I've rarely seen one where the sides of the threshold weren't installed below both sides of the aluminum frame (a pre-installed aluminum door)...Good luck in getting those frozen stripped pivot screws and threshold out.... You usually do not have to take the usually stripped frozen screws out of the top pivot to remove the door. There is usually a poke hole visible from the top to insert a tool to push the spring loaded pin down. If there is no hole (like seen here) simply drill an 1/8" hole from the top and push the pin down with something....It's hilarious that the "leg" was pre-cut off (1:25) from the rest of the bottom pivot assembly before the video was made to make this look like a 5 minute job...
@19jaredbarsuglia818 жыл бұрын
nice video. Definitely helped that there was no stripped screws or caulking :) Thanks for showing you using the riser set screws. the Allen heads that drive downward prevent the weight of the door from rocking and snapping the pivot prematurely. Seriously, nicely done.
@SWISCO8 жыл бұрын
Hi Jared, We are so glad you found it helpful, thanks for letting us know!
@Stop_the_cap3112 жыл бұрын
So for the Allen heads that drive downwards tighten them all the way down after you install the door or before?
@justgonnagetbetter10373 жыл бұрын
Informative, well made and to the point. Thank you sir!
@The39245 ай бұрын
This is a great video.Thank you so much.I'm working on a commercial door and this has been excellent.Very informative, very helpful.Thank you once again.Continue to keep making videos.Because there is people out hear that.Appreciate the videos.
@visionofcomplexity4 жыл бұрын
That was a very clear and helpful video. Thank you.
@arod4uandonly1 Жыл бұрын
problem is I have yet to come across a pivot hinge where it was easy to remove as shown in the video lol
@jorgecampos58403 ай бұрын
😂 facts
@Closinggapsincdoors8 жыл бұрын
We just finished replacing a couple of sets of worn offset pivots today.
@christophersboland7 жыл бұрын
This is a great video - Very informative. Thank you!
@StingRayPartsWashers6 жыл бұрын
Excellent video, thank you
@CandidCorndogАй бұрын
Aren’t you the poor guy who got punched by that cop? I love your dog!
@matthewkontos6 жыл бұрын
Nice install, job well done!
@sorcerykid6 жыл бұрын
Great video, I need to replace a storefront door bottom pivot and was fearing I'd have to pay a locksmith $200 or more dollars for what could probably be just a 30 minute DIY job!
@3ccountry2 жыл бұрын
How is right or left handed opening determined? From the inside or outside view?
@floridaboy99429 жыл бұрын
Hey thanks you've been a big help...!!!
@thakorpatel85437 жыл бұрын
How many different type of Pivot ? Video is best and in detail, simple to understand if more video please
@whitesheatingairappliancer71016 жыл бұрын
Thank you for the video.
@nicklaus4444 Жыл бұрын
What if the door doesn’t just come out of the bottom pivot when you unscrew it from the top. No screw or anything. I thought maybe there was a cap covering a screw but nothing comes apart on the bottom pivot
@JTThompson-jy3fc3 ай бұрын
Great video
@jimmythorpe43685 жыл бұрын
I'm still waiting to find the door were the threshold screws come right out
@Wooster777 жыл бұрын
Great video. You just saved me $100 or whatever a pro would have charged me. Thanks.
@SWISCO7 жыл бұрын
No problem! You can leave it to SWISCO to put a dent in any window repairman's wallet.
@Thomasz126 Жыл бұрын
My top pivot has a small wobble causing the door to lean. Is there anyway to a quick repair or do I need to replace the pivot?
@DamonCastillo Жыл бұрын
I have that problem too! I'm wondering if I can just replace a bushing for a quick fix...
@jpcastelli48697 жыл бұрын
So helpful- thank you!!!
@thatdudej-chi6 жыл бұрын
That was awesome.
@noidretlaw Жыл бұрын
very helpful...thanks
@retailmsc4 жыл бұрын
we usually clean all the grime and debris from the door and sweep the dust from the threshold.
@thwolff18194 жыл бұрын
What size pivots are those?
@SWISCO4 жыл бұрын
These particular pivots are 1/8".
@kmcpherson42 жыл бұрын
Do you have to have a threshold to make this work?
@artmitchell62803 жыл бұрын
Where can I buy a bottom pivotLocally we have to get that door fixed by the end of the day thank you very much
@sukhpreetsingh47743 жыл бұрын
How to you find out what type pivot offset I need or they universal
@fredsmith901 Жыл бұрын
You’re a Legend!!!!
@BugzNBeanz2 жыл бұрын
At 0:53 what are the size screws needed in the top header above the top pivot?
@SWISCO2 жыл бұрын
Hi Brandon. The top pivot uses 3/4" 10-24 screws to fasten into the header.
@floridaboy99429 жыл бұрын
I am installing a Kawneer Pivot door inside a warehouse. In the place where its gonna be installed there are french doors. So i'm gonna have to remove the french doors and build in so that the Kawneer door will fit. My question is....is it possible to mount the Kawneer frame to wood. I hadn't been able to find this type of install online yet.
@SWISCO9 жыл бұрын
+floridaboy9942 If you want to install a new commercial door pivot, we suggest you remove the complete French Doors and frame and then install a new commercial door frame inside the opening. We don't recommend trying to install the commercial door pivot in a wood door (French Door) frame.
@floridaboy99429 жыл бұрын
I have the actual comercial frame..my question is once I close in the french door opening to make the pivot door frame fit is it ok to mount the comercial frame to the wood
@SWISCO9 жыл бұрын
+floridaboy9942 Yes, as long as you have the correct amount of depth, width and height available on your wood frame in order to fit your commercial frame.
@gito25553 жыл бұрын
Where I can buy the part and how I know is the right part
@SWISCO3 жыл бұрын
The 79-128 can be purchased here - www.swisco.com/Right-Offset-Pivot-Arch/pd/Replacement-Commercial-Hardware/79-128 You'll want to compare all the dimensions to your original to make sure it's a good replacement. You're also welcome to send us a photo of yours and we can let you know what we think. www.swisco.com/page-id-part
@obyako368 жыл бұрын
biggggggggggggg helppppppp thanks
@LIGIADZIEZIC3 жыл бұрын
You would think he would clean out all the dirt from under the threshold and the threshold itself ???
@dbguy66638 жыл бұрын
Its nothing like that after about 15 Chicagoland winters.
@FunknGrvn6 жыл бұрын
I'm in KC was thinking the same thing. When do the threshold screws ever simply unscrew. Ha!