How to Install a Card Reader to a Vending Machine (Nayax Touch)

[@ricogarcia6717]

I think this is the cable in the video - AP Automatic Products LCM 1, 2, 3 & 4 coin mech to control board MDB cable, please let me know if it works

[@pristinevending]

Thank you 🙏🏽

[@joeplea]

This video proves how real you are. Which is why I been subscribed for a minute. To be transparent about mistakes and pitfalls sets you apart from most bro. I'm actually beginning my vending machine career and I'm being told that my machines are not compatible with card readers

[@pristinevending]

Thank you so much 🙏🏽😌 and some machines may be worth updating the motherboard to take card readers. But I think I’m going to sell all of my machines that don’t take it. I’d rather not bother with them anymore honestly 😅

[@rexmundi8154]

For sheet metal, you can get a step drill that looks like a cone or pyramid that starts drilling a small hole and gets bigger in stages. Super easy to use.

[@pristinevending]

I recently discovered those after making this video. 😄

[@skoobzsnacks]

I made the same mistake bought a card reader n realized none of my machines were compatible. I contacted nayax n told them I was going to return it and they sent me your video💯 now I can't wait to get this thang installed!

[@pristinevending]

Did they really do that?? Nobody tells me nothing 🤣 Bless their hearts 😌

[@skoobzsnacks]

@@pristinevending yes they did. You're doing something right brotha!

[@USMC09]

What's What's actual name of the adaptor?

[@rexhenkle3377]

It's great that you're out there handling what you can and learning to overcome issues on machines. That experience will be invaluable in the coming years. Learning to fix everything on them would save you a lot of money when the time comes.

[@pristinevending]

Man, I wish I could say that was an easy lesson for me to learn. It took a few bumps on the head and I’m still learning. But experience is the best teacher. 😄 Thank you

[@junewho]

Invest in a step drill bit. One bit for a wide range of sizes. Has come in very handy. I drilled an extra hole for the antenna as well.

[@pristinevending]

Such a great tip. 💯

[@GrubbyChucksVending]

This is exactly what we used and it made pretty quick work of that huge middle hole

[@renaissanceresins]

This is amazing information although you left off the main detail where is the link for the ADAPTER you purchased?

[@ernesto8290]

Props on the transparency for that mistake. Its easy to overlook things especially when you're new. Keep up the good work.

[@pristinevending]

Transparency is the best way show the ups and downs of this business 😌 thank you for tuning in 😄

[@davidclements4937]

I just want to say thank you for this video. My brother and I are making changes and vending machines are our first step to making passive income. I wasn't sure on the difficulty for installing a card reader and you made it very easy to understand. So thank you.

[@chaundadon2612]

Brother, I been watching your videos for a while, thank you for your realness & transparency… a lot of other vloggers only show you results or how to start up… happy hustle

[@pristinevending]

Thank you 🙏🏽 and thanks for staying locked in with me. 😌

[@t.soreal5610]

I’m so glad i came across your video! this whole time I’ve been wondering how in the hell was I gonna plug up my vending machine from inside of the storage unit it currently at! you just put me on game hopefully it works for mines!

[@pristinevending]

Glad to help 😄 Just fyi, do not plug a machine up with the ac compressor still connected (drink machines). That's a great way to blow a fuse.

[@godmaker99]

Glad I saw this I was gonna buy a vending machines with card reader for 415 more when. I can do it my self for what seems like 300 less

[@VendingMachineVlogs]

This video was pretty easy learning how to install my machines

[@CoolBanana]

you know, i clicked on this on a whim but man i wish pc build channels were as real as you, this is very much an equivalent to many mistakes i've made when upgrading my pc, and not one channel would suggest what to do, which is frustrating because how am I supoosed to learn when they just expect you to already know, if I knew I wouldnt be watching a tutorial, I dont think ill be owning a vending machine anytime soon but I was really interested the whole time despite that. Great Video!

[@brickztheproducer6931]

really needed this video. thank you brother for your honesty and realness acknowledging your mistakes and providing info to correct them as well. Me being a new vending owner this was needed

[@pristinevending]

Thank you 🙏🏽

[@brickztheproducer6931]

@@pristinevending no problem 🙏🏽

[@drvending]

Don't know if you've found out since this video..the cardboard guide that comes with the Vpos does seem like the holes a bit off..that's because it was backwards. Next time your installing one, flip the cardboard so you can't see the writing (drill sizes etc) this way it lines up perfectly to both the aerial cable and your yellow comms cable. Both cables with fit through the one big hole. Been in the vending trade in Scotland for over 20 years, great industry and every day is different. Although mostly raining..lol

[@pristinevending]

Thank you so much for that tip. I knew something couldn’t be right. 😅 I will definitely do that going forward. And that is some accomplishment, 20+ years. That’s what I call motivation. I guess it’s no point in me asking you if you enjoy it. 😄 I wish you the best. 😌

[@JamesMartin2014]

Drill a smaller pilot hole then use the bigger bit. It'll make it much easier.

[@pristinevending]

I’ve learned this the hard way 😅

[@hendo420]

You will probably have to get an mdb bill validator AND mdb coin mech for this to work. Most soda/vending machines will only use one protocol at a time. So you can use either MDB or you can use the 9pin pulse stuff but not both at the same time.

[@NiaNaomiBusiness]

That what I’m thinking is going on with my 9 prong. I followed his instructions buying the 6 prong adapter but my older machine won’t configure

[@vendinomics250]

One of the biggest lessons I have learned is not buying the cheap machines that cant take card readers. I do all my own maintenance work. Trying to source parts is hard. You are stuck buying from feebay or places like that because they dont produce them anymore.

[@pristinevending]

You hit the nail right on the head! I learned that exact same lesson the hard way.

[@vendinomics250]

@@pristinevending hey where did you get the adapter for the older machines? If you ever need help with any maintenance work brother hit me up and I can walk you through. I have dozens of videos I need to upload about different things for maintenance on machines. Tbh when I first started I was like I can just look it up on KZbin. Boy have I been wrong. Not many actual maintenance videos out there for machines

[@rexhenkle3377]

Some advice on drill bits. They are not all created equal lol. Cheaper made ones tend to get dull much faster. My preference was titanium coated ones for metal. If you don't know there are specific bits for metal and wood. I worked in an office industrial plant for 27 years and did a lot of work on machinery before they finally added 3rd shift maintenance person.

[@pristinevending]

You are 100% correct about that. I'm pretty handy with my tools also from years of experience. But my drill bit game can use some improving. 😄

[@adam8905]

Great to watch your videos Pristine! -Malaysia

[@pristinevending]

Malaysia, Wow Super Awesome! Thank you Adam. 🙏🏽 You just gave me so much motivation. 😄

[@pristinevending]

Enjoy this Discount off all Nayax devices: nayax.pxf.io/c/3877411/1742155/15225 COUPON CODE: "PRISTINEVEND".

[@A_Lazy_Bori]

I support the real so you got yourself a new sub my friend. Keep grinding Never stop!

[@pristinevending]

Thank you for locking in 🙏🏽😌

[@txkevin0326]

A really solid install video-with all the bumps and bruises we're likely to come across. Can you tell us (me) more about the connector you bought that made it all possible? I know you said you bought it on ebay--but it really saved the install, right? More info on that would be appreciated!

[@pristinevending]

Thank you 😄 I’ll have to get back with you when I can find the information on that harness. It did save the day. 😁

[@kingj2508]

Really enjoy the vending videos.. keep up the great work. I really want to get into doing my own vending machine business as well... I would recommend a unibit for the bigger hole on the card reader.

[@pristinevending]

You know I discovered the unibit right after making this video. 😅 Thank you for the love. 🙏🏽 Don't be a stranger.

[@FatRedguy]

You inspire me so much to do this bro 💪💪

[@pristinevending]

That’s so awesome, thank you so much for letting me know that. It’s a fun hustle for sure

[@cacaokingdom3122]

I have an older machine that wasn't card compatible. However my mainboard destroyed itself so I upgraded the mainboard to a Inone board that made it compatible with new bill/coin accepters as well as card readers.

[@pristinevending]

That's usually what you have to do. Did you upgrade the board yourself?

[@thejadeazariah8580]

Thanks so much for this video and I love your spirit! So positive !!!

[@pristinevending]

Thank you so much 😊

[@pottsvending]

Do a video on setting up the Nayax account. Bc they talking about two weeks to setup my account, and this is my 1st card reader so I been looking for a video to make sure I’m doing everything right

[@pristinevending]

That’s a great suggestion, I’ll definitely look into doing that. So they took about 3 weeks for my process to complete and in the mean time I just verified with them that nothing else was needed from me.

[@pottsvending]

@@pristinevending thank you bro for the info. I was hoping I did do nothing wrong it been about 6 now days, so I guess it take time thanks again

[@joeyRRR]

@@pottsvendingHow’s the vending going so far?

[@pristinevending]

Enjoy 7% off all Nayax devices, just for The Hustle Family 😄: nayax.pxf.io/c/3877411/1742155/15225 COUPON CODE: "PRISTINEVEND".

[@julianvanekeren5577]

Great work! I was wondering how you find and contact new locations? Also, do you pay them a fee for letting you putting the vending machines there? Thanks man! Keep it up!

[@pristinevending]

Thank you 🙏🏽 and it’s so many ways to get a location. I’ll post some videos about this soon. And I don’t pay commission to my locations. 😌

[@whoskrtyt1711]

Yeah I would like to know the same thing. How to establish a new location and what it takes

[@supermonk3y07]

Great video do you have one showing how to install in the light? My snack machine looks too dark

[@pristinevending]

Thank you 🙏🏽 I do have a LED light install video. It was actually one of my first videos. I’ll link it here: Installing LED Lights In My Vending Machine | DIY Install kzbin.info/www/bejne/q6vSkGmAfM1rrck

[@supermonk3y07]

@pristinevending oh thanks! I was looking how to install the fluorescent bulbs. Are LEDs better than the traditional ones?

[@icy18712]

Hey you should get a Go Pro camera with a harness so you can use both hands.. just a idea

[@pristinevending]

That’s definitely a great idea. 💯😄 I actually just got one and put it to use in my last upload. Please check it out and let me know how that footage looks to you. I’m getting use to the new angles of the GoPro. This Is How Much My 7 Vending Machines Made In 2 Months! kzbin.info/www/bejne/paiwomhrp5yKlZI

[@rosereport7443]

Thank you for your efforts and much success to you! Happy Hustles🙏🥰🙏

[@pristinevending]

Thank you so much. Happy Hustles 🙏🏽😌

[@powermiller855]

🙏🏽 happy hustles my brother 💪🏾

[@pristinevending]

Happy Hustles 😄

[@Nickunder0925]

Found you on Instagram reels, keep being awesome man love your stuff.

[@pristinevending]

Thank you so much and thank you for taking the time to comment. 🙏🏽😌

[@nancyosborne-webb646]

Worked great for my craft show

[@willli2791]

Thank you for the instruction video! I am a newbie starting out was about to pay at least $100 per Nayax install lol... Where did you get the adaptor cord for the Multi Drop Bus?

[@damiendemesa]

I would also like to know this. Great video btw I was very confused for a while on how to install a reader

[@preslenalteus9757]

Did anyone find out about the adapter ?

[@pristinevending]

remind me to make a video for that with in the next week. Comment under my latest long form video, so ill see it. 😌

[@amilcarherrera590]

Hey where can I find the adapter?

[@DamnCRob]

Love the vid!

[@pristinevending]

Thank you 🙏🏽

[@mr.megatron9146]

How do i buy that adapter for- non card compatible vending machines sir?

[@jerryconda]

did this actually work. i know that sometimes even if you get power to the card reader not all boards are compatible.

[@pristinevending]

That is a great question. I sold the machine before I had a chance to test it out. I'm wondering the something now.

[@Blankboyytv]

Hey man what was the adapter piece that you bought called? My vending machine is a 9 prong too and needs to be a 6

[@latanyasingh9248]

I'm learning so much ❤️😘

[@pristinevending]

That’s so great to read 😌

[@FatRedguy]

Another video lesss gooo

[@pristinevending]

Less gooo! Happy Hustles 💸😄

[@Sh-vh9ce]

Hi, thanks for the video. What was the adapter cable called you us to buy ?

[@alexiagutierrez7411]

You are awesome thank you so much. Very helpful ❤

[@pristinevending]

I'm glad you can enjoy my content. Thank you for tuning in.

[@georgebarrera5853]

great video! where did you get the adapter? what is it called?

[@pristinevending]

ill make a video on this very soon

[@nfosterofficial8798]

@@pristinevending has the video to this been uploaded yet

[@taoisttiger4702]

Cool video thanks!

[@pristinevending]

you know it

[@josephbaggett6022]

Hey man I just subscribed. I have always wanted to get into vending machines. My question is what kind of split or deal are you working out with the locations? Thanks

[@pristinevending]

Welcome to The Hustle Family 😄 Thank you for locking in 🙏🏽 And I actually don’t pay commission for my locations.

[@dallama2616]

@@pristinevending does this mean they just let you set up for free?

[@Countrystyleboutiquellc]

Do you know if that will work on my AP 113 vending machine? I’m new to this. Any help would be greatly appreciated.

[@pristinevending]

I would have to do some digging. Join the Pristine Vending Email Club to stay In touch. I’ll be releasing new ways for us to communicate soon.

[@ohyeahthatsright3155]

Thank you for sharing this. Did you use the Dex cable on the card reader or is it not needed? Thank you

[@pristinevending]

it wasn't needed on this machine

[@danclare6924]

How do you buy your machines? Refurbished, new or used? How much does it usually cost?

[@pristinevending]

I buy used and refurbished. I’ve actually never had a brand new vending machine. No need. And you can find a decent machine for around $7 or $800 in my area.

[@gelther1]

Where did you order the adapter cable from I need one asap please. Thanks

[@pristinevending]

I'll have to find it again. I'd start by googling "multi drop bus cable".

[@POTTERSWORLD86]

Where is the link for the part please.. great video

[@coolguyreal3550]

any luck?

[@pristinevending]

I'll be making a video on this very soon.

[@pristinevending]

very soon

[@jameskusi-appouh5181]

I have the same exact machine with the same issue Does anyone know where I can find that Multi drop adaptor?

[@nfosterofficial8798]

Hey did you ever find out where to find the adapter ?

[@raulrubio7736]

Hey brother where did you get this cord and what is it called exactly? I really need it! Thank you!

[@pristinevending]

I will have to go through some records and get back with you on that. If you don't hear back by tomorrow then please leave another comment. Just in a new thread, so I'll get notified.

[@jamielynnbutler1492]

This video made me not want to give up lol

[@soundswithapurpose5530]

How do you program it to take card and when it takes the payment the machine knows the payment is taken

[@pristinevending]

You just plug the card reader in and that’s it. No programming required, long as you have a card compatible vending machine.

[@Sonny9er]

Do you need a cellular network for the device?

[@pristinevending]

The company provides that with your service.

[@Boat392-f5p]

So with that adapter would it basically work on any machine?

[@pristinevending]

…On machine with the “drop-bus” slot, in theory.

[@hisson1984]

Im looking into starting my own vending machine business can you help me out and tell me how i can go about it. Where do i buy the machines how do i get stores to let me put my vending machines in there buisness thanks for the help

[@pristinevending]

Thank you. Consider joining my email club to stay up to date with me. I’m hoping to have new ways for us to communicate soon. Here’s the link to join my email list. Be sure to lock in. pristinevend.ac-page.com/email-list

[@nicolemorton9853]

Where did you get the compatible cords from? What website?

[@pristinevending]

I'll be making a video on this very soon.

[@DanielleAugustine-od8ql]

I see a lot people asking whats the name of the adapter for the card reader can you please tell us whats the name.

[@SamanthaRoseResidential]

Great video!!!!!

[@pristinevending]

Thank you 🙏🏽

[@elindigeno1215]

I bought a vending machine with a card reader. Should I replace it? The previous owner said ia working

[@bfitfitness7360]

Hi Pristine, Im new to Vending and need to add the card readers. do I need to purchase a new control board or just purchase adapters? none of my machines are compatible with the card reader. I appreciate your help,

[@pristinevending]

I’d have to do some digging to figure that out. Join the Pristine Vending Email Club to stay In touch. I’ll be releasing new ways for us to communicate soon.

[@DomTMOtv]

I am looking for the link of the adapter you used .. do u mind sharing that with us ?

[@veronicadarnell7382]

How do you set prices for each product on Nayax?

[@pristinevending]

Nayax doesn’t require you to set prices on their devices.

[@Santilopez-o3o]

How to install one on a older model how does it work what do you connect it to, to work

[@pristinevending]

older machines would have to be upgraded

[@michaelelliott5998]

What's the make and model number of this vending machine? Also, where did you find the 6-pin adapter/converter?

[@preslenalteus9757]

Did you end up finding out about the adapter?

[@cullenwilking7489]

Where do you get the stuff?

[@cullenwilking7489]

Like links

[@pristinevending]

Nayax website or google the parts needed.

[@ridwan_ad]

Hi bro where did you get the adapter? Keep up the good work bro💪🏽💪🏽

[@pristinevending]

I have to go a find the website. If you can, write me back tonight to remind to get that for you.

[@ridwan_ad]

I’d do that. Bless

[@ridwan_ad]

Hi bro just reminding you. About the website. Bless

[@trinityjohnson8810]

@@pristinevending hey what’s up with that adapter ? I’m trying to find it as well

[@nfosterofficial8798]

@@trinityjohnson8810me as well did you ever find out ?

[@BITW_Guzman]

How do you connect your bank account to the card reader?

[@pristinevending]

You work with the Nayax team to get everything set up.

[@VendingMachineVlogs]

So this machine we don’t need upgrade the board just get adapter????

[@darotweiler7]

I have a crane 158 I had to upgrade to be mdb compatible. I used the adapter cord as you instructed it I’m getting a V00 error on the Nayax reader which means the reader can’t communicate with the VMC. Did you have this issue? And if so how did you resolve it?

[@cierra2020]

What the name of the cord I’m having the same issue

[@cierra2020]

What the name of the Abdator cord that you installed

[@thedreamplace3588]

My machine has a nine and a six prong one coming from the bill acceptor and one coming from the coin mag is it still compatible?

[@gamerzlane936]

Did anyone find out what cable adapter was used? Much thanks

[@pristinevending]

I'll be making a video on this very soon.

[@tomnugent5]

where did you get the adapter cable from and whats it called?

[@pristinevending]

Can't remember for this video but on average I spend around $300 to fill them all.

[@VendingMachineVlogs]

I have this same machine how u upgrade automatic products the motherboard I have I have to upgrade do u have a video of that for that machine u have to be mbd

[@pristinevending]

Hey so I did not have my machine upgraded in anyway. The adapter that I used plugs right into the “abt bus” slot. Have you already done that part? Leave “#happyhustles” at the end of your comment so I can get back to this thread.

[@VendingMachineVlogs]

@@pristinevending hey fam my machine I brought from the person said I need upgrade the board which going cost me $475 and when I see your video I have the same machine I do have the milt bus drop but I haven’t didn’t that yet idk where to find the adapter

[@VendingMachineVlogs]

@@pristinevending did u have to change the coin mech out too or no

[@VendingMachineVlogs]

@@pristinevending do your machine bend the items is it still working

[@blogaccess1on177]

What was the name of the piece that you stuck in the MDB port for machines with nine pins?

[@pristinevending]

I’ll have to find that for you.

[@blogaccess1on177]

@@pristinevending Okay, cool, thanks.

[@LetMeSayThis706]

I just subscribed.

[@pristinevending]

Welcome to The Hustle Family 😁💸

[@morganhartvigsen5163]

Do you have a link for where you got the chord?

[@TimmoTV26]

Can you add a card reader to any vending machine or is it a certain machine?

[@MikeLowry214]

Do you need a new board to upgrade in order to be compatible with the card reader ?

[@pristinevending]

more than likely

[@JoseVazquez-nn2oc]

How do we get started? Is there a vending machine company?

[@pristinevending]

You can start by joining my email club to stay locked in with me.

[@buttondeity3933]

bud did this actually work for after testing?

[@pristinevending]

It did while it was in my storage unit. I sold this machine before I had a chance to place it.

[@JPPrewer89]

Where does the antenna get mounted?

[@pristinevending]

The antenna is magnetic. So I usually stick it to the top, of the INSIDE, of the machine. I don’t stick them outside of the machine, not just to avoid vandalism but because ppl tend to set things on top of the machines. Like it’s a shelf.🤦🏽‍♂️ And that can knock the antenna over also.

[@JPPrewer89]

@@pristinevending gotcha thank you for your reply.

[@badhacks2987]

what vending machine you using

[@shydinero6697]

What is the link to the cord ????

[@prismsiqduarte125]

What does mdb level 1 or 3 mean

[@pristinevending]

In what context? I can’t say that I’m too familiar with that.

[@alexz6062]

What’s the name of this adapter called?

[@pristinevending]

I can't remember. I'll have to look it up. But it plugs into the "drop bus" plug on the motherboard.

[@NiaNaomiBusiness]

Is this machine an automatic product?

[@pristinevending]

I think this is an LP snack machine

[@tastysmokebbq]

Where did you find the adapter?

[@pristinevending]

I had to google it.

[@chillfriendlysounds5764]

Where did you get the adapter for the card reader?

[@pristinevending]

Some site I found on google. I'll have to go back and find it again.

[@Shannon0hh]

Hey do you have refund slips!!? I work for a vending company and man these machines some of them be stealing people money all day!

[@matthewm3384]

What’s the adapter you used?

[@pristinevending]

Ill have to look it back up to find what it's called.

[@PrettyNFitShaz]

Where did you get the adapter from?

[@pristinevending]

Thank you. Consider joining my email club to stay up to date with me. I’m hoping to have new ways for us to communicate soon. Here’s the link to join my email list. Be sure to lock in. pristinevend.ac-page.com/email-list

[@dawnbrenner8482]

So what I learned is even if the machines not card reader compatible it’s still compatible via an adapter lol 😂