HOW TO INSTALL A HARDWIRE KIT AZDOME JYX04 Dash Cam Hardwire Kit 3 Leads STEP BY STEP INSTRUCTIONS

I will demonstrate step by step how to install a hardwire kit into your vehicle. I will explain how a hardwire kit works and how it works with parking mode. I will explain what is a constant circuit and a switch circuit. I will demonstrate how to find a constant fuse and a switch fuse. I will also show you how to connect the fuse taps, install the fuse, and how to install the fuse taps.
AZDOME HARDWIRE KIT: amzn.to/3EybeFK (Amazon) Micro USB
HARDWIRE KIT Accessories:
T Tap Electrical Connector: amzn.to/3jPMiPn (Amazon)
22-16 Gauge M6 Ring: amzn.to/3zu0STd (Amazon)
Wire Butt Connectors: amzn.to/3Dslyxd (Amazon)
12 Pack 12V Fuse Tap: amzn.to/2WxpPi3 (Amazon)
Red & Black 16 Gauge Wires: amzn.to/3z6dwXh (Amazon)
Circuit Tester: amzn.to/3iZUuNw (Amazon)
Multi Reader: amzn.to/3j96L2x (Amazon)
Join this channel to get access to perks:
/ @jddashcams
What to do in an accident: • WHAT TO DO IN AN ACCID...
What is G Sensor: • WHAT IS G Sensor (Grav...
What is Loop Recording: • WHAT IS LOOP RECORDING...
How to Format: • HOW TO FORMAT A DASH C...
How to Transfer Files: • HOW TO TRANSFER THE DA...
How to Install a Hardwire Kit: • HOW TO INSTALL A HARDW...
How to Install a Back-Up Camera: • HOW TO INSTALL A BACK ...
Business Inquires: [e-mail]
Studio Everyday Equipment
Canon EOS M50 Mark II (Black): amzn.to/3hHF7ez (Amazon)
Camera Tripod: amzn.to/3USPzht (Amazon)
Canon Batteries and Charger: amzn.to/3Gf1fXK (Amazon)
Rode NTG Mic: amzn.to/3tyl2tC (Amazon)
Microphone Arm: amzn.to/3g6exLI (Amazon)
Comica Lavalier: amzn.to/3JtOTer (Amazon)
ATEM Mini Pro: amzn.to/3JuyOpF (Amazon)
ZOOM P4: amzn.to/3PnloiW (Amazon)
Camera Clamp: amzn.to/3PlounP (Amazon)
Field Monitor: amzn.to/3Achf96 (Amazon)
Desk: amzn.to/3USc5Ht (Amazon)
XXL Desk Mat: amzn.to/3g0krOz (Amazon)
Overhead Camera Mount: amzn.to/3X4M49B (Amazon)
Studio Lighting: amzn.to/3qZuEQ8 (Amazon

[@rolandoleybag8577]

Thanks for your tutorial video bro.. it’s very clear step by step & specific way how to do it.. thanks bro & more power God bless 👍👍👍👍

[@redxgear9815]

Just bought a new truck and ordered an AZDOME dashcam and hardwire kit for it. Thank you for making such a detailed installation video! I'm sure I'll have to watch it multiple times during my feeble installation attempt, but I surely appreciate your painstaking illustration!

[@robestey5628]

Great video. +107 thats just crazy. Living in Norther Alberta Canada and we were -53 just last week. Damn weather trying to kill us lol. I have never been at your end of the spectrum.

[@azclaimjumper]

This was especially helpful to me in fining 'Battery" Fuses & "Accessory" Fuses for the Fuse Tap Adapter. I'm planning to hardwire my Garmin 57 Dashcam. I've "Subscribed" & rang the notification bell + I've "Save" it

[@richard.castroc]

Gracias excelente explicación, paso a paso, para dummies , en mi caso. Voy con el Hardwire-kit Azome JYX02 a intentarlo, si no toco con un profesional.

[@mrrevenge1780]

Thank you sir. You helped me a lot.

[@AJCoRePlays]

I watched so many vids about this.., sadly none have explained what strength we add to the fuse kit… the car fuse goes on bottom, but my fuse kit didn’t come with fuse in… do they have to match what the car fuse is??

[@JDdashcams]

Usually you only need a 5 amp fuse however I wouldn't go over a 10 amp fuse.

[@y0214]

What is the screw driver with the light called? The one used to test if its on or off

[@JDdashcams]

Circuit tester

[@mejmaharot9306]

Question: is it okay to hard wire just the accessories and ground? I just don't want my battery to be drained.

[@JDdashcams]

Yes, that is fine.

[@amrahimi]

Can I connect BAT to another ACC, or does it have to be BAT

[@JDdashcams]

You can connect the BAT to an ACC however you will not be able to take advantage of parking mode.

[@Roseneckj]

Why do you have two fuses in the fuse tap? There's a red one already there that came with the kit, and the blue one you removed to add to it. Why can't you just use the red it came with? Or why don't you replace the red with the blue?

[@JDdashcams]

The red fuse is for the dash cam only. The blue fuse is to continue to power the devices that are attached to the fuse.

[@idontthinkso2431]

I get warning "Please connect the step-down line of three lines" when i tried to activated the 24h monitoring mode. Is it the hardwiring kit defects or the camera unit error? BAT+ cable connected to car battery, and ACC cable to empty acc slot. And the camera can not auto on/off when the car on/off.

[@JDdashcams]

Did you verify the empty slot is a switch fuse? When the car turns off the, there is no power going to that fuse. The hardwire needs the ACC connected to a switch fuse to turn on Parking Mode.

[@idontthinkso2431]

@@JDdashcams yes... I even try connecting BAT cable to the ACC slot and it is working fine when the car is on, and going off when car is off. I think the hardwiring kit especially the ACC cable is broken.

[@JDdashcams]

Yes, I would request an exchange.

[@idontthinkso2431]

@@JDdashcams yeah thanks, i will contact the seller

[@azclaimjumper]

@@idontthinkso2431 If NO continuity, then the wire is broken. If you have continuity, then the wire is OK.