Thank you guys for this concise/cut to the chase video. I am saving it for reference.
@azul88118 жыл бұрын
In my entire life, I can not recall having ever seen a garage that looked quite this one!
@cd4498 Жыл бұрын
The problem i had was the aluminum screen tearing/ cutting as i was installing the cord with the roller. It took me a few trys and wasted screen before i got one that came out decent.
@km-my4un7 жыл бұрын
This instructed me on how to do this myself. Thanks
@KirkMarston-k4o2 ай бұрын
Excellent presentation; but you should mention that spline comes in at least 3 thicknesses. On my first attempt I wound up trying to pound an oversized spline into the groove using a hammer.
@dupree462 жыл бұрын
We grew up with metal screens in our windows. We never had to replace them and they kept insects out. They also protected the windows when we cut grass and kicked a rock against the screens. They creased but did not break. Unlike the nylon mesh screens. All you have to do is look at them wrong and they have holes. My dad replaced all of his windows and they came with nylon screens. He swapped them for aluminum mesh. Say what you will buy aluminum mesh will still be standing when the nylon has fallen apart. With anything when you assemble it you have to be careful not to damage it. The first few you do may not turn out as well. But after you do 12 or 13 you become a expert! Great vid and glad some one is showing aluminum screens some love!
@marcinose7 жыл бұрын
Nice, clear, and succint. Great job ADFRS, whoever you are.
@youmayfeel4 жыл бұрын
Is there any machine available to cut the aluminium mesh instead of the knife? if i want to start this job as my main job it is not that easy using knife . please help me.
@SuffolkD10 жыл бұрын
Good instructional video.
@majedhejazi72497 жыл бұрын
thanks
@zion56376 жыл бұрын
What was the duct tape for?
@jrandyjr6 жыл бұрын
The duct tape can be used to hold the screen frame to the table so that I will not move when installing the spline.
@stargazeronesixseven3 жыл бұрын
To shut up unappreciative & nasty audiences! 🕯
@raspyni9 жыл бұрын
I thought the paper towel was for the blood you'll release when you happen to touch the stray edge of that aluminum screen.
@saravanansaravanan.95876 жыл бұрын
Barry Friedman
@rameshgollapalli56709 жыл бұрын
we want the tools like rooler and ss mesh cutter pls give me replay
@ramhansaluminummaster28 күн бұрын
Good
@lebronjameslol35214 жыл бұрын
that was amazing
@chinaXAweavingmachine2 жыл бұрын
Hello , we manufacture aluminum wire and stainless steel wire screen window looms, the machine has high output, easy operation and long warranty period, you can browse our youtube homepage.
@undertaker666dead10 жыл бұрын
step 1 grab a beer step 2 open the beer step 3 drink the beer step 4 repeat the first three steps
@moonshinemusclecar25767 жыл бұрын
You forgot the step about applying insect repellant to your body before commencement of beer consumption.
@patfino58576 жыл бұрын
undertaker666dead lololllplo
@AjmaLkhan-oc3bl3 жыл бұрын
Hi
@mahaveersingh-cg8bu7 жыл бұрын
sandar
@knowl986 жыл бұрын
prabhunarayan
@enternamehere65745 жыл бұрын
Prabhu Narayan tunak tun
@johnathanfabela58432 жыл бұрын
I like using aluminum screens for the simple fact you can recycle them. As the Black plastic or whatever you may call them are non recyclable. Think of our future and not for yourself.
@TheRmm19764 жыл бұрын
Use fiberglass, not aluminum screen. The aluminum is maddening to work with and you'll be pricking your fingers so get ready with the paper towels!
@joshdelgado73554 жыл бұрын
I agree, fiberglass is esier to work with.
@cyberyogicowindler24482 жыл бұрын
Aluminium flyscreen helps to protect you from pulsed microwave EMF when there is a mobile radio mast in front of your window.
@VeXxit2 жыл бұрын
@@cyberyogicowindler2448 bruh shut up
@garyreid32456 жыл бұрын
Mitre cut the screen, then trim it as close the the outer edge of the track as possible. roll in the mesh on one side first, dont try and to it with the spline the spline comes later. Also you need to stop the screen from moving, I use clamps at the top and bottom to hold mesh into position. this technique shown here works fine with little screens, but when you have to do a door it wont work at all. I cut the mesh to about 3 mm excess on the outer track, then mitre the corners. Roll in top and bottom of the door with mesh then add spline. Never try to roll in the spline like this. It wont work for larger windows or doors. If you add too much tension it will pull in like an hour glass shape and wont fit. Do about 300 a day of all sorts. Give this video about a 2/10 as it doesnt explain about the tension nor the tearing effect.
@christinesforza86004 жыл бұрын
Thank you, Gary Reid. I have a door screen that has part of one side which has torn away from the frame, but the entire screen surface is undamaged.Is there a way to apply enough tension to the screen to get it to move over and be re-rolled into the groove?
@erikasaum93054 жыл бұрын
You are absolutely correct. I started laughing in the very beginning with all the tools. That rag is needed for the blood and sweat that are going to go into doing this.
@johnbclements4 жыл бұрын
This job is very difficult, and there are a lot of things that can go wrong. I discovered how easy it is to tear the aluminum screen while creasing it, and how hard it is to keep the screen straight in the process. The end result looks appalling. These instructions also breezily refer to "tensioning" the screen without providing any details on how it might work. I find this video to be disappointing and misleading.
@GenMinion9 жыл бұрын
In case you're not rich or don't have the time for the proper tools: 1) Get any old roll of screen that will fit your frame. 2)Carefully use a Flathead screwdriver to indent the screen into the frame's groove, careful not to damage the screen. 3) Reuse the old rubber strip if it's still in 1 long piece. 4) Use a rounded tool , for me it was the back end of an adjustable wrench, to press the rubber strip back into the grooves.
@1CaptainJimmy14 жыл бұрын
tool cost $2, buy it.
@mrcleanbincleaner40477 жыл бұрын
VERY WELL PRESENTED.
@MrTarkus0079 жыл бұрын
the only thing with aluminium screens for installers is that if you miss your shot your screwed cause it's not as forgiving as fiberglass cause aluminium will crease & will show !
@pyrofful6 жыл бұрын
Exactly.....been there.
@vernonsteinkamp10882 жыл бұрын
I went to Lowe's for some aluminum screen and the size I needed (all 3 rolls) were crushed in the middle, basically unusable. The employee seemed to care less. I stopped going to Lowe's for reasons like this.
@أمةالرحمنموسى4 жыл бұрын
Thanks a lot 👍 I recommend for you sites, pages or channels for the following: Dr. Bilal Philips, Yusuf Estes, The Deen Show, Nouman Ali Khan, Dr. Zakir Naik 👍👍👍
@mohammadsaqer9838 Жыл бұрын
ززم
@Andrew-Comi Жыл бұрын
what do you do if your screen window does not have a "spline"? My Anderson windows all have metal screens that just dissappear into the frame.
@paulmvn54313 жыл бұрын
These stupid aluminum screens have convinced me to throw the frames in the trash and leave the windows closed.
@claychandler34686 жыл бұрын
hahaha that's funny that job is not that easy I'm doing these kind of things for years and it takes a certain type of skill do that within reason but it is not an easy job replacing strings like this guy is showing it no no no
@carcin87692 жыл бұрын
For starters he rolled it out wrong putting little dents where he put his hand
@kanizfatima75433 жыл бұрын
Which scissor you used for cutting mesh tell me the name please
@rallyral40810 жыл бұрын
simple and to the point
@أمةالرحمنموسى4 жыл бұрын
I agree with you 👍 I recommend for you sites, pages or channels for the following: Dr. Bilal Philips, Yusuf Estes, The Deen Show, Nouman Ali Khan, Dr. Zakir Naik 👍👍👍
@sanju-ex1uo5 жыл бұрын
Muje b bula lo apne pass mai b aluminium ka kam karta hu
@gangofpour8 жыл бұрын
Not all spline is the same size. Take the old one with you so that you are buying the correct size.
@pardeepjangir71736 жыл бұрын
Sr window screens frem kis nam se milgi
@pyrofful6 жыл бұрын
Spell check? You no make sense
@carlojohnmagayanes95582 жыл бұрын
May i know what size of the frame?
@jaydenritchie63513 жыл бұрын
How to defeat a taser
@rajeshfurniture19542 жыл бұрын
👍
@ngocphuong912 жыл бұрын
Great
@cherylherndon1156 жыл бұрын
what about fabric screening material?
@pyrofful6 жыл бұрын
You can get typical fiberglass or aluminum screen.....or even copper mixed with another metal screen. You can get super fine screen for small no-see-ums or normal sized screen for most common sized insects. The choice is yours. The metal screen tend to give longer life and tougher if they get bumped but if it's not in a high traffic area and not getting a lot of sun light you can go for fiberglass. Even if it is in direct sun light it should still last many years as long as no one is pushing it or hitting it with sharp objects. Feel free to google search it for more answers and in-depth. That's what I did to answer your question. I know very little about this type of thing lol.
@فيصلالمريسي-ش9ر6 жыл бұрын
عجيب الاعتماد على النفس
@jovantrajkovic35187 жыл бұрын
izrada mreze za komarce
@rupeshmaharjan26048 жыл бұрын
it's to good
@sachinbhaiskr29356 жыл бұрын
How much is the cost of screen
@pyrofful6 жыл бұрын
Depends on the kind if you want a fancy no-see-um mesh screen they run $25+ depending on length and with but for your typical screen it can be cheaper. Do a Google search and you will see the prices lol.
@Roller765 жыл бұрын
So you can watch a KZbin video but you can't look up how much screen costs?
@jeaniechampagne88313 жыл бұрын
So how do you go about trimming the excess aluminum that magically peels away as seen in your video?
@stargazeronesixseven3 жыл бұрын
Great ideas indeed! Thank You So Much for the Efforts & for Sharing! Stay Safe & World Peace! 🌍🌷🕊
@timothybennett34736 жыл бұрын
Not much for details, is he? What about pressing the spline into the corners? I guess we should feel honored that he bothered to mention the wrinkles.
@Murshd-yx4fe4 жыл бұрын
Thanx Alot My dear.
@merlinja78345 жыл бұрын
Well said..... appreciation
@SidecarBob7 жыл бұрын
"Flat head" refers to a screw with a tapered head that is flush with the surface when installed. Flat head screws can be driven with slot, crosspoint (Phillips or similar), Robertson or even Allen drivers as applicable. You are using a slot screwdriver.