How To Install An Automatic Door Closer Ace Hardware Pneumatic Door Closer

Door always blowing open? Here's how to install an automatic door closer step by step. We fit the low cost Ace Hardware Pneumatic Door Closer
Like it? Then SUBSCRIBE & HIT THE BELL - / @thisisreallife
• How To Install An Auto...

[@michaelh710]

Right! Good video! When the door is open to the position that you want, just slide the door stop "washer" all the way up to the piston case and then release the door. The door will start to close about 1/2 inch, pinch the "washer" upright against the rod, and the door will stay in that position. Good luck.

[@mijunhong1]

Just what I needed. Thank you so much!

[@rumpstatefiasco]

I too am owned by a cat. You sir, Rule; Thank you for the excellent tutorial!

[@saraf7664]

Thanks a lot!! Instructions on the package were not clear, this is my first time installing a door stopper also for my cat🥺😂, glad i found this video

[@miker3640]

Great vid, thank you for posting. to keep the door propped open, when the door is open simply slide that funky, bent metal piece up to canister and when the door tries to close that funky, bent metal piece keeps the rod from entering the canister.

[@ThisisRealLife]

Mike you are a star! the instructions were a 'bit vague' on that bit, most of the time I just need it to shut but tried what you said and it works! Many thanks for the value added post!

[@SA-mu8hk]

Thanks that helped. And the washer "little bracket"at the left works by holding the door open and then slide the washer forward to hold the door open

[@Babyjohn8170]

Awesome job! I feel as if I can fix my door today, because of your clear and precise instructions.😊👍

[@tillyfreeman5192]

I hit the like video of course! Thanks for sharing and helping a woman like me who has to rely on herself lol

[@tillyfreeman5192]

I love KZbin!!!! haha thank you, mate! I have the same door closer in bronze and getting ready to install and the instructions that came with it do not explain all the details like how to adjust the pressure of the pneumatic system (inside the tube) to make the door close gently, I have cats too! Thank you thank you thank you thank you

[@shroommakeyourbasegoboom5901]

10/10 answered all of my questions. I like to think he never did figure out the open setting. HAHA

[@CirceIsland]

Thanks for the video. I'm a first time lady home owner learning to fix things around the house. This video saved my bacon and money I would have spent asking a neighbor to help.

[@oldguysrock2170]

Great video. Your demonstration was far clearer than the multi language poorly drawn instructions. 👍🍺🍺🍺

[@tillyfreeman5192]

I know right!!!! His video is the best!

[@brianrogers1375]

Bought a different brand but you’re video explained the installation perfect. The instructions provided weren’t very clear

[@johnnyz7752]

Nice job, except for one thing. You screwed the bracket on the door backwards. Most of the bracket should be behind the pneumatic arm. It works either way, but this way the bracket is hidden.

[@carpathianken]

Now that you mention it, it would blend in better & look more aesthetically pleasing to have that right hand part of the door opening bracket hidden in behind the pneumatic arm

[@tillyfreeman5192]

Thanks will keep this in mind, I’m about to install mine

[@FromNoobToPro]

Thank you for taking the time to type and post this with no benefit to you. Need more people like this

[@chloethecatkitchen2546]

Thanks, my dog can't escape from the front door 😄😁

[@user-ib3gf9il8f]

Great vid 👍

[@ernestgoble8825]

Great Video mate ! I am thinking about installing one of these units on my metal security door . I have a teenager who loves to leave the door wide open every time he leaves the house with his mates . It’s about to drive me mad 😡 .

[@ThisisRealLife]

Go for it! I was worried about my daughter leaving it open and letting the cat loose in my garage!

[@daviddave8266]

@@ThisisRealLife what about drlling screws in pressure closer with existing holes for screws or should I make new ones

[@nozrulislam5736]

Thanks. God bless you 🙏

[@moelive1976]

Thank you very much. Your instructions really helped.

[@AmataSora]

Useful info to fix our new door

[@CurtisBenjaminIsrael4453]

Such simple, precise instructions. Thank you.

[@lucast3006]

Your accent makes the video very nice, as well.

[@wwhb4780]

Makes it very clear to understand. As English is not my mother language, I set the speed at 75 Percent.

[@criticalgamerx]

Thanks mate . I installed mine today.

[@minwiralshamiri887]

I was expecting that

[@whitetiger49]

Thank you.

[@user-kc2ef6gj6l]

Thank you!!

[@markzap5131]

Thanks!

[@bodzchuidian5836]

Thanks for the vid! Saw an old automatic door closer here. Saw this first. Watched it and able to install the door closer. Also saw your fishing gears!!! Angler here haha

[@ThisisRealLife]

Glad it helped!

[@moisesalvarado7703]

Thank you

[@M3GAN3116]

Thanks 👍

[@clarissalaguna2886]

Thanks for this video. So easy to understand and follow. Have you figured out how to use the small bracket thingy? I think if we want to hold the door open, we have to manual move the bracket? Just guessing. 😆

[@tellurye]

Yes, that is correct. Its pretty cool, especially if you are carrying groceries etc. into the house and the door keeps closing. Open the door, and with the one hand holding the door open, use your other hand to move that metal bracket holder snug up to the base of the closer. Remove your hand and the door will attempt to close, but will be blocked by the holder. When done, simply push open the door a little to free the holder, with your other hand slide the bracket back to the end, then when you let go of the door, it will go back to closing on its own.

[@shakeelsaifibadkhalfridaba6790]

Thanks bro 🇮🇳

[@liliLB]

do you think it can let go and fall on your head?

[@wwhb4780]

Better wear a hat 😅

[@ralphperez9298]

Hi there, i only have a door handle (those long ones) with no knobs and the wind keeps slamming my door. Will installing a door closer help me even if i dont have a knob?

[@GandalfPassing]

great tutorial, worked well

[@swilsonmc2]

They have ACE Hardware in the UK?

[@ernestgoble8825]

Great video mate 🔧

[@ThisisRealLife]

Glad it was helpful! When I shot this I wasn't sure if there'd be interest but judging by the views I did something right!

[@deemanz4153]

Lovely!

[@jacklero1289]

Thank you sir that was nice & easy installment😎

[@ThisisRealLife]

Glad you liked it

[@erichanastacio9695]

A relative of mine has a similar door closer but the cylinder was damaged (a big long gaping hole / oblong hole) on one side. The hole was caused by the mechanism inside the cylinder. They were already contemplating on buying a new one. Instead of buying outright, I taped two big popsicle sticks (side by side) on the outside of the cylinder to plug the hole. It's been three years now and they're still using my repaired version.

[@ThisisRealLife]

just shows ingenuity comes from everyday objects! Thanks for the top!

[@erichanastacio9695]

@@ThisisRealLife You can blame MacGyver tv show for this. Love to watch it ages ago 😊

[@tillyfreeman5192]

Just get the a $10 dollar door closer from Amazon! Same as this one

[@sophieclarke02]

Do you think you can use this contraption on a sliding glass patio door?

[@tellurye]

That's a good question. Technically yes, but youll probably hate it. The range is very small so the sliding door would only open like 6 inches. It works on regular swinging doors cause as you can tell the bar doesnt have to move that much. You would have to see if they make ones specifically for sliding doors.

[@onjofilms]

That's the on problem with new kitty kats. They wonder outside.

[@priceandpride]

New kitty cat

[@sbomorse]

Shame it closes forcefully at the very last part of travel.

[@DawGGG85]

Move the bracket on the door 1-2cm away from the pump.

[@markdietrich5172]

Working in the shadows not helpful

[@user-Daefzoze]

👏👏👏👍🇸🇦🇺🇸👍👏👏👏

[@RioBravoUSA]

Shaking hands dude!!! Talk to much....

[@0119shahid]

Thanks 👍

[@ladyt2588]

My screw isn't coming out to adjust the speed which is the while point of the mechanism. How is yours sliding right out?

[@Naturelover00023]

Thank you

[@wronggg]

Thank you