How to install a Kicker Key500 1 high level in a Tundra full video

[@Abstract180]

Thanks for this video. I just finished my install. My truck had the stock JBL with subwoofer, so I just bought a connector to tie into the stock subwoofer speaker wire behind the seat, I used that signal to feed the Kicker, I did not run a remote wire, the amp turns on using the input signal. It works great and I didn’t have to mess with any stock wiring at all. Great little smart amp. I copied your abs plastic mount designs for the amp and the fuse holder. Thanks again!! Awesome. 🤙

[@christiandshatto7765]

Perfect!!!! Detail, EVERY step of the way;excellent rta information visual before/after/ along with explaining it's MORE than just a " hey, add a 500 watt sub amp to my car" install 👍🏼👍🏼👍🏼

[@VeerMaharaj]

I had to close my eyes to listen to some of the explanations. God im getting old. Great video and love the education. Keep it up D&F. One of my favorite corners on the internet.

[@tombomb4255]

Very informative. Thank you. Please any chance of the new 22 w/o JBL and using the new stock head? Thanks for all the great videos.

[@wilsondf76]

Love your installation videos, please create more.

[@garywaddle7235]

You guys are awesome! Great work!

[@JSemrad73]

Enjoy your videos. Very informative.

[@michaelbalbo4828]

Any way you can go more into detail on how and when to use the 2 way vs 3 way option for the X over on the excelon DMX706S

[@jeremyschweigart3950]

Thank you for the info, I’ve got the same truck and planning on doing something similar… what box was the sub in?

[@RobHTech]

So, was the amp inputs wired up to the OEM amp speaker level outputs? And, if so, I presume that the amp can handle that high level input OK? Or, is it better to use a LOC?

[@alejandrorascon7694]

So what wires did he connect the rca lines to?

[@ryannutter4669]

Every time I try to tune tuning for the algorithm, the gain match LED and a red LED starts flashing. Cannot get it to go through with the process.

[@lloydmiller4170]

When adding a converter to factory stereo for a amplifier and subwoofer Do u have to turn down the bass on the factory stereo and turn the amp gain ???

[@rg6829]

Does this Amp need a power wire to battery and a ground to bare metal?

[@turkeytalker82]

Sorry for dumb question… will this boost speaker power too? Or is this just for sub power?

[@ronalexander4955]

That was a good video.

[@justforlaughs8988]

Hey boys!! Love your videos!

[@jacquesduplessis6175]

Very nice video 👌 So is the kicker connected to only one speaker level input, ie. Only the left or right speaker as a source?

[@FiveStarCarStereoInc]

Yes

[@jacquesduplessis6175]

@@FiveStarCarStereoInc Thanks, appreciate it👍🏻

[@fw1367]

Hey. To set gain. Engine on or off ?? The big question 🙋‍♀️ 🇸🇪

[@mattmf01]

Did you make a graph for this?

[@G_Weezy]

Do we do the same for the JBL system?

[@imranbangali11]

Will this method work on a tundra with the jbl system?

[@FiveStarCarStereoInc]

Yes

[@otto63dec]

hi guys im looking to buy a stereo with cd player for my truck can you help suggests one

[@josephrabant7432]

Deja vu

[@jonanderson4474]

Right.

[@abelscaliber7969]

🤣who’s voice was that at 22:40

[@gol10dr45]

Funny Side Note: Every Toyota truck - will have a America Flag on it.

[@ernestr1327]

*Texas flag