in of vaccum to the guage? Thank you!!

[@automafiaracing]

Boost is not vacuum they are opposite.

[@negativesplits06]

I have this exact boost gauge. Is there a reason you didn’t use the included transparent air filter that connects before the Boost/Vacuum sensor?

[@automafiaracing]

I wasnt worried about anything getting in it.

[@negativesplits06]

Auto Mafia Racing Oh okay, so I shouldn’t have any issues if I don’t use it?

[@automafiaracing]

Yes

[@negativesplits06]

Auto Mafia Racing I will have issues?

[@automafiaracing]

No should be fine

[@pineappleboi27]

What if you don't have a blow-off valve?

[@automafiaracing]

? What do you mean?

[@pineappleboi27]

@@automafiaracing where do you tap into the line if you don't have a blow off valve

[@automafiaracing]

@@pineappleboi27 any vacuum line that sees boost.

[@pineappleboi27]

@@automafiaracing any tips on figuring out which lines that would be😂

[@sebastianblas3109]

@@pineappleboi27 I know this is old, but directly on a turbo line, I replaced my hoses with turbosmart hoses and used a Connector similar to what they did. I understand what you mean about not having a BOV. Some cars were not equipped from the factory with a bov and some without an intercooler. A perfect example is a Z31 turbo, no intercooler, so no BOV, any lines or guages must be run directly through the turbo line

[@hellfury4623]

hey mate how did you calibrate the gauge to 0

[@hellfury4623]

all cool I worked it out and works great

[@automafiaracing]

Great

[@Al-ch4vl]

Showing the wiring is a lot more interesting than blabing about it, lost me at the red wire. If your gonna show a install show it all not half. Now I have to go watch another video to see how it's done

[@automafiaracing]

Thanks for watching.