How To Install A Larson Front Porch Storm Door from Lowe's!

Larson Storm Door: amzn.to/35Lwa9i
*********************************************************************
Thanks for Watching! If you like what you watched... Please give us a thumbs up and Subscribe! Don't forget to click on the Bell to be updated on more uploads!
********************************************************************
Buy Your KalindsLife, JigginJunkie and Crawlspace Craftsman Merch Here:
Http://www.TheCrawlspa...
Check out this link!
linktr.ee/kali...
********************************************************************
KalindsLife
1003 Mulford Ct
PO Box 1077
Knightdale, NC 27545-1077
*********************************************************************
Want to help support our channel and drive to offer better content!? Visit our Patreon page at the link below and become a Patron of ours with a small support donation. This will give us the ability to do what we love and upgrade equipment, buy props and items for new videos and much more! Thanks so much for considering!
/ kalindslife
*********************************************************************
Click on the link below to order some AWESOME KalindsLife and More items!!! We get a small percentage of each sale and put all money made back into the channel so we can continue to make fun and exciting videos for you to watch!
shop.spreadshi...
*********************************************************************
Also don’t forget to Follow us on.....
Email: [e-mail]
Instagram: @KalindsLife
*********************************************************************
Filmed On: iPhone Xs Max
Edited On: iMovie &/or CuteCut App
Thumbnail Image: Thumbnail Maker
Microphone: iPhone Xs Max
*********************************************************************

[@adamsmithyman7973]

Thank you for this as it helped me and just wanted to thank you. I just replaced my old door, like 20 plus years old with a brand new Larson door yesterday. After watching your video it made things very easy and comforting as I began the process. Again thank you.

[@TheCrawlspaceCraftsman]

Your very welcome!!! Glad it helped!!!

[@NewShockerGuy]

Thanks for the video! I bought this from Lowes about two weeks ago and it finally came in the other day. They wanted $140 to install it. Found your video and having never installed a storm door before I was able to do so. Took me about 3 hours but that's ok. I got the same door except mine has the hidden closer. I felt that looked better and there were less parts to trip on if the door was open...etc. Overall, very pleased with the door!

[@TheCrawlspaceCraftsman]

Awesome!!! I’m glad it helped out! It’s suck an easy thing to install only a lot of steps.

[@massmom8919]

@@TheCrawlspaceCraftsman where did you buy the replacement screen door? Larson said $174 which is crazy

[@pttthhh]

How do you like the hidden closer? Is it holding up?

[@NewShockerGuy]

@@pttthhh it's awesome! Love it. Love that it blends right in with the wall because I painted it.

[@73beetle19]

I’m putting my second storm up and I always take longer than most people. I just try to do a good job and I’m not trying to be fast. Good job on installing your own because a lot of people won’t try to attempt it.

[@henrychinaski5223]

Excellent video! I used a Lowe's contractor for the back door (only because I'm old and fat), however, when I bought the front door and set up an arrangement for their contractor he never contacted me. I called twice, waited three weeks and nothing. I've done home maintenance all my life, construction, wall board, plumbing, electrical, etc. so I decided to go get the door and do it myself. I like everything about these Larsen doors...made in America, clear instructions, left or right opening and quality construction. I'll be on this project the first nice day we get here in west Texas.

[@TheCrawlspaceCraftsman]

Thanks so much!!!!

[@henrychinaski5223]

@@TheCrawlspaceCraftsman It was interesting and at the same time challenging to get this door installed. My opening was exactly within the specified tolerances, but when I had the strike plate jamb in place there was nearly a 1/2" gap between the edge of the door and the jamb. I made shims out of 1/2" plywood and they were one layer of lamination too thick. My table saw would barely adjust to rip one layer off of the shims. The door fits perfectly now with the exception of the strike plate. It sticks out too far and I will modify it later. Again, thanks for the video. It was a tremendous help.

[@MarkSmith-rw4ds]

Awesome tutorial sir. I apreciate the time you spent explaining this process.

[@TheCrawlspaceCraftsman]

Thanks Mark!!!

[@jeepkid518]

Bought this exact same door today. Same color too. I also bought it with my dog in mind. I'll be installing it tomorrow. Thank you so much for this video. It gave me the confidence I needed.

[@TheCrawlspaceCraftsman]

Yeah man!!! You can do it! I too was a little like.... “Uhhhhh.....” when I started! If I wasn’t recording and moving camera angles and stuff.... I could have done it in a lot less time! Good luck!!!

[@jeepkid518]

@@TheCrawlspaceCraftsman Well I just completed it 2 hours ago. Because of your video, I barely had to look at the instructions. Like the part about unscrewing that little plate so you can flip the striker around depending on which way your door opens. I also noticed you used an extension drill bit. Apparently, that was important. LOL. Anyway, I got it all done and it looks great! Much thanks!

[@ritaaa8112]

Thank you for this video. I was worried about doing this myself but I'm definitely solid on doing this after watching you do it step by step. Appreciate it!

[@TheCrawlspaceCraftsman]

Were you able to complete the door!!! How’s it look?

[@WookieLove1]

Excellent tip on the hand safety

[@wiseborn2172]

Fantastic video. I was very apprehensive about trying to do this myself until I saw your video. I feel like I can tackle this project now.

[@juanalvarez7099]

Did you?

[@KeepOnKeepinOn]

You installed that screen door like a pro. 👍

[@TheCrawlspaceCraftsman]

Thanks soooo much!!! More Porch makeover coming in a cpl days!!

[@asianguru4984]

Nice video. I'm going to install mine next week. Never installed one before. Thank you and good job on your door.

[@TheCrawlspaceCraftsman]

Glad I could help! I love that door! Especially with the sliding glass window!

[@patmason7276]

Someone needs a truck. Great video think I may go with Pella .

[@TheCrawlspaceCraftsman]

LoL! I would love a truck but it’s not in the cards at th moment!

[@benarddays2865]

Awesome thanks for the content. I’m gonna attempt to install mine tomorrow. Thanks great video

[@TheCrawlspaceCraftsman]

Awesome!!! Glad it helped and thanks for watching!!! Take your time and you’ll do fine!

[@jondavis2206]

I installed one over the weekend, took me a coupe days. The door frame wasn't square exactly, had to take up some threshold and replace that, took some of the door frame down to replace. However after 10 hours. It looks great. Probably could have done in in an hour or 2 if not all the extra problems.

[@KingKong-ju3wy]

Hey Kalind I just wanted to take the time to let you know, that I really appreciate your videos. I went on rehab a week ago, and your ramen noodles series has been my therapy (I know it sounds dumb), but every time I had withdrawals, I opened up a pack of Red Shin Ramen and ate as I watched your videos. Keep it going! - From Denmark.

[@TheCrawlspaceCraftsman]

King Kong! Im really glad you made this comment. It goes both ways. I love making videos... its kind of my escape from reality so to speak. Its humbling knowing that my videos helped someone across the world! Thank you so much for the kind words. Im actually going right now to finish up the second part of the Porch Makeover. Then I have to edit so I hope to post by Saturday! Best of luck our your Rehab and prayers sent your way! -Victor (BTW... Kalind is play on my Daughters names) :)

[@KingKong-ju3wy]

Sounds good!

[@TheCrawlspaceCraftsman]

Just checking in on ya and seeing how things have been going for you!? Hope your doing well!!!

[@edwardmckinney1916]

I liked your video it was very informative a lot better than other ones I’ve seen good job

[@TheCrawlspaceCraftsman]

Thank you for that! Glad it helped!!!

[@airborne2303]

Awesome job and Great editing.

[@TheCrawlspaceCraftsman]

Thanks man!!! I love it!

[@poultonprojects]

Great video!! It scared me when you put on the handle thought it was going to hit the other door handle and not shut! Cant wait for the bench

[@TheCrawlspaceCraftsman]

I felt the same but figured it was meant to be!!! Doing the bench this week!

[@termides]

Damn it I am 80 years old did not read instructions and I have mine all screwed up. Hopefully I can backtrack from the beginning of your video is straightened up my mess

[@TheCrawlspaceCraftsman]

Awe man! I hope your able to get it installed correctly! Hopefully i was able to help!

[@KusHome12]

Nice video thanks for the tutorial. Have you had any issues with closing and opening the screen?

[@TheCrawlspaceCraftsman]

Nope! Works great! Love to drop the screen down and dogs still licking the glass. LoL. Thanks for watching!!!

[@bullet0657]

Thank You.

[@TheCrawlspaceCraftsman]

Your Welcome!! Thanks for watching!!!

[@colombian_mocha2403]

Does this stop police from entering your home without a warrant?

[@TheCrawlspaceCraftsman]

I don’t know the answer to that but it does stop the bugs from coming in! Thanks for watching!

[@delawareteacher1182]

Great video!

[@TheCrawlspaceCraftsman]

Thank you!!! Glad ya liked it!!!

[@PaulSmith-kk4xv]

Where’d you get that hat?

[@TheCrawlspaceCraftsman]

Walmart! And I never found them again! Only twice. In men’s department in the back endcap! I loved that hat! 😄

[@johntamulonis4626]

Great video, thank you for sharing.

[@Bestcustomscreens]

Good job! I enjoyed the video.

[@TheCrawlspaceCraftsman]

Awesome!!! Thank you and Thanks for Watching!!!

[@donhgr]

I did the same door but mine called for a 3/16 hole on the top one and bottom one that I had to buy and the bigger ones were for the other holes. Did it this weekend

[@TheCrawlspaceCraftsman]

It really was an easy door to install once it got going!

[@MaryBerriee]

Thanks you love the video!

[@TheCrawlspaceCraftsman]

Awesome!!! Thanks for watching!!! Glad you liked it!

[@vinodkandukuri3376]

you made it look so easy, i am going to try it out first if not i will call help for installation :-)

[@trinabell2793]

Kool video thank for sharing.

[@TheCrawlspaceCraftsman]

Thanks for watching!

[@gladyschoiniere3696]

Fantastic

[@TheCrawlspaceCraftsman]

Thanks!!!

[@farmer9180]

Probably would have drilled a hole in my hand If you hadn’t given the tip on how not to. Thanks great video.

[@TheCrawlspaceCraftsman]

I’m thankful I didn’t do it myself!!! That woulda been real bad!!!!

[@TheCrawlspaceCraftsman]

And your welcome!!!

[@Jack-rn2im]

nice video, what is the color of your door?

[@TheCrawlspaceCraftsman]

Espresso Brown. Thanks for watching!!

[@mr.tuckers2848]

Great video- Thanks for sharing! I feel confident that I can install one of these now. I noticed that there was a little bit of play once you closed the door in place before you added the hydraulics. Did the hydraulics pull it closer to the door to eliminate that play I wonder? I am thinking it does because the hydraulics pull it in back into place consistently every time. I also like that they have one on top and bottom so that it ensure to close evenly. Nice install and great job!

[@TheCrawlspaceCraftsman]

Thanks RC! You can adjust the part on Jam where the latch engages BACK and that should pull the door tight. It did come with two hydraulics but I only installed the bottom and that was good enough still to this day! Love this door. Thanks for the positive feedback and best of luck with the door! Yoh got this!

[@relicrecoveryspecialist16]

How wide was your door seal board? Is it 1” or smaller?

[@TheCrawlspaceCraftsman]

I don’t know. Id have to measure it!!! Do you need me too?

[@relicrecoveryspecialist16]

@@TheCrawlspaceCraftsman no I’m good, I appreciate the quick response. I got it all together. I had to replace the outside trim that was attached to the inner door frame and they had used deck board at one time and the new Larson door wouldn’t work due to it having a sharp 90° bend, I went to the hardware store and got it cut out and put in and my grandmas happy so I guess I’m happy😆

[@connerschad2894]

Does this door come with the handle?

[@TheCrawlspaceCraftsman]

It’s been a while but if my memory serves me right….. NO. You have ti buy separately.

[@jdvlogs5607]

Nice work I’ve been waiting for a video like this long overdue!!!

[@TheCrawlspaceCraftsman]

Thanks man!!! I hear ya!!!

[@HB-yq8gy]

I like that type stand on wheels? Love to see how you built it? Larson's video is great!

[@TheCrawlspaceCraftsman]

Thanks H B! I think here is a link that might explain it a little bit. kzbin.info/www/bejne/aJjYdJahjZiWr7s

[@dhh488]

My template has six holes, your's only has four. Looking at the lock set, I should only need four. I wonder what gives? Thanks for the video. My door went very quickly too, I just have to figure out the latch holes.Maybe different latches have different hole spacing?

[@jeremymassimino1176]

Hi, I’m looking to install a similar Larson storm door on my existing decorative exterior front door which has sidelights- and I just noticed that the door knob goes past the door frame/trim- giving me no cavity whatsoever to install this storm door- ugh. So I’m assuming I would need add a frame and build out and add additional trim/moulding to give me a cavity to mount the storm door framing onto. I’m assuming there is no other way around it, correct?

[@TheCrawlspaceCraftsman]

Just now seeing this and I’m not entirely sure how to fix your situation. Have you come up with a solution!????

[@adablduya]

after installation: on the latch side, the door is flush with the latch rail at the top, and a 3/8" gap at the bottom, hinge side door alignment is flush. how best to address / correct that gap ? thanks

[@TheCrawlspaceCraftsman]

I would use shims. It’s highly unlikely your square all the way around! Hope that helps!

[@MrWhitelightning73]

Excellent video....looks great ❤️

[@TheCrawlspaceCraftsman]

Thanks Charles!!! We love having a storm door!! Thanks for watching!

[@styner3]

Thanks for the video, I'm buying the same door and was wondering if it would fit in my Kia Soul and found your video using a Soul :)

[@TheCrawlspaceCraftsman]

Awesome!!! Glad it helped ya out!!

[@victormalgieri7733]

Wait is that a wood bit ?

[@TheCrawlspaceCraftsman]

It’s aluminum so any bit will work honestly. Paddle, Forsner, Hole Bit.

[@victormalgieri7733]

Thanks you

[@pttthhh]

Is it screwed into the door jamb? Are they sized to fit standard exterior jammbs?

[@TheCrawlspaceCraftsman]

Yes. They’re screwed into the jam. And you need to make sure you get the correct size door.

[@edkhoshaba170]

Good job

[@TheCrawlspaceCraftsman]

Thank you!!!

[@YTeradicant]

Any issues with the door after 2 years?

[@TheCrawlspaceCraftsman]

Not at all!!! Works wonderful and love the sliding window!!! Used it today with the beautiful weather!

[@pucketts57]

Why so fast when youre installing the closers ? Do you install the bottom one on the sweep part of the door ?

[@TheCrawlspaceCraftsman]

I only installed the bottom one and skipped the top one as it really wasn't necessary.

[@harrycock3705]

You totally installed this the hard way. Install the hinge portion first, then mount the screen and secure it with a self tapping screw.

[@TheCrawlspaceCraftsman]

Well now ya say something! LoL. Thanks for the tip!

[@Last_one_before_I_go]

Good info. well done, thanks.

[@TheCrawlspaceCraftsman]

You're welcome! Glad it helped!

[@sherryberry2394]

So I am at that moment where I need to lift up the door and place it on the installation screw. Any tips for managing the door by yourself? Did you rest it on top of a board or something to have it level for putting onto the installation screw?

[@TheCrawlspaceCraftsman]

I believe you should have marked two spots where the screws will go then start them and back them out about 1/4” so you can hang the door. Then tighten all the way. Then sink the rest of the screws. It’s been a while so I forgot a little.

[@sherryberry2394]

@@TheCrawlspaceCraftsman I've done that already. Marked both spots and already screwed in first/top installation screw. I'm just trying to gauge how hard it is to wrangle the door by myself. Once you screw in the installation screw does the door hang fairly still to proceed from there, or is it going to wriggle around?

[@TheCrawlspaceCraftsman]

Nope. Once you hang it... you should tighten them up and the door will be secure and not wiggle around

[@Emin978]

Thank you for a video .... Question - I would need to do a build out extension box to hang the storm door so the the door handles don't hit each other. Does anybody know how much of a distance should be between door lock/handle and storm door handle ?

[@TheTomvaughan]

Is that color siding English Wedgwood with Desert Sand Trim???

[@TheCrawlspaceCraftsman]

Honestly I don’t know the exact color but I looked up EW and I would say yes and yes!!! Thanks for watching!!!

[@TheTomvaughan]

@@TheCrawlspaceCraftsman I just had my siding done in the same color. With soffit fascia and gutters in desert sand. Although I went with a special order door and ordered sandstone. Probably should have gone with Brown like yours. It’s same exact door except has the hidden closer system. Darn. 🤷‍♂️

[@SATXrattlesnake]

Great video. Did you have to purchase the door handles separately? how about the pneumatic/hydraulic hinge?

[@TheCrawlspaceCraftsman]

Handles were a separate kit and hinges came with the door!

[@mommaoinnh2674]

I just installed the same door by myself today, but I haven’t done the handle yet. Question- the latch side piece is 1.5” wide, but my trim is 1”. I can see air on the outer side, in the hole where the latch will catch. In your video, you show it completed with the latch plate on, so I can’t see if you had the same problem. How can this be correct?

[@TheCrawlspaceCraftsman]

I don't really know! Without really seeing it... its so hard to give any advise. I'm sorry its not lining up for you. Hope to hear back with your resolution!

[@fja4916]

Do you have to keep the glass in during the install? Just wondering if it matters, cause I’d be a little nervous about breaking it. Thanks in advance. Great video. 👍

[@TheCrawlspaceCraftsman]

It’s rrally not necessary to remove it. Once you get the hanging screws set. The door slides on those and allows you to work. It’s a little intimidating but honestly one of those projects you just go at it!!! Good luck and thanks for watching!!

[@fja4916]

KalindsLife Thanks, I appreciate your reply. I used to install to old school aluminum ones, with an Uncle, when I was a kid. I just wasn’t sure if there was something I was missing, like it would knock the door out of square, or something if I removed the glass.

[@garymoore3446]

Nice

[@TheCrawlspaceCraftsman]

Thanks!!!

[@lizchilders4154]

Was it tricky installing the top door closure with the screen section up in that area?

[@TheCrawlspaceCraftsman]

Nope not at all!! Once the actual door was hung it seemed to all fall into place for me. It only took me so long due to recording. Other than that.... I would have had this up in no time!!! Thanks for watching !!!

[@whaile2]

Did your bottom rail come pre-assembled? Mine did not and I'm having trouble sliding the bottom rail onto the bottom of door.

[@TheCrawlspaceCraftsman]

I believe that is the last part to go on. That way you can adjust for any unsquareness of the door.

[@TheCrawlspaceCraftsman]

Once you get the frame and door on and opening and closing sufficiently.... slide that on and adjust it so the sweep cuts off any airspace.... close the door and screw it on from the inside. It’s been a while Since I installed so hopefully that helps And made some sense!! LoL

[@whaile2]

@@TheCrawlspaceCraftsman Thanks for the reply. Yes, it all makes sense and I was able to get it all installed... it looks great.

[@hugabee2580]

I made the hole on the wrong side side of door. How can I fix? Do they sell plug? Thanks

[@TheCrawlspaceCraftsman]

You could use some wood filler or even use 1/4 drill bit, make a hole and wood clue in a 1/4 plug.... then top with a little wood filler and repaint.

[@73beetle19]

I don’t know what size hole but the hardware stores , Lowes and Home Depot sales plastic plugs . I bought them to go over screw holes. I see it’s been around a year but they do have different size plugs. Everybody makes mistakes and I have done the same.

[@hugabee2580]

@@73beetle19 I went to Menards they have aluminum guter Holder, same color, same Link cover everything, very thin. sold the house since then, thanks

[@73beetle19]

@@hugabee2580 Thanks for the information because you never know I might need to do the same.

[@soccervideos9267]

can i install the door closer latch more than 1/4" away from the back of the hinge? I have a weird trim so it would be more lie 1/2" away.

[@TheCrawlspaceCraftsman]

I don’t want to give any false info so I’m not to sure honestly. I would refer to the manufacturer or go to Lowe’s to measure their display to see if it would work. Hope that helps and sorry I can’t provide all the info you were looking for.

[@lawrencetalley7962]

How do you put it back online?

[@TheCrawlspaceCraftsman]

Not sure what you mean exactly.

[@seanc6468]

The heck dude? I got the same door and porter cable impact.. doing it in a few weeks..

[@TheCrawlspaceCraftsman]

LoL. THE HECK!!? It’s even easier then this video appears!

[@andersonmirandamartinez2281]

Did you have to cut it.?

[@TheCrawlspaceCraftsman]

Nope... no cutting!

[@Bangarang07]

Did you have to use caulking for anything?

[@TheCrawlspaceCraftsman]

No caulk used on this project. I don’t think a little bead would hurt between the frame rails but i don’t think it’s entirely necessary either. Thanks for watching!

[@fredsepanek]

Not a big deal but you installed the handles upside down. Check all the pictures of how the curved handle should look.

[@esmeraldacano2292]

Awesome ! can you come install my new storm doors I'm about to buy .God Bless you.

[@TheCrawlspaceCraftsman]

Hahahaha!!! You buying my plane ticket!!! 🤣

[@jerryjaskula1613]

Larson storm door side locking strips install

[@TheCrawlspaceCraftsman]

Not really sure what you mean. Thanks for watching though!

[@davew3880]

I would think that if you was to drill your inside holes first for the handle it would be safer

[@TheCrawlspaceCraftsman]

One hundred percent! I was lucky I didn’t drill through my hand!

[@alexanderanguiano1378]

He explains stuff okay, but the video doesn’t really work for you if you don’t have a frame that is plumb.

[@wsb3o1]

what door model is this?

[@TheCrawlspaceCraftsman]

Hey Walter! It’s the Larson Tradewinds full view aluminum storm door! Super easy to install! Thanks for watching!!

[@poultonprojects]

You said hung!!!

[@poultonprojects]

Did you have this approved by the hoa??

[@TheCrawlspaceCraftsman]

Hahahaha

[@karenpatterson8574]

Friend of ours installed door for us. The door leaks water at the top every time it rains. Suggestions? I keep telling this person some things missing or not installed right. 😡🤬

[@TheCrawlspaceCraftsman]

I’m not too sure honestly!!! Without looking at it. Hope you get it worked out!

[@younggunz4081]

Andersen storm doors a simpler installation

[@TheCrawlspaceCraftsman]

Im sure there are easier but this one was pretty easy for newbie like me! Thanks for watching!

[@joekind1]

You may have to get a new screwdriver bit, (bent) yours was wabbling causing the screw to fall off on the ground.

[@TheCrawlspaceCraftsman]

I think your absolutely right!!! Thanks for watching!

[@fluffymittens24]

Paddle bit on aluminum??? Would never, ever. Hole saw bit.

[@TheCrawlspaceCraftsman]

I agree with Chris!!! It woulda been much easier and safe! Thanks for commenting!!!

[@jetsenmarin1117]

Would’ve been better if you didn’t have the stupid music on And spoke more to give a a better understanding on how to install it

[@TheCrawlspaceCraftsman]

You needed more direction? Shoulda hired someone maybe. Sorry it didn’t help ya!

[@michaelthompson7570]

Can the background (nolse) music,,,could it be more annoying…..

[@TheCrawlspaceCraftsman]

It probably could be! Thanks for watching! 😉

[@plumhunter9158]

not much explanation while it was being done ... Might have been more useful than that fusion metal or whatever that music was!!!!

[@TheCrawlspaceCraftsman]

Sorry you didn’t like the video!

[@tracylyon70]

Hi I bet you had some really good information… But I was stressing on how to install and fix the handle… And your music just got too much for me so I’ve gone looking for another video.

[@TheCrawlspaceCraftsman]

Ok! I’m sure you’ll find another video!!!

[@Ripskiis]

It's not very "how to" its more like just watch me do it 😅

[@TheCrawlspaceCraftsman]

I’m sure there are some helpful hints along the way!

[@biggchi828]

epic fail, begin with how to correctly measure a door space, because people don’t know how to buy the correct size (due to spacing, tops, bottoms, hinges closers etc....

[@TheCrawlspaceCraftsman]

Huh? Thanks for watching.... I guess?

[@lakid9749]

Huh, lame video - if you havent ever put on a door or arent a guy - watch another video - this one isnt step by step

[@TheCrawlspaceCraftsman]

🤣🤣🤣🤣🤣 🤨

[@darinjohnson4275]

you sooo lucked out. the gap on the latch side must have been correct. my old door jamb is not square. I get to shim the hinge rail. Anyone know of a video that shows how to shim aLARSEN Storm door?

[@TheCrawlspaceCraftsman]

New house construction made it easier I’m sure. Once everything settles…. It’s a new ball game! Hope ya get it done! Thanks for watching!