How to install a ROLLER OPENER Auto Openers Garage Door Opener Installation Video

[@rod_at_adelaide5766]

Great instructive video, thank you. I would probably leave the old locking mechanism in place so you could still lock lock the door if for some reason you have to use it in manual mode.

[@johndrew4689]

Great explanation. Fixed my daughter's remote. No more manual opening in the rain, or wondering who's behind a tree. Thankyou 👍

[@grouchdouglas5507]

What was the point of putting a screw in each side of the door @ 1:40?

[@user-og7il2wf3w]

I have same question about why install the screws? What's the reason?

[@SelrotiByapari]

@@user-og7il2wf3w

[@MickiDracing]

For security. If you don’t pin the door at the closed position then technically, even though the door is locked, you can still lift the roller door up and balloon the roller door off the drum and potentially someone could slide underneath the door if there is enough space. Pinning the sheet prevents this.

[@stevieteeesadvfnq7381]

Very well explained, you made my life easy, cheers mate!

[@ramonhall5261]

Screws are used in the drums to allow motor to apply equal closing pressure on both sides of the door I would assume?

[@JoshSpalding]

I was trying to figure out why. That's the only thing I could come up with as well.

[@user-yo1bj2lv8x]

For security. If you don't pin the door at the closed position then technically, even though the door is locked, you can still lift the roller door up and balloon the roller door off the drum and potentially someone could slide underneath the door if there is enough space. Pinning the sheet prevents this.

[@justinolden1920]

Is that particular one a cheep version of the ATA GDO6 ??????

[@cordialementz1365]

Clear and concise instruction thanks.

[@user-og7il2wf3w]

Why add the screws in drum?

[@StanleyFerguson-y5w]

do you leave the 2 screws in the drums

[@vaskodimoski5690]

Whats the purpose of the screws in drum

[@rasheednedissery9010]

Very good 👍presentation thank you

[@reefingaround4435]

You forgot to mention the removal of the pinning screws.

[@anandpanchbhavi]

So, nicely explained. How about the description/brand of tools that you bought?

[@autoopeners2613]

We give a breakdown of the tools required in our manual. autoopeners.com.au/wp-content/uploads/2018/05/AO6v3-Roller-Opener-Manual.pdf

[@anandpanchbhavi]

@@autoopeners2613 thanks

[@jimmeyrowlett5050]

Will it fit a live shaft door.

[@justinolden1920]

He adds the screws into the drum so when the door is closed no one can open it

[@nigelboyd6613]

Hi, when setting the limits on opening the door will the motor keep running until you stop it or is there a maximum number of rotations? If I have a very light door but say 1M wide x 8M high, can I set the limits so that the motor will keep running for the full 8M door height?

[@autoopeners2613]

Hi Nigel, there is a hard limit of 3.2m high on these openers. For higher doors, the Door Master might be a better solution.

[@ThePolaroid669]

Very cute!

[@vickylubana4721]

Hi my remote is not working and door is not opening by remote but it open manually and also opening from the inside button on machine any suggestions what i do Thanku

[@eedelsthegamer]

can one install a back up battery

[@tungtran100]

Very good and helpful thanks

[@atusayemwalwanda5413]

Thanks

[@louisianaweekends7908]

How do you install it on a door with tensioner springs on each side

[@autoopeners2613]

You might have a different brand of door. Our Sectional Opener would be the best opener for you.

[@virajjayasinghe7429]

clear instructions. Good job mate

[@reesejohnson2220]

Would like to know where I can purchase the auto openers couldn't find the thanks

[@autoopeners2613]

Hi Reese, if you are looking for an online retailer National Garage ship these out worldwide. garagedooropenerremotes.com.au/ If you are looking for a local installation, feel free to call us on 1300 42 88 66 and we can point you in the direction of a local Authorized Dealer!

[@benitocarbone2483]

Very good well done

[@mornejafta1952]

How much is the motor n remote

[@lostmysoultoday9005]

Top job mate.

[@MarkSmithhasgreatmindset]

Did not see web link here

[@jamespatterson1433]

What is the weight or torque it can pick up?

[@tumaholemokau7121]

Manually

[@Bass.Player]

Why add the screws in the drum?