How to install a Centurion D5 Smart gate controller - track, rail, earth, safety beams - all steps
Пікірлер: 77
@MosesMamogale2 жыл бұрын
This by far the best DIY guide ever. You can instruct the dead yo walk again.
@ecologicaltime2 жыл бұрын
thank you!
@stenfordmotswiane21 күн бұрын
Thanks for the video and sharing your knowledge with us public thanks you
@kwijukaderek4682 Жыл бұрын
This is well elaborated and I am happy that u don't leave anything out thank u sir
@jrjakkals Жыл бұрын
Thank you Philip for all your videos it really helps a lot - really appreciate it
@colinhudson90412 жыл бұрын
Been installing and a tech for 20 years plus . Good vid well explained and will help a lot of guys . Done a lot of the swing to slider conversions and pretty much like you do .
@ecologicaltime2 жыл бұрын
thank you
@sherifhamdy9229 Жыл бұрын
I'm comparing this with the V2- Ayros and Somfy. What do you think
@moemotala67583 жыл бұрын
Great video. Well explained. Nice visuals. Great audio. Well done. Got all my tools, just scared of welding.
@touchlessgatessrinagar54083 жыл бұрын
Welding is easier than that levelling and measurements ! For me
@KeasDad2 жыл бұрын
you are a God sent my man. i watch all your videos . i cannot tell you how much i have learnt and continue to learn from your channel . THANK YOU THANK YOU THANK YOU , so very much ,
@bonganimdluli9657Ай бұрын
Thank you this was so informative. All in one full training
@stevelaskey10942 жыл бұрын
Wow! Excellent video. Thanks a million.
@peterseletela46212 ай бұрын
The Best tutorial video ever❤❤❤❤
@topelitetutors Жыл бұрын
Thanks. Perfect guides. Thanks again!!
@lipozor2 жыл бұрын
Great input! Thank you
@nevioussibanda6521 Жыл бұрын
The D Smart series are the 👌 best
@ecordy Жыл бұрын
Wow. An extremely excellent and helpful video.
@KevBotes3 жыл бұрын
Hi, as usual, awesome video. You should get your self some skateboard knee pads instead of a cushion.they work wonders for comfort while kneeling.
@ecologicaltime3 жыл бұрын
Thanks for the tip!
@alecthabangtshabalala25872 жыл бұрын
true what i also noticed
@vaughanza Жыл бұрын
excellent video, explained well, thanks
@mosesmolebatsi3933 Жыл бұрын
Beautiful piece of innovation...smart series
@collenverengera87903 жыл бұрын
Well explained... Awesome
@truplayez5133 жыл бұрын
Excellent video
@colinmakams3 жыл бұрын
This is an swesome video!
@stevince784510 ай бұрын
Good I learning more to you
@kalysidibe98122 жыл бұрын
Hello Ing Please from the power supply coming to the gate one needs to obviously have a DB box before connecting to the earth bar am I right?
@barrypeters51368 ай бұрын
Fantastic video
@ashrafkarjiker6888 Жыл бұрын
Is the angle iron rail solid for any gate
@alwaysfriends8402 Жыл бұрын
How different is the base plate of the D5 Evo from that of the D5 Smart, I would like to replace the D5 Evo but do not wish to move the plate?
@jeevanaidoo11543 жыл бұрын
Excellent
@primemusic9868 Жыл бұрын
How or where can I get those spaces used for setting the gear Rack
@Advans-computer7 ай бұрын
Good job thanks you sir
@favouruboh576624 күн бұрын
Can I open my gate remotely even if I am away from the country
@jacovdwalt71211 ай бұрын
Good video thx
@proitsolutions4463 Жыл бұрын
Hello well explain! Could you please show us how to connect a gate motor Flash light to the D5 Smart ???
@garycburn Жыл бұрын
Thank you
@hiltonzvidzayi1782 жыл бұрын
Excellent video. How do I activate auto closing?
@ecologicaltime2 жыл бұрын
thank you, pls use the app to set auto close.
@christianmwamba2915Ай бұрын
Awesome a
@hiltonmagasela68222 жыл бұрын
Been uneasy advertising the Smart to my clients, been happy with Evo as I install it in three hours all by myself. But your explicit demonstration has boosted my confidence and would like to thank you. Just another question, been using lip channel instead of angle iron for railing, which one is the strongest?
@ecologicaltime2 жыл бұрын
thanks. In terms of the lip channel, i am not sure which is stronger as now there are rollers that are shaped for both round and angle.
@Sir_Gee2 жыл бұрын
Have you ever installed the raz racks? They are failing me
@KeasDad2 жыл бұрын
this guy is a life saver , i was struggling with a few alarm and cctv settings . he came to my rescue .
@vhutshilomoses79193 жыл бұрын
Best video
@ecologicaltime3 жыл бұрын
thanks
@ZeroaxeSA3 жыл бұрын
Dankie dat jy die tyd gevat het om die hele installeering op te neem, verduidelik en op youTube te sit. Ek sal defnitief hierdie gebruik om my installeering te doen. Op die internet het al geleer om nie te kritiseer nie, omdat mense die werk GEDOEN het. En baie goed wat ek al gekyk het sal ek nooit aan pak nie. Maar ek wil net graag die volgende sê:" As n Boilermaker/fabricator, wanneer ek na die sweis werk skrik ek. Ek hoop dat jy by nou al baie beter kan sweis met n Arc Welder. n Arc Welder is self nie een van my sterk punte nie. Maar n enkel fase MIG Welder (hier by ons nouem hule dit inkorrek n "CO2 welder". Weet nie hoekom nie, want CO2 gasse word nie gebruik nie. Maar in elk geval.....) sal jou kwaliteit werk net soveel beter maak" Soos ek sê, ek kritiseer nie, dit is maar net n opinie. Weereens dankie vir die video.
@ecologicaltime3 жыл бұрын
thank you, my welder is very old and i would like to change the method of my welding.
@andemwalwanda3 жыл бұрын
@@ecologicaltime I would like to order Centurion D5 motor online. What is the link to your online store?
@ashrafkarjiker6888 Жыл бұрын
How did you remove the pinion spider
@ashrafkarjiker6888 Жыл бұрын
Is this arc welding
@atusayemwalwanda54132 жыл бұрын
why dont u work at centurion supoort to me ur 120% best teacher
@ecologicaltime2 жыл бұрын
thank you
@jacquesp44083 жыл бұрын
Can a D5 Smart fit onto a current D5 base plate or will the D5 plate have to be removed and the D5 Smart plate installed?
@rabidbunny30253 жыл бұрын
According to the manual (www.centsys.co.za/pdf/PROD/SMART/Centurion%20Systems%20D5-Smart%20installation%20manual.pdf) ... 7.2. Retro-fit Installations (existing sites) The D5 SMART has been designed to retro-fit into most existing D3, D5 or D5-Evo installations, with the following provisions; * If the unit is installed with the gate in the closed position and the unit on the left-hand side (from the inside of the property), the rack should extend at least 75mm past the centre line of the existing pinion * If the existing unit is mounted with the maximum clearance to the foundation plate, the new unit will require that the rack be re-adjusted to obtain the correct mesh between the rack and pinion, as the existing bolts will be too short If the existing foundation plate is in a good condition, it is not necessary to replace it with the D5 SMART Foundation Plate. ****** However, ****** if the existing foundation plate is corroded or needs to be replaced for whatever reason, the D5 SMART foundation plate can accommodate the existing footprint without the need to re-route cable conduits.
@WheelchairTravelbyDEVAN3 жыл бұрын
No need the old base plate will work for any centurion motor no need to install new d5 smart plate it will fit existing d5 base plate no problem
@WheelchairTravelbyDEVAN3 жыл бұрын
No need change base it will wirk for d5 to d5 smart becos both use same bsse plate
@ricoduplooy24332 жыл бұрын
Is it possible to add a courtesy light to this gate motor?
@ecologicaltime2 жыл бұрын
yes definitely.
@candidomagalhaes33572 жыл бұрын
Hi, my d5 smart not accept define limits, on screem show LOST. Need help please. Tks.
@ashrafkarjiker6888 Жыл бұрын
Do you need to take building course to lay the concrete foundation
@ecologicaltime Жыл бұрын
No
@ashrafkarjiker6888 Жыл бұрын
@@ecologicaltime I’ve done the d5 evo training at centurion but haven’t learnt the concrete foundation for the gate rail
@ashrafkarjiker6888 Жыл бұрын
What depth is the concrete foundation for the gate rail
@shanyialexander3 жыл бұрын
👍🏼
@mosesmassaquoi78184 ай бұрын
❤
@BrownieloveMike2 жыл бұрын
Hi Where is your business based?
@ecologicaltime2 жыл бұрын
thanks! great car and good engine, strong naturally aspirated engine, the new ones are running very hot, needs twice as much maintenance!