How to Install a Loadhandler! | Unboxing, Overview, Install | Truck Build ep.03

[@nryan9595]

Great video! SOLUTIONS TO PROBLEMS YOU MIGHT HAVE WITH THIS PRODUCT: I love mine for fall leaf cleanups. I have a spray in bed liner so I put a 1/4 in piece of plywood down in my bed for smooth sliding. Works well. Also I had problems with the load getting stuck behind the wheel wells and causing the unloader to pull out from underneath the load. My solution to that is having 2 cinder blocks on top on the unloader BEFORE put leaves/debris in. Then once it’s all filled up the blocks act as a wall to kind of push the load out of my bed. Works great and hopes that helps someone.

[@wyattslawnservice7212]

Interesting ideas! I'm pinning it for others to see!👊

[@RedRockMaintenance]

That would be so handy. Good job on the install Wyatt

[@wyattslawnservice7212]

Thanks bud!😎👊

[@ctswat1989]

I got my money’s worth with that thing. Used it to empty over 2500 lbs of stone haha. It bent a little but still works. Well worth the money

[@wyattslawnservice7212]

Hahahaha

[@andyslawncareandoutdooradv]

Looks like a sweet tool Wyatt! If I had a truck I'd defiently get one. Good luck this season! As far as mower demos, could you look into a Cub Cadet ProX600 stand on and a Toro Multuforce? I'd like to see how you like those machines!

[@wyattslawnservice7212]

You'll have a truck before you know it Andy! And I have an extended demo of the cub stander coming!😎👊

[@nuts4shakabra613]

That’s cool. I remember you having one on your white truck. 🤙

[@wyattslawnservice7212]

Yessir! Liked it so much I wanted another haha!👊

[@garyoverman4393]

Good job ! I’m ready to go install mine. Instructions provided aren’t nearly as helpful as your video …. So thanks for sharing your experience. I’m 63 and need all the help I can get 😅

[@scotts3460]

Great video! I purchased this to put on my 2023 Sierra, but the darn tailgate is too wide and flared for the brackets to fit. I had all these great plans to use it. Dang!

[@myke_bota7590]

Great product. I've purchased mine a few years ago and it's worth every penny! Huge time saver. God Bless!

[@ricepadi29]

I have had one for 5 years. It works really good especially for the money.

[@clterry07]

had 2 of them ... a little over priced for what it is .... word of warning you better have some strong arms ... thats why i built my dump trailer haha ..

[@ChevySilver]

It didn’t work for me, I had 3 yards of wet mulch in my 8ft bed of my Duramax, I was bending the handle.

[@anthonyrowberry3154]

Nice are you still on lockdown if so stay stay 👍

[@wyattslawnservice7212]

Yessir unfortunately. But hopefully Business will start to pick up. How about for you?

[@anthonyrowberry3154]

@@wyattslawnservice7212 yes unfortunately been in lockdown for 3 weeks now and maybe a never 3weeks hope to get back to it soon

[@mnight207]

For the handle, just slip a piece of pvc over it....DONE

[@JPLawnsMore]

I have gotten a lot of mulch unloaded in seconds with mine!

[@wyattslawnservice7212]

Nice! They aren't shabby for the price!

[@JPLawnsMore]

Wyatt's lawn service definitely a must have especially if you can get it on a members price deal! 35$

[@dennisalarid9430]

works great, thanks for the help

[@erichwoodall2897]

Great video, thank you

[@carlosrojas8542]

Work really good for yard debris. The only thing i don’t like it damage the paint on the tailgate on the hook area but it works, good video

[@wyattslawnservice7212]

Just put the rubber strip on the part where the hook goes. This way when it rubs, it'll scratch the rubber mat and not the paint. Like what I did for where the plastic mounts go on the bed 👌

[@tom.p1986]

great video. those bed liners sure make things slide out a lot easier. I just put a big tarp in the back of mine and pull the tarp out. it does get hard to pull some times

[@wyattslawnservice7212]

Tarp is the way to do it! Just gotta make sure that the tarp is put on top of the loadhandler 👊😎

[@treemonkey_ma1718]

Correct me if I'm wrong but I thing you put the brackets on backwards! You'll notice 1 with an extra buckle! On the driver's side, which is for your extra strap to the bumper. The tensioner buckles should be on the inside of the tailgate! Also, I put 1 piece of plywood on each side of the bed on the inside. At an angle, it keeps all the material towards the tarp when its rolled out and not into the crevasses of sides and the wheel wells which will hold it back. Made a huge difference when unloading smaller debris. Definitely worth the investment 👌

[@wyattslawnservice7212]

Good idea with the plywood. And like I showed in the video, I showed the proper way to install it on a regular truck tailgate, as well as how to install it on one with a slight spoiler like mine. If you turn it around it'll fit the spoiler better. It still works fine though. It's all explained in the video haha

[@treemonkey_ma1718]

@@wyattslawnservice7212 Must have missed that part! I have the same style of tailgate and works just fine

[@westprolawns1953]

Nice video bro sounds like I need to get one of those thanks

[@wyattslawnservice7212]

Thanks bud 😁 they are great for the price. Just gotta lay a tarp on top to make sure that everything comes out cleanly 👌

[@revfred2008]

Can we see you use it?

[@kenlynch6332]

Good product...very good explanation.

[@wyattslawnservice7212]

Thanks Mr. Lynch! Appreciate it as always sir 😁👊

[@JsCrazyCutzLLC]

Great job on the video bud 😉👍

[@wyattslawnservice7212]

Thanks guys!😎✌️

[@KenMrKLC]

I have been using the heavy duty loadhandler version... basically same thing just stronger materials. They do work well and well worth buying. It will scratch your tailgate in time however... especially on that nice shiney truck... It will create wear spots at the bottom of the mounts.

[@KenMrKLC]

I see you addressed it in the video, Mine still made marks on the bottom lower than where you put those pads

[@wyattslawnservice7212]

Does the heavy duty version have more metal parts? I saw the price difference and it found that it wasn't completely necessary for what I use it for. And I'm working on that wear spot problem haha..

[@wyattslawnservice7212]

Mine made marks on the whole area on my Titans tailgate (because it made complete contact). On this one it only touches one small part so I should be good after the 3m rubber sheets. I just need to figure something out with the plastic buckle's

[@KenMrKLC]

@@wyattslawnservice7212 Yes, all the plastic that is on yours is metal on the HD version. It also has bearings which help it unload easier and handle more weight. I have a couple videos on it. I had it on a truck and on my trailer to unload from the side

[@GrassNectar]

Thanks, man. Been thinking about getting this for my truck

[@wyattslawnservice7212]

No problem! They are great for the price tbh. I also recommend that when you use it, you lay a tarp on top of the load handler that's laid out in the bed. This way it'll pull out absolutely everything :)

[@GrassNectar]

@@wyattslawnservice7212 Thanks for the tip!

[@upscalelawncaremonroe408]

Wow! I've never seen that.

[@wyattslawnservice7212]

It's pretty helpful for the money :)🙌

[@jimb6017]

Good video. I use one and love it. I made some adjustments to eliminate the wheel wells so it unloads clean. Wish I could figure out how to put up picks of it.

[@wyattslawnservice7212]

I'd love to see that! Do you have Instagram? If so follow me @wyattslawnservice and shoot me a pic 😎✌️

[@guilestan2743]

What were the adjustments yo eliminate the wheel wells?

[@moneymakingmikeg.9555]

Great video Brocaroni & Cheese!! Step bye step & you cover a lot of potential problems that could arise during install. It's NOT your fault bye any means but the buckle that lines up on your F150 logo would drive me nuts!! And... I remember years ago they didn't come with the strap that hooks to bottom of bumper & yeas when you're young & dumb and using that to crank out tons of stone that tailgate would rise right up!! Hoping all is well Broffalo Chicken Quesada!! Dirty Jersey out!!

[@BermudaBoss]

Have you ever tried to unload sand with one?

[@wyattslawnservice7212]

I haven't. But I've done pea gravel and dirt. I'd highly recommend putting a tarp on top of it going up the sides. Then it should pull the sand out no problem 😁👍

[@BermudaBoss]

@@wyattslawnservice7212 thanks Wyatt

[@why_mom8208]

Dangit I forgot to hit the notify button thats why I wasnt notified!!!!

[@wyattslawnservice7212]

Haha no worries! Appreciate it bud!!😎👊

[@why_mom8208]

@@wyattslawnservice7212 Don't worry I hit it. I'll be notified now :)

[@Towman1151]

You should get a dump insert

[@wyattslawnservice7212]

That would not be the smartest use of my money as this is excellent for grass clippings. And I already have a 7x12 dump trailer now

[@lets-run-it816]

Looks good

[@wyattslawnservice7212]

Thanks bud 👍💪

[@c50ge]

I wonder if you could mount one of these on the front to act as a cover for your load???

[@owenslawnmaintenance7593]

Hey

[@wyattslawnservice7212]

✌️

[@eddieweir1644]

Look good wyatt I have one and I like it

[@eddieweir1644]

What helps is putting sheet of plywood for like side walls in side the bed and it's helps real good

[@wyattslawnservice7212]

I'll look into that! If I lay a tarp on top, it works pretty well as is for me 😎

[@eddieweir1644]

Good morning Wyatt if I could remember when I dump I'll send you some pictures and if I could maybe a video

[@brandonbenner2243]

Spoiler 💀

[@wyattslawnservice7212]

They are a pain to work around! But they look nice 🤣👍