How to Install a Tempered Glass Screen Protector on your Phone

[@sunnyscott4876]

Thank you so much. I am a 73 year old lady and I just got a brand new smart phone. Your suggestions are excellent, especially using Scotch tape as a hinge. I didn't get me screen protector on perfectly (a few small bubbles) but I can live with those. You can only see them if the screen is completely black. Thank you again for ou very kind and helpful suggestions.🧡💛💚

[@jorka4691]

so sweet!

[@cynthiashores57]

I watched several of these instructional videos - this one was the best, clearest, and most helpful. I won't remember this 5 years from now! I used an empty Amazon gift card as a squeegee! 😊 😂😂😂

[@kathyphillips2727]

I was recently quoted $40 dollars at a phone repair shop so i bought a twin pack online, the same as the one demonstrated in this video and it was under $10 & all i had to do was learn the how to...so thankyou for your valuable video, very much appreciated 🙏

[@mastersofimpact5740]

After taking my phone to a shop for years when it was time to refresh the glass, I decided last night to remove the tempered glass on my own and install a new one. I watched several videos, but I was still hesitant to give it a go. Until you saw your video suggesting to hinge the screen on one side with tape. I am so pleased with the result. It's absolute perfection, far better than the shop installation that was always acceptable but had a little bubble here and there. Thank you so much!

[@DrMurdercock]

How much if you don't mind me asking? I think I've been in the wrong business of fixing game consoles, I should be offering this as well

[@mastersofimpact5740]

@@DrMurdercock £10 in London done, but I remember paying $30 in the US years ago.

[@DrMurdercock]

@@mastersofimpact5740 You know, after thinking a bit. I never attempted to do this before seeing this video. And if I had an expensive phone and the cover was also somewhat pricey, I would have probably taken it in too. I wouldn't feel right charging 30 charging bucks for this. Who ever charged you that here needs to step in fresh cat poo. 10 bucks you is like 12 bucks me so thats way more in the ball park of paying for a service like thart

[@wayneborland6974]

This actually was the first time ever I tried to install a Screen Protector. I went from the video to our two phones following directions to a tee. I did good and actually surprised my wife. Today was a good D A Y. Just follow the instructions and you shall succeed. Have fun and good luck.

[@gamer2101]

Happy wife=happy life!! Lol

[@eattapringle911]

I change screen protectors a lot, and I find this video every time! Yes, I know how to by now, but there's just something about working alongside someone who knows what they're doing... 😂

[@sherry356]

This is hands down the best video I've seen so far on how to install a screen protector. No other video mentioned using tape or stickers as hinges. They kept going on about steam or some other convoluted method. Thank you!

[@leart78]

used tapes on iphone from 2013 and even back in then i watched youtube tutorials

[@shaniyahmoody1416]

@@leart78 I

[@rawlsrules]

It is an excellent demonstration and it is greatly appreciated by someone brand new to this stuff. Thank you.

[@snowballinhell]

I did it, I put my glass protector on my phone. Went great and that is because of your great directions. Thank you!!!

[@jayczzzya]

Installing a screen protector used to feel like brain surgery before I watched this video. Your instructions were perfect. There was a scary moment though when I noticed in the corner of my eye my cat was staring at me the whole time waiting to pounce on the screen and get her fur in there just before I pressed the screen protector. But, she behaved.

[@chocho6766]

nice cat

[@erysyy]

this made me so anxious dkfjhdjkfh

[@rmwolfe]

😂

[@notundermywatch3163]

lmfao must have been so nerve racking😂 My four year-old walked into the room and came breathing in my neck right at that moment getting ready to poke it any time. I kept my cool and said " Honey, please get out of the room."

[@GreatMindsSeekTruth]

I’m cracking up right now because I just told my kitten to get her hairy tail off my phone 🤣

[@anna-cp7fr]

I was always afraid of using the stickers/tape tip but it worked SO well and I put on my screen protector completely well aligned and with no bubbles/dust left. Thank you!

[@kenwayne8483]

Now, You Did a Very Nice Thorough Clear and Slow Process showing how to accomplish replacing a screen protector. Thank You Very Much. Excellent Video Instructor!

[@christwist8397]

Very helpful video. Some suggestions: - As you lower the protector, push 3 spread fingers from your spare hand against its hinged edge. This prevents the edge of the protector from raising slightly and shifting. With this technique, there is no need to use a stickier tape. The provided sticky tabs work well if you do this. - When making minor adjustments, the provided sticky tabs are easier to adjust than very sticky tape. - Before removing the protective film, practise the folding technique repeatedly, until you are certain that you are doing it correctly.

[@SANA-bw2nx]

Very helpful to encourage people to do it by themselves. I had change mine at the mobile store the price with 5 times more expensive than the real price of the glass screen. Thank you for the clear demonstration without wasting time.

[@saracosta1989]

First, thank you SO MUCH for not trying to be "cutesy" or long-winded with the intro...no one likes that, and you got straight to the point. Second, you are extremely well-spoken, concise and meaningful; what you said and pointed out made absolute sense and was very easy to follow. Whatever you do or your career aspirations are, you make a great speaker, trainer and presenter. Well done here. One slight hack: rather than making multiple "hinges" with the tape, apply it LENGTH-wise (not width wise in several places) and you'll get a much better/solid "hinge" as well as a better gauge on whether or not you've aligned it well (the tape will becomes your guide).

[@mi2maui]

How about using 1.88" FROG TAPE for the hinge? One piece length-wise? I just bought a roll for other reasons, is it sticky enough? I think so ...

[@sskzzx]

this was my first time installing a glass protector, i usually have it done by the people who work at the place i get it from and this video was endlessly helpful, i managed to flawlessly do it to mine and my mom's phones!! thank you so much, this is the best tutorial ever

[@daniel.d2150]

By far this video has been the best method, and I have fixed it on with the best results. Thank you from Scotland UK.👍

[@eilachisholm5037]

This is a very clear explanation how to put on the screen protector. Very cleaver way to use the tape. Thanks so much. I am glad I found this video!

[@sagittariuskitty]

Thank you so much for the tape trick ❤ I made the hinge, cleaned the screen again, peeled the tab off & let go with my eyes closed 😂😂 opened my eyes & it was bonding to the screen with no air bubbles 🥳🥳🥳 I will tag this video in my Amazon review as a reference.

[@echosierran19]

Thank you for this! I bought a phone case online and it literally came with no instructions. Your tips made the process seamless!

[@asktarotkim2326]

I watched the video link that came with my screen protector, but they talked too quickly plus some extra implements for application were used that I didn't get in my package so it was confusing as well. You present a very friendly helpful video very suited to the middle aged+ crowd. Thank you.

[@wakeup7157]

I have just put mine on by following the process. In a few seconds it sticks automatically perfectly without any bubble. One more tip - I folded a bit of the edge of the tape so that it's easier to remove from the protector.

[@mcfx3480]

Tip: make sure your phone is powered off when you do this so no one calls you or texts you potentially messing up the process

[@jake38201]

nah no one text me I’m good

[@Noooname2024]

I dont have friend so I dont need to switch off my man xddddddddddddddd

[@AD-cy4vj]

Lmao

[@Den57701]

This literally happened to me when I was putting my dad's screen protector on

[@cra2yey338]

Airplane mode? Lol

[@primis82]

Thanks so much for clear and easy to follow instructions, I never knew what those guide strips were for before!

[@mercedesescoto-wagner4015]

Thank you so much as long as I have been using tempered glass I always messed it up for the sheer fact that I had no idea what the guide stickers were for and finally this time my tempered glass is on without dust spots inside and aligned perfectly! Thank you for this video!!!

[@ChaniiStyles]

This technique worked perfectly. I used to try to go from the bottom up but the hinge method is much better!!! I got absolutely no bubbles! Thanks for being so thorough

[@CarlosYT2001]

Hello there

[@angrydogface]

Very helpful. The cover didn't come with any instructions!!! Your video made it all easy and doable. Thanks!

[@lakshaymd]

The tape hinge thing is a really cool idea that was missing on the instructions of my package. Installation was a breeze with this. Thank you.

[@dankeith6756]

I've only installed one screen protector and it didn't go well. LOL Never tried the hinge method. It worked great!! Thanks

[@wakeupuk3860]

As an ex teacher from industry who has taught Physics and CDT to kids and novice teachers it is an absolute delight to find a KZbinr who actually knows how to present properly, very clear, nice touch with the tape, warm enthusiastic voice and considering in the past with two older mobiles made a right mess of things, now feel very confident of doing it properly. Will certainly now look to see what else you have on here.

[@wakeupuk3860]

Did as you showed us and did a good job. Thank you. 🙂

[@uzoogbonnah7825]

@@wakeupuk3860i❤

[@ophelion3641]

Thanks for your walkthrough, dear sir. Installing glass is always terrifying (what if a speck of dust remains under the glass forever, what if it is 1 mm off, what if, ...), so your video made it much easier for me.

[@ronch550]

It's much easier to install glass than plastic screen protectors. Much easier to avoid bubbles.

[@wanderingandroid]

that speck of dust will annoy you especially if it is somewhere in the middle. the glass i just installed had a speck of dust but thankfully it is somewhere along the edge. so i can live with it.

[@pennyhardaway7491]

Turn on shower for 5-10 mins to steam the room and reduce airborne dust particles

[@theyjustwantyourmoney4539]

Thanks for the tape hinge idea, 🙏 I was dreading to even start the installation bubbles

[@Bossmanrocks]

Thank you so much for this. My kit did not come with tape to hold it in place, so it is great to know that I can use regular tape to do the job.

[@jswarpaint6215]

Great video thanks for being thorough - Realizing we are looking for a video to help us do something that we may be completely clueless on what we are doing

[@ShastaBean]

First time putting one on...no telling what sort of cluster-jumble I would have accomplished w/o your video. In the end, it came out perfect! Thanks!

[@RadimSafran]

Wow, I just used your technique and I'm amazed at how well it works... 👌☺

[@TuzeTea]

TAPE HINGE!! this is awesome it worked perfect. my phone has a built in case I can't take off so when I tried to put the last screen on i couldn't get it quite right and peeled it off and put it back on a few times. it was crap. I just realized I have an extra screen and found your video. I feel like a pro lol

[@sjbwbieind]

Thanks so much for this! Was worried about putting a screen protector on my new tablet, but I got it on just fine!

[@LoLa-uf8yu]

Thank you! I thought I had destroyed my last screen protector when I removed it to get a speck of dirt off. Washing it and drying with a hair dryer worked! ❤

[@imadaaoun]

This was an excellent video demonstration. Thank you so much. One question : do you have a method to remove scratches from the mobile screens ? Thank you for your reply .

[@sherylanecarino5454]

Installed tempered glass on my phone for the first time. Thanks for sharing this helpful video!

[@domainNameDotCom]

This was very helpful. I'd only add "make sure you have a bright picture on screen so you can check alignment really easy"

[@mcpardanme3443]

Lmao yeah I had to have a bright screen to check the alignment worked out great tho

[@jayc3110]

That was an excellent and detailed demonstration. Well done. Thank you and best wishes.

[@kevinwhitley5577]

Awesome advice just bought a really nice promotional cell phone bad thing is there's no accessories available yet other then what come with the phone so only one screen saver most don't get it right the first time including myself however your video helped me ace it the first time and no bubbles either . Thanks my friend

[@MariG-uc1rw]

Thank you! Tape is the way to go to hinge I applied mine perfectly for the first time ever, proud moment! The little things. Thanks again!

[@TiredBunni]

It has been 2 years and this is still such a helpful video!!! when I was trying to place a screen protector on my tablet but had no idea what the tape it came with did this video made it so I didn't goof up at all!

[@mi2maui]

I went to APPLE store yesterday and asked for help putting my new protector on thinking since I spend $$$$$ there they would be helpful. NAH! You have to overpay for a protector for them to help!!! So here I am, thanks this is very helpful. I feel like your steps provide the safety net I need to be brave!!! Do you have a video on taking off the old screen?

[@bigreaderpike]

Thank you that was better explanation for what to do with stuff than a lot of the professional ones I seen for my other phone screen protectors

[@dgriffin6074]

Perhaps masking tape e.g. the blue 3 M painters' tape would work better for the "hinges"? I know some of the screen protector companies supply a model specific plastic frame to ensure proper alignment of the SP and phone screen. I just used one with on my Galaxy S8, and it was the least troublesome installation I've had and no bubbles whatsoever.

[@cbsakron]

Thank you for your video! I have a perfectly placed, bubble free phone cover. The tape is an awesome idea!

[@JWiLLfoReaL]

I tried this and it worked no bubbles. Instant subscriber.

[@JESUSCHRYSLER5512]

**LIAR!!!!**

[@JWiLLfoReaL]

@@JESUSCHRYSLER5512 not at all you probably doing it wrong.

[@bobbycole3968]

This method works great, it would be hard to foul up, installed mine with no problems at all...Thanks good video.

[@danielamarinsejnaui9611]

What an amazing video!!! Worked perfectly following your instructions. Thank you

[@easyrider7293]

I am an engineer and this was the best video I have seen. I have installed several tempered glass screen protectors and always had trouble aligning the glass to the phone. Sorry to admit I hadn't thought of the tape trick. Thank you for pointing out the obvious.

[@murderdoggg]

Thank you. The trick of using the tabs to hold the glass straight really helped.

[@gabriellakorda7477]

Thank you so much. I used your guide and feel like a professional haha. It worked perfectly and I don't need to waste money anymore for someone else to do it for me 😀

[@jonelljones5631]

Thank you for making this application so simple.😊

[@komalsingh30677]

Excellent job .For the first time I have put my screen guard perfectly!!!!Thank you so much

[@supersaiyanjohn]

Just did it perfectly without a single bubble, thank you !

[@jackmullane1242]

This is a good video, very easy to understand well done

[@PhysicalHydrology]

Thanks so much! Your method works well! Did not see the black part forming for my particular protector screen, but no bubbles: the protector screen fitted perfectly in one go.

[@Trish7725]

This worked like a charm. I am so happy I checked you out, saved a lot of money.

[@KaranSingh-t5b3y]

watched it now, for my 15 pro max.... thank you... it work perfectly..

[@RainbowUnicorns2023]

Hi Geo, thank you so much! First time I ever installed a screen protector! Total success with using tape!👍🏻👍🏻👍🏻👍🏻👍🏻

[@lelo4718]

Applied an iPhone 12 glass protector following every steps in this video and it came out flawlessly

[@manotalk2]

Excellent Video!! The tape made wonders, aligned perfectly throughout the screen. Going to do this for my family members too 👍

[@johnmcginnis4174]

Thanks!

[@MrBen101199]

Thank you. I didn't know what was the "guide stickers" for. So I just installed the protector without them 😂

[@lizpahlke379]

This was a very, very helpful video. Thank you!

[@zacharyerhardt4388]

Thank you for being so detailed in your explanation. This helped me immensely!!! Thank you again!!!!!

[@JosephDalessio-tf5cd]

Thank you This video helped me to put my tempered glass on my Nokia C02 without bubbles.

[@philwilliams8328]

Great idea using the tape. Worked flawlessly and not one little bubble to contend with.

[@vittorio-vic-giammona2604]

This video is like the Holy Grail for a screen protector's application. Thank you.

[@misswordlesswonder]

Thanks so much for this, super helpful and you explained it so well, my new phone is protected and doesn't have any bubbles!

[@xphoebe25]

Thank you kind sir for the video from the bottom of my heart

[@aakk1164]

the hinge trick was everything, thank you!

[@IwdddeDOawwa]

Thanks for this video. Managed to install the protector without any issues!!!

[@Bulldogandtea]

Brilliant, thank you very much! 🙂

[@mutsasamanthasithole2108]

Thank you, followed your instructions and it's flawless!!

[@sandraparsons4557]

Thank you.....This helped very much. 😀

[@mjp23]

This is always a very challenging thing to do. I didn't know how to use the tape or sticky guides, so thank you

[@Dahstin]

You are a damb genius Gump! You will be a 4 star general one day...outstanding!

[@Thetatteddad6000]

First comment of 23 and of all the ways to help it get on right it’s tape. I never would’ve thought of that. You saved me a lot of hassle and thank you for making this! 👍

[@JohnGlen502]

Lots of big tape as sturdy hinge on other side of pull tab was super helpful. Thank you.

[@mae4825]

A super helpful video! Instead of tape for the hinge, I used a 1" x 3" Avery Multi-Use label. Since it's more rigid than tape I had no worries about anything shifting when I opened the hinge. I was able to fully open it to remove the backing and everything was still perfectly aligned when I closed it to install. Since the labels are removable they came off easily when I was finished with no residue. I also used a piece of one to make a little "handle" on the opposite side so I didn't have to touch the glass to move it.

[@PLAZALINK]

Thank you Mae, you helped me a lot, thanks!

[@mae4825]

@@PLAZALINK You're welcome!

[@craigcraigster4999]

Thanks for this tip Mae. Question: how many of those 1"x 3" Avery Multi-Use Labels did you use, and did you create the hinge by placing the 3" side of the label(s) horizontally or vertically? (My phone is a Moto G Pure with a 6.5" screen.)

[@mae4825]

@@craigcraigster4999 I placed one label vertically, centered on one of the long (side) edges of the screen. You could use an additional label, or piece of one if you feel one label isn't secure enough. Hope this helps!

[@craigcraigster4999]

@@mae4825 Thanks Mae! I also like your idea about creating a "handle" with a spare/additional piece of label, makes good sense. Thanks again.

[@VengeFulHemi]

Great video, excellent tip with the scotch tape too. For the bubbles you could use a kitchen rolling pin(very gently of course), or buy a dowel frome depot or Lowes before starting another screen protector job.

[@GrammyGottaGo]

I have always had good luck with a credit card

[@haleyh2912]

@@GrammyGottaGothat’s what I use every time a credit card and it works well

[@pm8196]

Simply the best video.! Good on you for keeping the instructions simple

[@oakjand]

Excellent instructions! I had zero bubbles to push out.

[@davideweir2473]

Excellent! I would never have thought of that. I used masking tape for ease of removal.

[@janesmith5607]

Wow, huge thumbs up for this video 👍👍👍 I am so not handy with these things still I have just done a perfect job 💃💃💃😃😃😃 I am soooo happy, thank you so much 💓

[@patwiggins7299]

This was perfect! Great video. I still ended up with what seems like a tiny flaw/bubble thing - bu nothing compared to the old cracked screen protector I replaced. Feels like I have a new phone 😂- but, no, it's pretty old, it just looks great now.

[@marshamcintosh4790]

Best instructions out of the 3 I listened to! Thanks!〕

[@Hope-ip5fj]

Best video ever, no bubbles. Perfect!!

[@lisaistyping]

DUDE I'm horribly OCD and even tho i have 2 just in case, i was still scared shiteless that i was gonna end up with a cover that isn't 100% perfect and I just- triggered! Lol But this video helped SO much, i used tape like u did and i wish i could show u how perfect it is haha. Thank you SO much 💓

[@adobo_jollibee_hybrid1234]

I got PTSD by my ocd while applying a screen protector

[@jameswebb3932]

Excellent video and very informative step by step instructions. Thank you

[@Ptoki1]

5:57 is it normal to not see any of that air coming out after you just laid it? I installed mine and i've not seen a single bit of air come out, I don't have a single bubble either, it looks good but it looks too good and felt way too simple to be real...

[@sydneymarshall3204]

Finally had to find a vid after fighting the remaining protector I have to not have all these weird dirt specks under it. It makes me so mad. Broke down and ordered more. Better study up for the big test! The hinge is genius. Can’t believe I didn’t think of that in the battle of the screen protector today.

[@ronch550]

In my experience, alignment is easy, I don't have to use the 'hinge' technique here. It's getting the phone clean enough that's hard, especially if you're using plastic screen protectors where any dust particle will product an ugly bubble.

[@PeterWTaylor]

Very useful thanks. I used a spectacle wipe on the screen to make sure it was really clean and static free and proceeded as you described. It went on completely bubble free after couple of minor relifts at corners. There was still a trace bubble line round the edges but working my finger round the edges removed it. One hint to newbies, check which edge your tab is on. Mine was on the opposite side to this product so I had an 'Uhh! moment and had to put the hinge on the other side.

[@rickychan257]

1

[@Vivi_Strike]

I had to throw away my protector because i kept having to remove it to realign again after putting the case on. The protector lost its stickiness and bubbles formed. Make sure to follow this video AFTER putting the case on and the display is turned on. For edge to edge protectors though im unsure.

[@alessandrathornton9937]

.⅖q1qq933😅⁸

[@trainman1209]

What does all this even mean?

[@SolLunaTV]

Thank you very much. This has been very helpful. I just subbed.

[@margaretgosselink8535]

Could not have done it without you! Thanks