How to Install Artika Edwin LED Ceiling Fan from Costco

Today Steph is installing the Artika Edwin LED Ceiling Fan Chandelier. This is an enclosed blade fan with integrated LED which provides 50,000 hours of illumination.
📝 Sign up for our free weekly newsletter: bit.ly/1Oel7E1
🧰 Here’s a full list of the products we used: bit.ly/mdpfan2
🪭 Watch our past videos on enclosed ceiling fans:
• How to Install an Encl...
• How to Clean Blades on...
• The Perfect Ceiling Fa...
⏳ Chapters
00:00 Introduction
00:43 How to Remove Existing Ceiling Fan
01:09 Install 4in Ceiling Fan Support Box (Pancake)
02:20 Prep New Ceiling Fan for Install
02:57 Wire Fan with Wago Connectors
04:03 How to Use a Ceiling Fan Remote
04:34 Light Leakage Issue from Ceiling Fan
05:13 What We Learned
📺 This video is professionally closed captioned.
Visit www.motherdaughterprojects.com to learn more.
📸 Instagram: / motherdaughterprojects
📓 Facebook: / motherdaughterprojects
💻 Check out Steph's 2nd KZbin channel: bit.ly/hiimsteph
📖 Buy Steph’s memoir "Discovering My Scars": dospod.us/buybook
🛠 Products we use (affiliate links): www.amazon.com/shop/motherdau...
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. Safety first!
When you purchase products through links on our page, we may receive a small commission at no additional cost to you.

[@MotherDaughterProjectsDIY]

Have you installed a ceiling fan before?

[@jessicalang1882]

Can this fan be installed without the down rod?

[@1empyre1life]

No, may try this one since it's on sale now

[@jamestran9143]

Thank you for the video, i will install mine tomorrow.

[@terryp6970]

Cool ceiling fan. I had one installed today and I love it.

[@DavidGillies-ky7ch]

If only it had a cool white setting it would have been perfect. I have it but somethings got to give I hate the yellow glow.

[@Cash4Fruit]

Thanks ladies! I got it done 💪🏼 directions were perfect!

[@jerrygonzalez5529]

Does the instructions opt for a flush mount? I have a tiny house and this would be cool if flush mount is an option. Thank you in advance.

[@Hawaiiansurfa]

Hi, are you able to flush this fan closer to the ceiling?

[@Pottsburg]

Do you have to use the down rode? I have a Murphy bed and I’m worried about it hanging too low where the bed hits it.

[@Being_Joe]

On sale at Costco right now and considering this for my closet. I currently have a florescent bulb and it ugly.

[@mrDmastr19]

Will it work on a sloped ceiling ?

[@thomasehutton]

A few questions. Does the downrod have the ability to be on an angle? Could it go on a sloped ceiling? How long is the power cord and the downrod as shipped? How long of a downrod could one use without an issue? (1 ft?) -- Thanks

[@Thegodofsticks]

Our remote stopped working. Its got 🔋 s but not sure whats wrong with it. Anyone else run in to the same issue?

[@wildfrisco]

Besides brightness, can you change the color temperature of the light (warm/neutral/cold)?

[@MotherDaughterProjectsDIY]

no

[@marjoriemoyano2316]

Hello! Great video, i just purchased this fan and Im trying to install it, but I am not sure how to wire it. I have a black, red and white coming out of the ceiling, but only two wires (white and black) coming out of the fan, not sure how to put it together

[@kennie6516]

In the US there is usually a hot, common, and ground wire. I'm used to green being the ground wire. So one of those I would guess is going to be ground. I would find a friend that knows about electrical wiring or hire an electrician if you are not sure so you don't create a fire hazard. The ground wire usually just screws to a metal connection somewhere on the fan assembly. It would be very bad if you did that with the wrong cable though.

[@kylet3589]

Is the light controlled from 2 separate switches? That might explain the red wire...might need to get help from someone

[@JulieThompson38]

Are you able to control it from the wall switch as well?

[@MotherDaughterProjectsDIY]

Yes, you can still turn off and on the light but you would need the switch to stay in the on position to use the controller.

[@fallguy4209]

149.99 now

[@optimanish]

Great Video, step-by-step installation, pretty helpful. Thanks. Do you know if this fan is good for the living space or a large size room like 15'X15'? And is it too loud for a TV room or a living room?

[@vijayragoonansingh1110]

How is the wind output from the fan? Do you know the CFM rating?

[@JustRollin]

I think it's just over 1k

[@kennie6516]

Anyone know the color temperature of the light? I hate that they don't post that.

[@MotherDaughterProjectsDIY]

I believe it's 3000K warm white color temperature (I saw it on the product page on Home Depot's website)

[@herberthpanameno167]

Can it be used without the down rod?

[@shivamgandhi5779]

No

[@stevenlangton]

Can it be installed if there's no electrical box in the ceiling because it's made of concrete?

[@hans_hans]

is it worth to have this or its just another fancy fan???

[@MotherDaughterProjectsDIY]

I like this one much better than the old fan. It has a cleaner look and more fan and light options.

[@keska01]

I have this light fixture and the quality isn’t very good :-(

[@Neocodex]

Same. I just installed it and noticed one found that one of the 3 arms is crooked and bent, making the whole fixture crooked. It's dollar store plastic for $200. Avoid this trash

[@BrandonSchram]

Anyone know how to pair a second remote? I have two remotes, one from another fan that's broke. Can it be paired?

[@PolishedAudio]

Great video. Terrible light fixture. 😂 Just bought and installed. The only reason I didn’t return it is because it’s already installed and not worth the hassle

[@keska01]

what's so bad about it?

[@TheRealNewWhirledOrder]

What's wrong with it?

[@sonnyg3375]

Just installed one for my mother, my only issue is the rod isnt fully mountable so if someone were to bump into it, it can easily become unleveled or moved out of place.

[@alantong9770]

@@sonnyg3375 The rod connection is not rigid, so it stay vertically. It is also meant to be used for sloping ceiling.

[@DoItLikeDoli]

How are you liking the fan now after having it for a few months? We just bought ours on sale and looking at reviews before we install it :)

[@MotherDaughterProjectsDIY]

I love it! Provides great air and the remote it easy to use. I also like that it's more compact and clean looking than a typical ceiling fan. And the light is dimmable and a nice color temperature.

[@GJX-xy7dm]

Does it draw up cigarette smoke when in reverse ?

[@xingstruck35]

@@MotherDaughterProjectsDIY would this ceiling light be harsh for the room? I have a really dark living room but I’m worried that it will be too harsh. What’s your experience?

[@AdventureswithAceyboy]

My hooman is going to install this tomorrow. Thanks ruff, ruff 🐾🐕

[@guoykdenkok677]

Like the video but the click baity tip was unnecessary

[@WalmartRich]

What was click bait? It was almost perfect, there a few issues.

[@dennisrose5038]

I'm installing this same light now. I've done such fixtures before, including one mounted on a cathedral ceiling. The instructions that come with this product are TERRIBLE. No words just drawings. I guess they believe folks can't read anymore? Anyway, I couldn't figure out what the slim disc was for as it had obvious holes in it for attachment but the drawings don't indicate how or where it attaches to. So I looked for a video. I found yours. The extra stuff about changing out a box was wasteful. That should be a separate video. You failed to mention an important detail that I encountered early on. You must FULLY remove the set screws from the down rod before threading the rod into the fixture (K) because they interfere with the threading process. Trying to force thread it will not work and likely damage the threads. You glossed over the wiring bit for beginners, kind of important. I don't need it, but kind of important.

[@user-wr3zl8hj4b]

The instructions are terrible, terrible!!