HOW TO Install a T-Post Clip for Fencing Fast & Easy!!!

Welcome to RidgeLife. In this video, we show a quick and easy way to install a t-post fencing clip using nothing but a simple screwdriver.
Join this channel to get access to perks:
/ @ridgelife
Join the RidgeLife Family by purchasing one of our new Bonfire RidgeLife Tees
www.bonfire.co...
Please visit our Amazon Store where we have many of the products we use and review on our channel. We get a small commission for your purchase but there is no cost or markup for you. If you search and shop from the link, we also get a no cost to you commission! Thanks!!!
www.amazon.com...
Please Subscribe to our Channel to see more from The Ridge.
Have a Blessed Day!!!
Tim Roberts
PO Box 316
Oakland, TN 38060
[e-mail]

[@bluemax229]

I think I have now watched about a dozen videos on installing T-post clips. Hands down. . . this is the most simple and quickest way of doing it!

[@RidgeLife]

Thanks!

[@jeremiahhunt1998]

Thanks! I used this method to install 200 feet of fence today. Worked great!

[@RidgeLife]

Awesome! Glad it helped!

[@FreeClimbersNet]

Quick, easy, and really, I was going to twist both of them, but this makes perfect sense. Thanks for the quick, to the point video.

[@RidgeLife]

Glad it helped!

[@Amy_McFarland]

These are the kind of tips that will come in handy for me! Edit: spelling correction :)

[@RidgeLife]

Awesome! Take care.

[@mickichikwinya5519]

This is the easiest explanation and tool of them all. I actually used a shorter pen to twist some as my screwdriver was a little long to fit between the welded wire. I'll use a pair of pliers to pinch the other end. Thanks, Tim.

[@RidgeLife]

My pleasure! Thanks.

[@MaHolli2017]

Perfect video. Simple and to the point. Thanks

[@RidgeLife]

Glad it helped!

[@thewarrior777]

Thanks for the short quick and simple tip. Tractor Supply is the shizz, love that place.

[@RidgeLife]

My pleasure. You got that right!

[@ThereIsNoRoot]

You saved me an hour of struggling with pliers. Have a ☕️ on me.

[@RidgeLife]

Thank you so much! My pleasure.

[@JBDunn]

Finally! A simple clear quick explanation on how to properly attach t-post clips without trying to sell me a tool.

[@RidgeLife]

Glad you liked it!

[@venidamcdaniel1913]

Gee so easy. I couldn’t figure it out. lol. Thank you thank you so very much.

[@RidgeLife]

You are so welcome!

[@midwesthuntingoutdoors]

Nice job on. Appreciate how quick it was.

[@RidgeLife]

My pleasure

[@c01hutcheson]

Simplicity itself. Thanks!

[@RidgeLife]

You bet!

[@HomesteadingNorthernMichigan]

Like a pro.... Go RidgeLife!

[@RidgeLife]

Thank you sir!

[@phillyredsox9195]

Thank you.

[@RidgeLife]

Welcome!

[@rodreddick]

Thanks for the instructions

[@RidgeLife]

My pleasure!

[@stepmohead]

Thank you. Thank you. Thank you!❤

[@RidgeLife]

You are so welcome!

[@eugenia-alanamitsanas3469]

THANK YOU :)

[@RidgeLife]

You're welcome!

[@danh6948]

Thank you so simple once I watched

[@RidgeLife]

Dan H thank you! I bet I had to google a bunch of times before I said I would make my own video!

[@danh6948]

@@RidgeLife Now I found your cane corso gland draining video I need to do this to my female pit. She not as laid back as your boy. Had to sub you've been helpful.

[@RidgeLife]

Dan H ha! Good luck and thank you so much!

[@WhatWeDoChannel]

Thanks, I learned something! Klaus

[@RidgeLife]

Glad I could help!

[@jonny5.45]

Thanks brother

[@RidgeLife]

Welcome!

[@ShakeandJake]

Great video buddy. 👍

[@RidgeLife]

Thanks!

[@reliefmango6]

Could've used a wire twister too. Saw a Facebook video about them just now.

[@RidgeLife]

Those are nice!

[@SIRJAMESARTHUR]

Sir thank you

[@RidgeLife]

My pleasure!

[@gregn2909]

I'm looking to build a fence like this, what are the search terms for the wire length, is it just a certain gauge steel wire?

[@RidgeLife]

Search straight wire fence.

[@GiselaProdhan]

Thanks for the breakdown! I have a quick question: I have a SafePal wallet with USDT, and I have the seed phrase. (behave today finger ski upon boy assault summer exhaust beauty stereo over). How should I go about transferring them to Binance?

[@RidgeLife]

?

[@nancybaumgartner6774]

Thanks for direct info without a lot of stupid and annoying intro music and chatter

[@RidgeLife]

Thanks! I’ve learned that is a waste of time as I started doing this. Forgive the earlier videos! Ha!

[@Inmate533]

That’s looks easy to do with just a single strand of wire, but I think that’ll work for any type of link fencing.

[@RidgeLife]

For sure

[@p0k7lm]

Tnx,excellent ! 👍

[@RidgeLife]

Welcome!!

[@rville5]

You put it on upside down

[@RidgeLife]

Hmm...

[@OffGrit]

They go on either way. I have thousands of feet of fencing done this exact way

[@rville5]

Sorry but its wrong just trying to help you and I build alot of fence. You keep doing you and I will keep doing me and we will have to respect each others way

[@OffGrit]

@@rville5 ok so since you have declared that you have done a lot of fencing... Your statement is automatically correct....no that's not how it works. In fact if you want to go into this further, it would depend on if there was a barb right next to the t post as to which way you would orient the clip. It makes absolutely NO difference to the structure of the fence. If you even look up videos from fencing companies you will see it done the way he showed (orientation wise)

[@hostilesavage4299]

​@@rville5you are right. I agree. I seen the clip in this video is the wrong way 😂

[@kylemiller7915]

Now make a video showing how to pull a t-post out of the ground. That’s my problem with t-posts

[@mrmotofy]

Wrap a chain around it attached to a 2x4 and a fulcrum of some sort. Like a tire or a chunk of 4x4. Use leverage to lift it out kinda like an engine hoist does.

[@RidgeLife]

You got a tractor? Ha!

[@stacyboyett2823]

A t post puller also works really good...

[@timhansn362]

Why you put them on upside down and make it to tight? The wire needs to slide a little .

[@RidgeLife]

Hmm. It was the way the clip instructions on the package indicated and the way I was shown years ago. They slide very well. Thank you.

[@Defender_Tom]

Nope. Not how they’re designed to go on

[@RidgeLife]

Yes. Perfectly.

[@ayonnabyram1103]

If your gonna call somepine wrong, would you not waste everyone else's time and say the right way? Until someone does better, he's right.

[@johnskunk609]

I appreciate you getting to the matter and showing how it's done.Some have spent 10 minutes going on about a 2 minutes subject. Thanks!

[@RidgeLife]

Glad it was helpful!

[@amyelizabeth8432]

Thank you for keeping it succinct, and not over exasperating the subject!

[@RidgeLife]

My pleasure!

[@quintonayaan4440]

A trick : you can watch movies at flixzone. Me and my gf have been using them for watching a lot of movies lately.

[@vincentshepard9304]

@Quinton Ayaan yup, I've been watching on Flixzone} for months myself :D

[@paultalon4414]

@Quinton Ayaan yea, have been watching on Flixzone} for years myself :)

[@huxleybrentley1980]

@Quinton Ayaan Definitely, I've been using Flixzone} for since december myself :D

[@KyleMerl]

Great video! quick, simple and to the point. Thank you sir.

[@RidgeLife]

Glad it helped!

[@wendellhill4549]

Excellent SHORT video,... Only 1 suggestion, I picked up from other similar videos: ALWAYS put the short hook on the other side of the T-post so the HOOK is facing UP, because gravity sucks! (less likely the fence will come out when/if it loosens up!

[@RidgeLife]

Thanks! The bag actually came with instruction and this is how they showed it be done as well.

[@matthewl1187]

What are the specifics on that wire you have on the fence? I need to put a fence around my septic field at my new house. I used flimsy electric fence wire to pass inspection but probably need to put some hard wire up using the clips I bought to last longer. Thank you in advance.

[@RidgeLife]

I used straight wire from tractor supply. You can get it in double with no barbs too. Very strong!

[@strongheartwoman1931]

Thank you so much for your clear, concise, short video on installing these clips! Finally found your after wading through 5 other videos! New subscriber!

[@RidgeLife]

Glad it helped! Thanks!

[@strongheartwoman1931]

@@RidgeLife You're very welcome!

[@jere846]

That will not hold against sheep. This guy is wrong.

[@RidgeLife]

Why would you use three strands of single wire for sheep? This was just a barrier fence for vehicles. For livestock, you would need a different setup. But it’s the same principle with the clip.

[@darolfitch8917]

Yes, thank you. As a city boy I had no idea how repair my fence, appreciate that.

[@RidgeLife]

Glad to help!

[@the1plantguy]

I needed this two weeks ago! 😬😂 saw another video to get me through. Your video here is great! I used my T-posts to secure 4 arbor trellis’ I made using cattle panel fencing.

[@RidgeLife]

Nice! Thank you very much!

[@rottweilerventuresregister7293]

I like the video! Why is the top of the T post white?

[@RidgeLife]

For visibility.

[@ThorCollard]

THANK YOU!

[@RidgeLife]

You're welcome!

[@Bob-gn8ph]

❤John 3:16❤

[@RidgeLife]

Yes!

[@ericksalgado8058]

Thank you

[@RidgeLife]

You're welcome!

[@kensmapleleafretirement]

That is cool. I never saw those clips before. Slick...

[@RidgeLife]

Thank you sir!

[@ErnieHatmaker]

I have to do this soon...

[@RidgeLife]

Good luck!!!

[@timothygardner2974]

Mannnnn quick and to the point and Ive learned something usable and cool, THANK YOU!

[@RidgeLife]

Great!

[@mj625]

Quick question...I am installing a wire fence like this for a small garden. How did you do the 90 degree corners with your t-posts and clips? I have a feeling these clips won't work very well when bending the wire for a 90 degree turn....

[@RidgeLife]

I didn’t do turns. I started new runs to secure each strand. Good luck!

[@TheCorgills]

Short and sweet ol son!!!!!

[@RidgeLife]

Oh, yeah! It got 1200 views in like not time! Crazy!

[@tp8030]

Works fine with 1 strand. If it's field fence use a 16 or 20 penny nail or a Allen wrench. They work freat

[@RidgeLife]

Thanks!

[@brianferris1233]

thank you for sharing, RidgeLife 🌲🌲🌲🌲🌲

[@RidgeLife]

You bet!

[@richarddiannepeters4931]

Thank you so much for keeping it simple and saving us some money!

[@RidgeLife]

You are so welcome!

[@2ndhelpingcooking963]

Hope your family is doing well.

[@RidgeLife]

Thank you and yours as well!

[@MickyBellRoberts]

Short and simple.

[@RidgeLife]

Oh, yeah!

[@deborahmccloskey8654]

short and sweet and very useful..THANKS!

[@RidgeLife]

Glad it was helpful!

[@HiveandHoller]

Handy tip. Thanks for sharing

[@RidgeLife]

Happy to help! Thanks!

[@bradycato9758]

Many thanks Sir, great video!

[@RidgeLife]

Thank you!

[@peanutbear]

Thank you! Great video.

[@RidgeLife]

Thank you!

[@the.a.jeffries]

Thank you!

[@RidgeLife]

You're welcome!

[@thecloudycorgi]

Thank you!

[@RidgeLife]

My pleasure

[@elissalangdon5202]

Much appreciated 🙂

[@RidgeLife]

Welcome!

[@russconklin3414]

And my livestock will cut themselves on the wires sticking out.

[@RidgeLife]

@@russconklin3414 good thing you don’t use barbed wire fencing!

[@russconklin3414]

@@RidgeLife I don't. I use pipe.

[@RidgeLife]

Great!