How to install a Programmable Integrated Tail Light on a 2016+ Kawasaki ZX10R by TST Industries

Our TST Industries exclusive LED Integrated and Tail Light for the 2016+ Kawasaki ZX-10R upgrades your bike with a unique lens design, programmable light modes, and an overall clean look that will transform your machine.
Get this Tail Light here: goo.gl/7jqGtA
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
The Kawasaki ZX10R is a gorgeous bike worthy of equally appealing aftermarket accessories. That's exactly why our design and engineering team strived to create an LED Integrated Programmable Tail Light that's not only full of features, but also looks like it should have been there as your bike rolled off the factory floor...and we think they nailed it. The thoughtful lens design pulls in elements and body lines from the Kawasaki tail section, making this tail light not only stand out due to the attention to design detail, but also improve the overall look of the ZX-10R tail. The programmable light modes offer you 9 selectable states, enabling you to choose the mode that fits your style perfectly. Don't worry about the installation process either, because we have you covered with a step-by-step video! Watch Bart walk you through the entire installation, a process made easier by the plug and play connectors on the tail light. That means you don't have to cut, splice, or solder any wires during the process.

[@bakwheeltangosZ1043]

killer video! I'm going to order this light in smoke. Thanks!

[@bakwheeltangosZ1043]

ordered it up. shipped out the same day and a cyber Monday deal! Nice job TST!

[@jonathanatkinson2515]

I’m going to attempt to install mine tomorrow. Thank you so much for this video

[@TSTindustries]

We can't wait to hear of your success with the installation! Just take your time, follow the steps, and don't overthink it. If you have any issues or concerns, reach out to our Support team and they will be able to help out. [e-mail] -TST

[@MrMack12345]

Showed us how to take the light off but we needed to see the wiring! Showed us everything else but the wiring of the new light

[@TSTindustries]

There is no wiring. As outlined in the intro, the taillight is equipped with same connectors as oem equipment. You just snap the connectors in the harness and you're good to go.

[@hardrichus]

Very helpful video. I have ordered my integrated tail light and will soon install it by myself. Thanks to this video.

[@bradjean4486]

How about slap a sbk race tail and foam race seat and call it a day 🤔

[@kx501]

What a great product and video to do the install well done TST, sold!

[@TSTindustries]

Thank you. I am glad you enjoyed it.

[@onelifeliveit999]

i bought this and it is absolutely more then perfect oem finish and perfect fit 😍😍 love it and the viedo help a lot too 🙂 well done brother ☆☆☆☆☆

[@TSTindustries]

Great to hear! I am so glad that our parts have affected you in such a big positive way.

[@onelifeliveit999]

@@TSTindustries yes the parts are amazing 🙂🙂 keep doing the good work guys 👍👍

[@guarf]

Thanks, excelent video.

[@GR8WHITEC5]

Great tutorial. What is the product number for a 2017 ZX10RR?

[@kristencarden1672]

Hi how do I got about buying one in to the UK 🇬🇧

[@moto__shark]

I received my smoked out tail light today.

[@TSTindustries]

Great to hear!

[@FlyBugSick]

nice

[@timothy9596]

I just purchased the led integrated tail light, fender eliminator, relay, and license plate light from you for the 2021 ZX-10R which should be here sometime this week. When is that video coming out?

[@TSTindustries]

The fender eliminator is the same but we should have the tail light video ready within the next week or so.

[@CobraV1MoDz]

Would it cause any issues if you did not do the flasher relay. Would excessive flashing be the only consequence ?

[@TSTindustries]

Fast flashing would be one consequence. An additional symptom if you chose the sequential signal program would be the sequence not finishing and only lighting up a smaller portion of the signaling LEDs. No electrical harm would come to the light or bike.

[@Qomicbook]

i’m doing a 2016 tail swap on my gen 4 2012 zx10r, will my turn signal wires work with this light?

[@TSTindustries]

Our tail light has dual signal connectors. One set is for the newest connectors on the Kawi harness, and yhe other is for the older ones. Your pre-2016 harness will have the older style connector for the signals. The main tail light connector will be another story. The 2011-2015 model had a different maint tail light connector than the newest ones. If you have a crimper and know how to do that kind of work we can outfit you with the appropriate connector to make the connection plug and play

[@bakwheeltangosZ1043]

Fast shipping great looking product. Went right on and I'm not even mechanically inclined. No issues looks awesome. Great price 10 out of 10. This video helped greatly thank you so much for taking the time to do this. In my opinion you set the bar with this production. I actually started laughing when you walked in from the side. I don't know who the dick heads are they gave you a thumbs down, they need to grow up!

[@2wheelsonly614]

Did you use resistors or tet relay?

[@d-nic3515]

Is the 2021 Zx10r tail exactly like this??

[@TSTindustries]

Oddly enough, we just filmed the install video for the '21 model yesterday. Essentially, it's very similar with a few differences in wire routing and disassembly of the OEM tail section. Stay tuned for the video if you feel uneasy.

[@d-nic3515]

@@TSTindustries ok cool I got my tail light and fender eliminator kit just wait for my relay.

[@faint442008]

I installed this today but my foot brake doesn't seem to activate the light. Not sure why. I don't think i unplugged anything but maybe i did

[@TSTindustries]

Please direct this question to our customer service dept on our website. This is typically caused by improper adjustment of the foot brake sense switch.

[@faint442008]

@@TSTindustries I figured it out. I took it to a guy locally and found out that it was never even plugged in for some reason

[@shubinzhang2126]

how can I purchase it in Australia

[@TSTindustries]

We send our parts to Australia via DHL if you purchase from our website. We are in talks with a distributor there but there is still a lot of groundwork before that becomes operational.

[@emmanmaranga970]

is the zx6r's tail light the same as the zx10?

[@TSTindustries]

From our company they are cross compatible because we have a piggyback bracket that can be used for ZX6R or removed for ZX10R.

[@Marcos-eu2jo]

Can you guys do carbon fiber for the zx10r

[@TSTindustries]

We can, we just dont at the moment

[@Marcos-eu2jo]

Thanks for your reply

[@cessanchez28]

I installed mine today and the bike doesn’t turn on? Help please!

[@TSTindustries]

Did you perhaps leave your tip sensor disconnected? That is the first thing that comes to mind because no other component responsible for the bike running is located anywhere near the areas disturbed for this installation.

[@aka8607]

Fit for z1000 2019 ?

[@TSTindustries]

Although the light looks like the Z1000 model from the outside we designed ours in a way that does not fit that model. This was done because the Z1000 was a very unpopular model here, and adapting our tail light to that bike really shortchanged the whole design that was meant more for the other bikes it fits.

[@rahibkhan4931]

Kawasaki ninja zx 25r tail light was same????😅😅😅🙏🙏🙏

[@TSTindustries]

From the outside it looks the same but we have no way to verify this as the 25R is not available in our market.

[@dreamtotravleeveryisland9771]

Really well spoken and elaborated & explained A1 products quality is phenomenal. I’ve bought previous parts for my zx6r 2017 and will continue to buy more parts for my brand-new 2020 ZX10r once she arrives. Guys, if you’re thinking about any products, go, TST industries they are reliable though out shipment and will answer you though out your order via email I haven’t ever called them myself they’re trusted 100 percent for me Get on it !

[@TSTindustries]

Thank you very much. We appreciate the love and support. We work very hard to achieve this type of effect on our clients and when we are notified that the effort paid off, it is very satisfying. Cheers!