How To Install A Mcculloch 2 Peice Rod 10-10 Pm850 Pm700

  Рет қаралды 989

Bellhopper mcculloch chainsaws

Bellhopper mcculloch chainsaws

Күн бұрын

Пікірлер: 22
@BillsGarageWorks
@BillsGarageWorks Жыл бұрын
I’d watch either way hopper. I can’t tell you how many times you’ve helped me fix a saw. You are a wealth of knowledge!
@chrisbrusasco6935
@chrisbrusasco6935 Жыл бұрын
I like the new direction you’re taking with your videos hopper. Very educational the details on how you are doing. Things is very helpful. Keep up the good work. Love what you do.
@famasmaster2000
@famasmaster2000 Жыл бұрын
Awesome video Mr Hopper. Always fun spending time with you 👍
@PatrickFlagg-ys1lx
@PatrickFlagg-ys1lx Жыл бұрын
Good stuff hopper. That's the stuff you dont get to see that it takes to make these builds come to life.
@nicksanders9140
@nicksanders9140 Жыл бұрын
I can not believe the before and after with that piston. That's a craftsman at work.
@chrisbrusasco6935
@chrisbrusasco6935 Жыл бұрын
Has no idea you could grind a piston down like that. Very cool video!
@vintagesawyer6246
@vintagesawyer6246 Жыл бұрын
I once used my belt sander to taper the top of a "too tall" piston on a 268 clone I built. The saw still runs great .
@wimkool3808
@wimkool3808 Жыл бұрын
Hello there!
@johnhudson6469
@johnhudson6469 Жыл бұрын
I like the length but I would watch a longer one! Good either way!
@justinweaver8107
@justinweaver8107 Жыл бұрын
Very nice vid sir
@kurtsteele5587
@kurtsteele5587 Жыл бұрын
How's the Hopper family
@bellhoppersaws
@bellhoppersaws Жыл бұрын
We doing pretty good buddy how are yall
@kurtsteele5587
@kurtsteele5587 Жыл бұрын
@@bellhoppersaws good here
@sunbear1973
@sunbear1973 Жыл бұрын
I do like it. Since this helps a lot on a future PM 850 that I have in the garage. Thank you
@DavidArentz
@DavidArentz Жыл бұрын
Good afternoon Hopper. Love seeing the how I done did it videos. Does shortening the piston on one side increase the wear on the piston skirt due to the difference in weight/balance?
@bellhoppersaws
@bellhoppersaws Жыл бұрын
I havent seen any evidence of wear because of it and some pistons are that way from the factree buddy
@DavidArentz
@DavidArentz Жыл бұрын
@@bellhoppersaws Thanks for the reply mate. This is great way to increase intake duration. The little 52cc dolmars I play with, the impulse is just below the floor of the intake, so I hadn't been able to increase the duration any. I might give this a go 👍
@kenneth6731
@kenneth6731 Жыл бұрын
Quick question please, I have a 10 10 on the bench that doesn't want to start. I am starting out with the low/high jets 1 1/2 turns out, but what about the idle screw? Is there a starting point for how many turns out from closed? Thank you!
@chrisbrusasco6935
@chrisbrusasco6935 Жыл бұрын
Typo Had*
@Finom1
@Finom1 Жыл бұрын
Enjoy It Be glad in the Lord and rejoice, you righteous [who actively seek right standing with Him]; shout for joy, all you upright in heart. Psalm 32:11 The more you enjoy the work you do, the more successful you’ll become at doing it. When you enjoy your work, you put your own special value into it. That causes it to yield even more value in return. There’s no need to wait for your fantasy job to come along in order to enjoy the work you do. Whatever you’re doing, the main ingredient in making it enjoyable is your attitude. There’s a widely held assumption that work is not fun, that it is some kind of punishment. That assumption is not shared by the most successful people in this world. Those who can find a way to make any kind of work enjoyable are the ones who accomplish great and astounding things. What’s the difference between working and enjoying yourself? There doesn’t have to be a difference. Look at your work, whatever it is, as an opportunity for enjoyment. See how much more effective and satisfied you become. Father in heaven, today we are learning to find joy in whatever we are doing rather than waiting to do only what we enjoy. Whatever tasks are on our lists today we ask for Your help to choose an attitude of joy. Whether filling out yet another report, changing another diaper or whatever we do, fill our hearts with joy as we work. In Jesus name, AMEN! Find joy in everything you choose to do
@whildcatwhisey5249
@whildcatwhisey5249 Жыл бұрын
Don’t post it on the McCulloch page people would get so buthurt over it I used to do these mods on 10-10 macs and people got upset and guess what all them saws I done them mods too still run awesome
@Finom1
@Finom1 Жыл бұрын
Quote from New Life newsletter: The Bigger They Are For I the Lord your God keep hold of your right hand; [I am the Lord], who says to you, ‘Do not fear, I will help you.’ Isaiah 41:13 If you’re constantly worried about little, trivial problems and annoyances, you’ll end up getting little, trivial results. Yet when you tackle a big, major problem your energy is directed toward producing significant positive results. Many people never get ahead simply because their problems are not big enough to draw them forward. Too many lives are wasted fighting little, petty, but comfortable battles over and over again. If you’re going to make a mark on this world you’ll need to rise above the petty concerns which keep others from realizing their true potential. Put yourself on the line. Get yourself some challenges with substance, and they’ll propel you toward great achievements. Welcome those big, sticky, complicated problems. In them are your most powerful opportunities. Father in heaven, it’s so easy to get bogged down in the minutia and small problems that pop up. We end up spending all of our time putting out small fires, rather than truly making progress. Help us to see beyond the petty things and focus on the big things that matter. Just like David didn’t waste his time arguing with his brothers and instead focused on Goliath, help us to focus on the problems that matter. In Jesus name, AMEN! There are no great people, only great challenges ordinary people rise up to meet.
Which way do pistons fly out at 10000 revs?
20:41
Garage 54
Рет қаралды 1,9 МЛН
Old Mac 10 10 Just Wont Run
39:35
Bellhopper mcculloch chainsaws
Рет қаралды 3,1 М.
JISOO - ‘꽃(FLOWER)’ M/V
3:05
BLACKPINK
Рет қаралды 137 МЛН
Непосредственно Каха: сумка
0:53
К-Media
Рет қаралды 12 МЛН
КОНЦЕРТЫ:  2 сезон | 1 выпуск | Камызяки
46:36
ТНТ Смотри еще!
Рет қаралды 3,7 МЛН
McCulloch Super Pro 70 engine assembly!!
25:31
Tinman's saws
Рет қаралды 4,8 М.
Mcculloch PM700 Porting part 1
20:07
Bellhopper mcculloch chainsaws
Рет қаралды 3 М.
Somethings to look for when working with cheap AM cylinders.
18:38
Sunbear Vierra
Рет қаралды 3,2 М.
How To Repair A Bad Piston
37:06
Bellhopper mcculloch chainsaws
Рет қаралды 13 М.
Taking our 4.0L XJ Engine to the machine shop
11:11
Hagerty
Рет қаралды 92 М.
Christmas Success: A Guide to Quality Checking your Barrels
24:09
Speedy Gonzalez
Рет қаралды 10 М.
Жекпе-жек. Төртінші тур | Екінші топ | Jaidarman 2022
1:6:41
I WANT SUMO (Shorts Version)
0:30
FilmPop
Рет қаралды 50 МЛН
Ангел против Демона кто победит 😱
0:49