How To Install A SAAS Pillar Pod With Gauges!

[@robertboyd321]

My power wire (2015 MN) was in the same place but it was Red & Black. You can tap into the light wire in the lower dash panel just above the power socket/Cigarette lighter for illumination. It only works when you switch on the lights. There are a couple of good earth points, one is the fuse rack bolt on the left side of the fuse rack & there is another just below the right hand pillar & behind the kick pannel (it's the easiest- just a 10mil bolt.

[@pattysherd04]

G’day mate, where did you connect you positive and negative wires to? Straight to your battery or did you tap into something in your dash ?

[@garyclough8231]

Your Vid is well explained,think im going to add a gauge like that to my L200. Whereabouts you live looks nice ?

[@4x4CampingandAdventures]

Bunbury now mate this video was recorded in Esperance thanks for watching mate

[@johnmay330]

Hey mate. I Teed into my vacuum line on my 2016 Dmax and my needle actually goes backwards. What did I do wrong? I have the SAAS 20 psi diesel boost gauge.

[@rastus555]

Love your videos brudda i dont own a triton but enjoy your videos i own an nm 3.2 turbo deisel pajero 👍

[@4x4CampingandAdventures]

+RT Skinner same brand mate 😂😂 its all good Im glad you like them.

[@rastus555]

True im looking at fitting an egt gauge soon but Will have to tap out probe hole as i got the stock Mitsubishi exhaust

[@4x4CampingandAdventures]

+RT Skinner yeah mate pretty easy to thought should be simple

[@muzzaball]

Thanks for sharing, I was just looking to add that same (Nissan) SAAS pillar pod to my car so very helpful to see how it looks. Also, I was wondering where I was going to get into the ign wire - remove shroud and go from switch! Cheers mate.

[@pJ09_90]

Hi, I have a problem with my boosts gauge, it rising really slow when I step on the gas. I followed every procedure like u did on this video 😞

[@akg243]

Esperance for the win :)

[@roosterjts]

Bloody brillent when installing my own, made it easy. Now i have got to install a snorkel in my mn. Lol hit me up if you want to do it cause i sure as shit have never do it lol. On the serious note i need to get to the blanks to put the switch in for my spotties and the plastic isnt coming off. Any tips?

[@Phil_McAvity]

Good ‘how too video’. You say “obviously” heaps!

[@4x4CampingandAdventures]

+retry tobuy yeah mate I noticed that bit of a nervious thing infront of the camera or when im thinking on my toes I resort to using that word. Thanks for watching and being a long time subscriber mate!

[@Phil_McAvity]

It’s all good, Iv just got back from 3 weeks camping, 4x4 & fishing and now I’m home catching up on all the KZbin videos. Keep up the good work 👍🏻

[@joshtowers723]

Hey mate where about did you put the oil pressure gauge bolt?

[@lauramorris8128]

thanks for sharing just wondering where about's diid you put the vacuum hose?

[@4x4CampingandAdventures]

Hey mate a Tee piece off the Maf line

[@vincentmorabito8580]

Hey mate did you have a boost controller?

[@connorchiarelli9541]

hey mate, I fitted the same saas boost gauge today. It only is reading 5 psi at 2000rpm when sitting in the garage. would there be any difference if I was to actually drive the car? it just doesn’t seem right to me. the reason why i’m asking would the reading be different is because I can’t test drive the car at the moment as it’s in bits and I need to put half the car back together haha!

[@4x4CampingandAdventures]

+Connor Chiarelli what kind of car is it mate

[@connorchiarelli9541]

4x4 Camping and Adventures D4D 2007 Hilux

[@4x4CampingandAdventures]

+Connor Chiarelli seems right to boost but while sitting still it should not read much if anything mate.

[@connorchiarelli9541]

4x4 Camping and Adventures thanks for the reply appreciate it. i’ll try get the car back together tomorrow and give it a test drive and see if hits around 15

[@4x4CampingandAdventures]

+Connor Chiarelli it should crack 15 being the standard pressure

[@remyche8768]

What colour wire is the lights for the numbers just hooked up mine and the numbers don't light up

[@k4otic_nz816]

Is this a TD Triton? When getting boost gauge for a diesel does it have to be a certain one?

[@4x4CampingandAdventures]

It is a turbo diesel mate you don't need anything specific just one with out a vacuum you just want a straight boost gauge.

[@SKESE789]

Looking forward to the battery setup, cheers.

[@4x4CampingandAdventures]

Steve Slese its going to be a good one mate!

[@darcywaud1239]

Does this work if you have srs air bags in

[@outlawdingo3020]

Only thing is the elec tape round the heatshrink 😂 but everyone does things differently, you could’ve gone a bigger piece of shrink around all the connections you soldered up and covered for neatness

[@thatwhiteguy0013]

What glue did u use?

[@joejojo4751]

Hi, good video, where did you get your dash carpet from? Joe

[@4x4CampingandAdventures]

Hey mate it came with the car.

[@joejojo4751]

4x4 Camping and Adventures must be an Australien thing we don’t get them over here , but could do with one with this French sun! Ta. Joe

[@thatwhiteguy0013]

Where’d u get the pillar mount from?

[@4x4CampingandAdventures]

EBay mate

[@jaybajan]

would this gauge work well on a D4D 3.0L Toyota Hilux?

[@4x4CampingandAdventures]

It sure would mate.

[@rains232]

is the column universal fit? or is there different columns for differnt cars from SAAS?

[@4x4CampingandAdventures]

Yeah they do mate

[@maxr6475]

Nice why not show where the illumination wire is

[@maheshsamarakoon007]

Thx mate

[@alc7505]

How come the boost needle appears really jumpy? Is it that bad in real life or does the video just make it look that way? Cheers

[@4x4CampingandAdventures]

Might be the video mate it's normally pretty smooth but it does spoke to 25 then regulates to 18psi

[@alc7505]

4x4 Camping and Adventures have you got a big turbo?? 25psi seems incredibly high for standard turbo or is that norma on Tritons? Good video btw 👍

[@4x4CampingandAdventures]

It's the normal on tritons to spike like that the wastegate brings it back to 18psi which is max psi from factory

[@AndrewTinWA]

You said “obviously” 48 times.

[@4x4CampingandAdventures]

I’ll do better next time