How To Install a Window with a Nailing Flange

[@HouseImprovements]

It has been pointed out that at the 18:13 mark I explained the sealing at the top of the window completely opposite of what it should be. The house wrap along the top should be the layer you see when done. Seal it to the membrane. Watch this video fro a better example. kzbin.info/www/bejne/mnSWkGOpp75jiNU

[@TripleVortex]

Your videos are the only ones that are calm, actually step by step and helpful, no ads, no ego. Thank you.

[@wyattlewis9104]

This is exactly what I needed to see. Thank you. Cheers.

[@HouseImprovements]

Thank you very much for the donation!

[@FMFMXRacer]

Why didn't I find this guy earlier!! Would have saved me a TON of time. Well done, sir.

[@compuw22c]

I just bought a house last year, I've always been fairly handy with electronics and cars, but little with home improvements. Your videos are great and a big help to people who want to see someone doing something right, and explaining it well as they go. Thanks again, you've been a huge help

[@misteraye]

Who would have thought you would have been handy with electronics and cars?

[@kylepark176]

Shannon you are the best. i have used your videos for years for several projects. thanks for making things easy to understand. you're the bomb!!!

[@2DelGuys]

Probably one of the very best "How To" videos I've ever seen.... Every detail with an explanation for each one. Thank you

[@robweaver707]

Thanks Shannon! Between this and your "how to frame in a window" video, you've shown me all I need to be successful in adding a window to the attic in my 80 year old farm house.

[@HouseImprovements]

+Rob Weaver Good luck

[@deannezerka3029]

This is THEE BEST video presentation I have ever watched. Nice lighting, can see wherever you point or are talking about, not dead time or windblowing on microphone. REALLY appreciated your presentation, process, products and concept. Gave me the courage to attempt 1 or 2 for my beginning experience. Trying to find how/where to buy less than 100 RedZone corner guards. I want to use THEM as you directed because you can cut them to size. Considered Lightening Flash corners, but trying to pursue Resisto RedZone corner guards. THanks for such a fine presentation. We novices can really learn and emmulate your "simple" process so clearly demonstrated.

[@TheAdamlans]

+Dean Nezerka I have seen techniques where instead of the corner guards, you just use the same peel and stick membrane- trim an 8 inch piece, and stick it at the bottom corners, folding half its width onto the sill, and the other half it's width onto the edge. You also have to overlap it 4 inches from the sill so that the other 4 inches stick out off of the exterior wall face. THEN you trim the membrane overlapping the wall face at a diagonal so that you can tightly fold it ONTO the wall face.

[@tongly7887]

Dean Nezerka the

[@jerrynmashie6785]

Dean Nezerka

[@missouriwaters]

Dean Nezerka ll,,LKK,l Ll.

[@hkhkhamidkarmadi9752]

Dean Nezerka ججهخحححجج

[@jimmylewis6070]

FANTASTIC!! Thanks for the great instructional video!! I cut a hole in the house & installed my first window following your instructions. So easy & simple when doing it right.

[@chofbrighton7014]

Appreciate the many helpful videos you have provided over the years. Detailed and easy to understand. Thank you!

[@grantbuckley2954]

Thanks Shannon. Great advice and very helpful for a beginner like me. I used your method on 3 windows I installed into a block wall shed after framing the openings. On the last 2 I added a metal drip flange above the window and covered the vertical part with another layer of sealing tape. Thanks again.

[@robmorin]

You make everything so easy to follow, I am building a small 16'x20' cabin up north and before I do stuff, install doors windows, insulation house wrap I first check your videos to help me do what I have to do. Keep up the great work !

[@Elioamerica]

i wached a lot videos about windows flashing, but this guy is the top one, this corners at the botton Wow is the best thing i see for this job 👍🏼👍🏼

[@osrr6422]

I'm finally replacing my windows (71 vintage) with new windows of this style. This is an excellent explanation of the process.

[@granitestatemike]

good job - i've been a contractor for 18 years and just installed 2 windows after not having done it for ten years. Your method is the same as mine although I used no silicone on the bottom flange. Great vid to reinforce I still remember things!

[@granitestatemike]

and you do a great presentation explaining why and how to those learning.

[@joelpeacock556]

granitestatemike i

[@lucaszhao3556]

granitestatemike. 7-"1

[@rsz90182]

Very nice job and simple explanation. Doesn't seem like rocket science.

[@franciscocruzjr5721]

Thanks for the complete concise instructions. You never disappoint!

[@rossturcotte3952]

Excellent. I just did the first three windows in my new construction, almost exactly as you did. The top is the only difference, though minor. You mentioned the house wrap laid down first, then the membrane applied. I layed the membrane first, overlapped with the housewrap. Then using tape, seal the wrap down. Just another flap of protection.

[@lynnglidewell7367]

Great information and demonstration. Slightly slanting the bottom board of your rough opening by 1/8 of an inch was a great idea. Water follows the path of least resistance so it's running off and down the siding rather then seeping and soaking in the wood. The membrane is an added protection to the wood. Not completely sealing the bottom part of the window with silicone bead is added protection just in case water should find a way behind the window it can still run back out. Very good video well explained.

[@HouseImprovements]

I'm glad you picked up on that! It's important to consider those details.

[@krugrdmegatron]

My partner and I are building our own house and are fairly clueless. Your videos have been a tremendous resource. Thank you!

[@HouseImprovements]

+Lawrence Fishburnt Thanks and good luck. if you have questions at times please use my forum.www.house-improvements.com/forums/

[@craigs247yardsale]

This is one of the best home improvement channels on KZbin!! Thanks Again!!

[@HouseImprovements]

Wow, thanks!

[@Maverickanddiana]

I have just taken the time to watch a few of these and this gentleman is one of the best teachers and the best quality videos for DIY that I've come across. It helps cities Canadian because he's speaking my language ;-). Thank you thank you thank you for taking the time to put these together. I have more confidence now in doing a project myself.

[@jamesknott610]

You just saved me over a $1000. DYi is where its at.

[@Pbs-xs4xk]

Yessir

[@Canosa612]

As always I find your videos very helpful. You’re great at explaining concepts and are extremely quality oriented. Thanks for taking the time to put together these great instructional videos.

[@gregkrizan5274]

Great video and straight forward. Replacing all windows in my house with these type of windows.

[@ethelbrodnax585]

Sure appreciate your time showing us the proper way to install a window. I watched this because I had windows installed and wanted to make sure it was done properly. Sure helped a lot having the knowledge. Thank you 😊

[@shadowrockcairns8390]

Good job! I was interested business 40 years. I can't believe how many builders get this wrong!

[@FiscalRangersFlorida]

Great video. You had many more protective steps than some other videos where they didn't check levels, didn't use the butyl flashing, etc.

[@brendalloyd8427]

I found your video very helpful…I’m a do it yourself woman and this was great…thanks👍

[@randygallier9982]

You’re great at explaining every little thing. Really appreciate your videos.

[@simomilosic7345]

Lot of respect to the man in the video. He knows his job and is very good at it. God bless you and your working hands for years on.

[@jarredpetroff6659]

You're the original Master Chief (117), and you've got a cross symbol?! Who are you?! A new friend?

[@Anotherdaynparadise]

this guy aint fukin around! quality work is not expensive, its priceless. thanks for these great videos. im ready to hit a home run now with my repairs.

[@Rottingboards]

I use a little tape to hold the bottom shim blocks. Great video.

[@peterthetrunk]

Thanks for the short and precise instructions (no blah blah blah as so many others)

[@21gonza21]

The corner protectors would seal better if you install them after the flashing, and on your bottom flashing, if you don’t have house wrap yet if you don’t peel off the paper and just throw a couple staples and when you do install house wrap you are able to lift the flashing and tape it over the house wrap, thanks for the videos!

[@EmmanuelMoochet]

Thanks for dedicating your time and yourself for me. I appreciated for everything you have done. God bless.

[@dravidianlabs5007]

This is exactly what I wanted to see. Great video, very detailed, clear, price and nice pace to it. Appreciate it for documenting and sharing!!!. You earned a subscriber!!!

[@ganoiwausa5943]

I don’t understand how would anyone disliked this video !! Great help thanks.

[@thomasfamily-c1g]

Good job I learn a lot this morning. Tomorrow I will be putting my skills to work. Thank, Thank

[@hunnymadedesign]

This guy knows his stuff

[@dancingbutterfly3494]

Thanks for posting this great video, lots of people post but don't take the time to explain the way you do.

[@PastorManningPhD]

Beautiful work, I added a dozen of these vids to my favorites, making our dream house perfect. thank you Shannon!

[@allentaylor7772]

Very good presentation very well explained and very good visual camera work would recommend these to anybody

[@MargaretWorkmanWarponie-art]

This is just what I needed! Thank you for taking the time!

[@trevor5290]

Love your videos Shannon! I'm on your forum as well and find it very helpful. Can't believe you have to time to answer all the questions you get on the forums a busy as you are. Old adage.."if you want it done right.. ask a busy man to do it" ;)

[@macsnac]

Thank you for the fine, well presented demo. It helped me a lot. I’m doing my first window replacement. I’m sure I’ll be back. Rob Scott

[@beenbadChad]

Genius with the sloping silicone.

[@philliptaylor5981]

Yeah, hands down best videos for the "real" homeowner!

[@HouseImprovements]

Appreciate that

[@philliptaylor5981]

@@HouseImprovements I've watched you for years and you've helped me on countless DIY projects. Whether it was working on a heater system, soldering, and now door installation you've got the touch, man! Thank you very much!

[@guidosartucci3316]

I enjoy watching someone doing it right! Why didn't you use truss head screws, as you did in other videos? Do you have a preference? Why? Thank you for your time and consideration for others!

[@HouseImprovements]

I prefer shingle nails with a nailing flange because the heads to not inter fear with the siding or finish as much as a truss head does.

[@pickleball_tomorrow]

Hey Shannon! Appreciate the videos very much. At the 18:20 mark you mentioned having the house wrap down then the adhesive paper over the top of that. Not sure if i am understanding that part correctly. Thank you so much for the help with your great videos!!

[@HouseImprovements]

please come to our forum and we can help you with questionswww.house-improvements.com/forums/

[@pickleball_tomorrow]

@@HouseImprovements i just joined last night!

[@chrispaschall5507]

Good point about not taking the housewrap into the sides of the opening.

[@icyfountain9428]

Always enjoy Shannon's videos

[@yesica0330]

Awesome video!Now to convince my husband that he can make our kitchen window smaller 😅

[@laradjilaredj6036]

This is THEE BEST video presentation I have ever watched

[@truenorthmuskoka9077]

Great video. Thx for pointing out that some windows have a built in J channel. I didnt know that. Im going to be installing a similar window and siding n my shed so the timing of your video was perfect.

[@truenorthmuskoka9077]

Seems that my shed window will take longer than normal to be delivered due to Covid. I wonder if its ok to install my soffits and fascia before installing the siding. Then I would butt the siding up to the fascia using a finish trim. This will allow me to get some work done while waiting for my window. My original plan was to install the siding first then install the fascia J trim over top. Any suggestions or recommendations.

[@alonzowallace6649]

The video was very great. Well explained ,very thorough and you took your time. Could understand everything you said and easy to follow. Great job.

[@HouseImprovements]

Thanks for the great feed back

[@jancarloc2459]

This guy is very legit .. great job .

[@Pmagmaster]

Your the man I always love your videos I'm looking to have to resheet outside of a enclosed porch with new windows drywall an wireing an this is super helpful I love your work guy an videos

[@HouseImprovements]

Go for it!

[@Pmagmaster]

Awesome thank you sir

[@maryn2289]

Thank you so much for sharing your knowledge with us. The video was very helpful, full of information and very step by step detailed.

[@keemahkeemah5514]

I am planning to replace single glazed windows in my house. How do I measure the olde windows they are in the brick wall outside side. Can you please post some guidance on that part. I do watch the program you post time permitted. I will appreciate it Thank you 🙏🏻

[@vivgleeson8057]

In review..... membrane goes over or under the house wrap? For a renovation purpose.

[@markarita3]

18:13 I'm confused. You say, if you had house wrap, you would bring the flap down (and staple it), then apply the membrane over it. But on your other window install video (Sep. 04/12) at 20:00 - where you actually do have house wrap, you apply the membrane first, then the house wrap flap over it (then tape it). Which is what I thought it should be. Which is it?

[@HouseImprovements]

Hmm you are completely correct , I said that wrong here.

[@markarita3]

@@HouseImprovements Ok, good to know I'm not losing my mind! lol

[@matthewwindisch9449]

Thank you, going to attempt installing a 2x2 window myself... Excellent explanation of the installation!

[@ArkhamArrow]

I replacing a window currently with nailing fin and confused. What window dimensions will I buy to fit my opening properly with the flange? My opening is 36x54

[@HouseImprovements]

I would purchase 35x 53 , but no larger than 35-1/2 x 53-1/2.

[@tttarms1970]

Shannon rocks....PERIOD

[@redstingraycorvette]

I have watched about seven of these installation videos on KZbin now and this is the first video I've seen that no tape was put down both sides of the window before the window was installed on the rough opening

[@HouseImprovements]

With a window with a nailing flange the tape on sides and top are done after the install.

[@redstingraycorvette]

HouseImprovements okay that sounds good I think you're still pans probably better than anybody else I've seen them great video

[@christopherd6399]

Fantastic video! I feel ready to install my first flange window, which will be done within the hour! Thanks!

[@kringles65]

Excellent teacher. Thanks from a beginner.

[@faraza8868]

Do you need to use the window insulation foam that goes into the side of the window and expands? I saw a bottle of that home depot and wasn't sure if I should use that

[@HouseImprovements]

Yes you want to use "low expansion" spray foam to insulate between the framing and the window jambs.

[@Hsinkuang]

Nice video , but I still not clear where to stop the house wrap. Do you have video talking about that ?

[@remorgan8280]

Hello Shannon, Always I really do very much spiritually appreciated your tutorial DIY projects. I couldn't find someone to installed 5 windows downstairs without trying to rob me without a pistol. So DIY came into play. Your windows are the same that I purchased from a window wholesaler that saved me quite a bit of money. Champion was attempting to charge me over 5 grand for these windows. Instead of using nails I decided to utilize construction screws which in my opinion has better holding power. I don't have any membrane material or the corner plastic I saw in your video. I am going to home depot to purchase them. The replacement windows are double-paned and let down on the inside. I love them. The old windows are one pane and not energy appropriated. Once again Shannon keep up good work and I will continue to watch your tutorial videos. Hey, do you have a video on removal and installation of a fireplace? Take care of yourself and family. Be safe and practice social distance. Peace and Love In Yahshua Messiah, RE Morgan

[@HouseImprovements]

Thanks for your comments. I'm sorry I do not have any fireplace related videos at this time.

[@uriel0002]

Excellent video I wanted to see how you close the around the edges 👌

[@robertboeckmann1111]

Great job! Thank you so being so thorough and keeping the pace reasonable for compression. Subscribing 🙂

[@HouseImprovements]

Thanks for the sub!

[@jamesshoffner409]

Good video & good instructor. Detailed instructions, & new materials.

[@RyanTitcomb]

Just bought some of the Resisto membrane the other day for some windows I was installing, noticed it now has a plastic backing instead of the brown paper which is nice because it comes off clean without ripping.

[@danebradley9246]

Dupont makes a peel and stick tape that uses butyl instead of asphalt based adhesive. Always check for comparability. One complaint above was silicone cracking. With asphalt based peel and stick the silicone never sets up correctly. It's on the label. Also eliminates need for primer.

[@mikeahmadi3395]

Great instructional video. Thank you.

[@lindafinney]

Great presentation! Now I see why all of my new windows leak so bad~ the carpenters did none of this! I have a huge mess now. All but 3 windows in my house leak so bad!

[@mikecorbin8081]

Here's a tip for anyone reading comments, don't use a level. Let me now clarify. In the case of this window installation, where it appears to be approx. 6 inches from the soffit, a level window may not actually follow the long horizontal line of the soffit. This can make the window appear to be tilted when viewed from outside of the home. I use to install siding and ran into this issue many times. Aesthetically, you want to the window to "appear" level, not necessarily be level. Being that the long line of the soffit is very close to the window, I would use it as the reference to measure from, making each side of the window the exact distance down from the soffit. Inside the home you needn't worry so much about it as distances from the ceiling can be "corrected" visually with the trim that is installed around the window, giving the appearance of a level window. A window with no close horizontal references (in the middle a large wall with a gabled roof for example) I would certainly use a level. Obviously, discretion must be left to the installer. This is just my experience. As a note, if both sides of the window are the same distance from the soffit, it makes the siding piece that goes over the window easier to rip for installation as well. One more thing, I was always told to use 16 brights for installation (nails) for their grip strength on door and window installations. You don't want your nails backing out. I'm not sure if that's code, or just my inspectors preference, but tiny roofing nails would be frowned upon in my neck of the woods. Nicely done otherwise, and I appreciate the effort made for a quality video!

[@danebradley9246]

If you don't level your window it can be inoperable. When the sill is out of level that bad you should adjust with shims (if space allows) or call a pro to do some minimally invasive framing work.

[@chaddts]

Or have level soffit...if doing it yourself.

[@paovang1548]

You are correct. I did use a level and after going outside to look the window is off even though it's level.

[@robburkhard9256]

I agree with everything you said except for the roofing nails. I've pulled out plenty of windows that were a giant pain in the ass to pull out that used 1½" roofing nails. Also, if the depth/ throat of the window is not as thick as the wall it's better to make sure your reveal on the inside is even rather than making sure it's level

[@prestonball4982]

My company installed for three Lowes stores for 27 years. It sucks when something like a soffit made a level window look crooked. We always choose to level and plumb our installs, usually with a laser on tripod. Seems like overkill but if there was ever an issue the manufacturer reps would throw us under the bus if it was a fraction out of level. Most of our installs were impact single hung that didn’t allow any grace to work correctly. Choose your battles.

[@denise7453]

Thank you so much. This really helps.

[@DHodges187]

I have 2 widnows nailed in behnd stucco. I am going to attempt th easiest one first. When attempting to get a couple estimates on 2 windows I need right now. Both as naied behind stucco, so I guess I am confused on how to measure it. Thank you for any help..... Im using your exterior garage door video also. you rock and are ery helpful.

[@Awolverin3]

Thank you 🎉you’re a great instructor

[@edwardmcdonald1741]

very good demo for Windows

[@tryxlr8m8]

Thanks! This has been real helpful as about to go install a window right now. House wrap is on so appreciate you mentioning those extra tips!

[@joew7274]

Do you only have to flash the sides after i saw another video were the put the side flashing on before the window was in

[@thomasgaffney5752]

Great video answers a lot of questions on freeze wrap

[@HouseImprovements]

+THomas Gaffney great!

[@xngdestini]

A video on the inside would be amazing shannon

[@HouseImprovements]

Check out some of my other videos, you will find at least two that deal with the inside view and insulating.

[@sylvester197929]

Hello, thanks for the video, I'm wondering though, once the smaller window is in, how do I match the exterior vinyl covering so it is seemless with the rest of the house? Do you have a video about that? Thanks in advance

[@Brandon-no3vc]

How hard is it to remove that membrane when replacing the window?

[@andy347]

I would like to see how you are going to tie in the siding here...

[@lourak613]

Isn't it possible for water running down the stud to get behind the corner guard? Would you recommend possibly throwing a small bead of caulk at the top of the guard?

[@FrederVision]

So shims on top of the flashing? What keeps the shims from rubbing thru over the years from expansion and contraction?

[@HouseImprovements]

I think you are over thinking this.

[@OmarMartinez-wh2xl]

Very nice video, Thank you !!

[@kar15bigdog]

The spray u used also work in metal? Like mobile home?? What kind was it?

[@HouseImprovements]

I think it would work on metal. It is a primer made for these membranes. I believe that one was made by "Henry Blue Skin"

[@kar15bigdog]

@@HouseImprovements thank you

[@rodrigomartinez4895]

You're awesome thank you! Looking to replace my door with a fixed or double hung window, this is going to help alot!

[@jesusortiz6842]

You went to school to learn all this. You are profesional .

[@davidholper7343]

Where do I order the plastic corners and the waterproofing with the sticky backing. I went to my local hardware store where I had purchased my windows and they did not have anything like that

[@HouseImprovements]

Resisto is the brand used in video . Rona carries them here.

[@jonathansoto7252]

How can I make the widow trim with one side larger than the other ?

[@debradevine3949]

Gheeze looks easy from the outside. Unfortunately I have a wall that I cannot access from the outside. How can I install this type of window from the inside????

[@HouseImprovements]

Not easily. We can help you in the forum if you want to come there. www.house-improvements.com/forums/

[@jonathonfrederick2062]

It is a good sill but it is important to lap the membrane over the house wrap below and onto the sides as well.