HOW TO INSTALL A HAAS UMC 750 MACHINE IN MASTERCAM 2018

[@maleklaban1880]

Can you please share the files for the HAAS UMC 750 on the Mastercam, the files you have used to define the machine?

[@сергейданилов-ш1х]

Hello, please tell me how to change the direction of rotation of the "A" axis in Mastercam Machine Simulation

[@didiz01]

Hey! I run a UMC750 daily now and it would be great to have a full machine simulation, is there any files or Stl`s I can download or can I download the files you're using somewhere?

[@edchow3361]

You can find it here: www.haascnc.com/Community/Events/umc-750-us-ca.html Click "3D MODEL (ZIP)"

[@maleklaban1880]

@@edchow3361 Can you send a new link for that files, that link does not work, please

[@coryforrester3242]

would love to get updated stl files !

[@nhfaadhilah]

can you teach me how to create a machine on mastercam lathe? I really need your help, thank you

[@issamelmahmoudi3297]

Yes sure, do you have something specific you don't know, or you want to learn it from the beginning?

[@nhfaadhilah]

@@issamelmahmoudi3297 i want to learn it from the beginning

[@nhfaadhilah]

@@issamelmahmoudi3297 can you tell me what should i do first?

[@issamelmahmoudi3297]

First you need to have the machine parts in stl form

[@nhfaadhilah]

@@issamelmahmoudi3297 what should i do next?

[@liouaneomran2129]

hello i need hass 3x poste processeur

[@brbapapabarbapapa9923]

Hello Issam .Can you show haw set up 3 axis machine in mastercam ???

[@issamelmahmoudi3297]

sure but till sunday

[@brbapapabarbapapa9923]

thanks

[@issamelmahmoudi3297]

You welcome i'm looking for a 3 axis machine now when i find it i'll make a video about it

[@issamelmahmoudi3297]

You welcome i'm looking for a 3 axis machine now when i find it i'll make a video about it

[@brbapapabarbapapa9923]

I got 2 machines if you want I can send you on your email .I set up the axis config ,but I am stock when you want to set up X and Y .I do not sure with stl,file set up for x and y

[@gilbenedito6456]

@Issam El Mahmoudi can you send me those files please ??

[@hienaz723]

i dont know why after i add all componet to create machine simulation then i ran simulation . Machine like very small compare to tool ans stock.

[@issamelmahmoudi3297]

Maybe the size of the component is very small you need to resize them in mastercam or Solidworks or any other software

[@hienaz723]

@@issamelmahmoudi3297 Thank i just figure out yesterday but i have another issue . i believe i save all component in metric stl. then when i try to run simulation i got an error " about configuration of machine ? i normal work with inches unit

[@issamelmahmoudi3297]

@@hienaz723 I think you didn't save it in the right folder or with a wrong name,..if it didn't work try to build it from the beginning and save just the axis configuration then open the machine again and upload the component to the axis and save it, and remember the machine folder and the axis configuration file need to have the same name

[@hienaz723]

@@issamelmahmoudi3297 thank you my friend i got it work but still have a little bit issue . my stock button unable so i can not see material remove like yours when i run simulation

[@ivansanchez8489]

HI..WHERE CAN I FIND THE FILES UMC 750 HASS THIS FILES: HASS UMC 750 JPG FILE TABLEREFLECTION FILE BMP FILE

[@issamelmahmoudi3297]

grabcad.com/library/haas-umc-750-for-machine-simulation-1

[@ivansanchez8489]

@@issamelmahmoudi3297 thanks bro its working good thanks a lot

[@ivansanchez8489]

one last question--_ whre can i find the post umc750

[@issamelmahmoudi3297]

Sanchez you welcome bro, the post processor, I think this one you can't find it, you can only buy it if you know someone or modify a 5 axis fanuc post to suit this machine!!

[@namtuhuyt551989]

Can you please share the files for the HAAS UMC 750 on the Mastercam, the files you have used to define the machine?