How to install CCTV Cameras Using video baluns + network cable.

[@dixonb.monliah]

You are a very good professor. There is no way that someone who would learn from you will leave without taking in some knowledge.❤❤

[@Tech_Inside_Out]

I thank God who gives the wisdom. Am grateful to God that the channel is delivering value to my viewers. Its been my dream to impart knowledge and i thank God it is being achieved. There are more things coming up in 2024.

[@toyyibatmorisola2129]

We will be expecting those good things that are coming in 2024.

[@perciusadlawan5853]

This is the definition of tutorials. Not rushed & well explained. Keep it up. Just subscribed. Please do more videos

[@Tech_Inside_Out]

Thank you Sir. I will continue

[@royochola]

This guy is smart, I like him

[@Tech_Inside_Out]

@@royochola Thanks

[@klinsheavens8426]

Mine where having lines why?

[@Tech_Inside_Out]

@klinsheavens8426 I don't quite understand your question but I guess you are talking about blurred pictures. It could be coming from low voltage being fed to the cameras as a result of running the cables over too long distances or using less than 3 pairs for power connections in your installation.

[@toyyibatmorisola2129]

Thanks so much sir, Allah will continue to increase each and everyone of us is knowledge.

[@Tech_Inside_Out]

Thank you, God bless you

[@GladysEtabil-se2gj]

Thank you 💕 very much for you using simple language for us to understand it well. May the good Lord bless you more 🥰

[@Tech_Inside_Out]

God bless you too.

[@stephenkojovan8634]

U are my Ghana brother..yes from your accent...am in Nigeria 🇳🇬 ♥️ ❤️...bro I will follow you bompa to bompa thanks a lot for the tutorial

[@Tech_Inside_Out]

Hi Kojo, Interestingly, am also Kudjo. Thanks for all the compliments. I give God glory for the wisdom to do this. There is more when you visit my channel www.youtube.com/@Tech_inside_out

[@ngendahayoplacide2293]

Best explanation I have ever heard!!!

[@Tech_Inside_Out]

Thank you

[@orangeduc3129]

Good job thanks greetings from Ghana. Best tutorial and the voice is calm for education

[@Tech_Inside_Out]

Hello, Thanks for the compliment. Am a fellow Ghanaian in Accra here but hails from the Volta Region town of Woe, near Keta.

[@orangeduc3129]

@@Tech_Inside_Out akpe kakaaka. Yehowa nana wo dorworwor nayi edzi. Okay more blessings

[@philipmasai842]

Came in late but have learnt alot. Thanks from Kenya.

[@Tech_Inside_Out]

Most welcome. Hello to all my Kenya friends.

[@iFlexxy]

Thanks you for detailed explanation on your video tutor i really do appreciate it because you have given more insight about the connection and installation of my cameras setup

[@Tech_Inside_Out]

Most welcome

[@RafaelGuedes84]

Thanks for the explanation. Greetings from Brazil!

[@Tech_Inside_Out]

Thanks very much. Hello my friends from Brazil, greetings to you all.

[@bensonchukwu813]

Great Expkanation .....simlple and calm

[@Tech_Inside_Out]

Glad you liked it

[@AnilKumar-my4vw]

Simple and brilliant lecturing

[@Tech_Inside_Out]

Thank you

[@EmmanuelOyekorode]

Good explanation nice one

[@Tech_Inside_Out]

Thank you

[@stream24media_]

Thanks you so much, its easy to learn from you sir.

[@Tech_Inside_Out]

Thank God.

[@Gonjax]

Hey, enjoyed your video. I’m installing a camera for a boat in the engine room so it’s displayed on the radar video feed in the wheelhouse and they already had a cat5e ethernet wire ran and can’t run a different wire. I grabbed a balun connector and did what was recommended in this video only difference is there’s a rca jack going into the radar, so I got a bnc to rca converter cable. Will this work for single video If I just use the bnc to rca connector and no recording? I’m having some issues and the camera won’t display doing this. Just trying to make sure im not doing anything wrong. Figured I’d ask someone with more experience like yourself while I’m trying to troubleshoot this issue. Also, can you power the camera with the box into an outlet and just use the solid green and striped green to display video on the bnc? Or do you have to use all of the Ethernet wire? Assuming you don’t have to use the other 6 if you have power coming from somewhere else. Thanks for the video as well.

[@Gonjax]

Also, I tried a 720p camera, a 1080p camera and a 5mp camera. Is there a certain camera I should be using as well?

[@Tech_Inside_Out]

1. The video output from the camera may not be supported by the system into which you want to feed the video. I will recommend that you pick an output from a recorder and rather feed the recorder output into the radar 2. You can use the cat 6 as the video conductor whiles power is taken from another cable, that works. You don't need to use all the cables of the cat 6

[@Tech_Inside_Out]

The issue is not with the camera resolution, it has do with the video format which is not compatible with your system no matter the camera resolution.

[@motivationvideo3954]

When IR light is off at night then will record the video?

[@Tech_Inside_Out]

The IR light goes off when there is adequate light for the camera to see images clearly but the recordings will continue even of the IR light goes off.

[@motivationvideo3954]

Sir,if there is no adequate light available in the room and even the red light is not showing,will it still record?

[@rev.shadrachhaizel9219]

When after fixing the bullet outdoor camera and it sometimes turns black and white the later goes to colored, what could be the cause of it?

[@Tech_Inside_Out]

When that colour changes to black and white at night, it is normal phenomenon. At times it may be due to low light condition around the camera during the day. If it is not caused by any of the 2 conditions i just mentioned. then you may have to check your power supply to the camera.

[@rev.shadrachhaizel9219]

@@Tech_Inside_Out I will do just that, thank you very much.

[@kestermartinez]

What ethernet cables are you using sir? The pure copper or the cca? I heard cca cables are not recommended for analog cctv

[@Tech_Inside_Out]

Cat6 copper cables

[@oliverdala5497]

Very clear explanation thank you sir

[@Tech_Inside_Out]

You are welcome

[@kaliefahsackor8303]

What's maximum length of cable used for powering cctv camera in order to get the exact power for the camera?

[@Tech_Inside_Out]

The maximum recommended cable length is 100 meters

[@priyalasya8422]

very good & well explained thankyou sir

[@Tech_Inside_Out]

Thank you too

[@eddiej.2354]

Another Great video! Thanks again Eddie J. Long Island N.Y

[@Tech_Inside_Out]

God bless you. Here is the link to my channel, www.youtube.com/@tech_inside_out

[@qzillah]

I have been waiting for these tutorial for long

[@Tech_Inside_Out]

O ok. Has it answered all your questions? If there is any other area you think i should do a video, let me know too.

[@ARTHURichie]

This was very helpful. Thank you.

[@Tech_Inside_Out]

Glad it was helpful!. You can find more of my videos at www.youtube.com/@tech_inside_out

[@swaggst]

Please we’ll like to see a video of adding external mic on cctv’s to dvr/nvr. Thanks

[@Tech_Inside_Out]

Well noted

[@orangeduc3129]

@@Tech_Inside_Outyes please we will be waiting for such videos

[@armlightmusa8740]

dose distance of the cat6 matter ,in terms of long in meters ranges like 100m ,90m.80,?

[@Tech_Inside_Out]

Once you are within 100m of the Cat 6, there won't be any problem. Signal quality challenges occur when the length goes beyond 100m

[@drameriemmanuel1187]

Is it normal to supply 12v battery to 12v camera? Will current affect affect the functionality of the camera

[@Tech_Inside_Out]

It works perfectly, but you need to provide the right terminals to be used in connecting the cameras.

[@drameriemmanuel1187]

@@Tech_Inside_Out where no AC power ,do I need inverter to convert the power from solar system

[@Tech_Inside_Out]

Where there is a 12 v dc power, it cn be used directly without the use of an inverter.

[@aravinthma5880]

5 Hd cameras connect to cat6 cable but Dvr connect How adapters using video baluns Dc power supply

[@Tech_Inside_Out]

Please i don't quite understand the question, can you please rephrase it so i can understand and answer.

[@michaelmic7071]

Kindly give a video on how to link a camera to the phone and how to share the camera to another phone

[@Tech_Inside_Out]

Please watch the remote view on phone here kzbin.info/www/bejne/iWHRZ4xqasxkbqM Remote view sharing is also here. kzbin.info/www/bejne/q2TCdJh-Z6t9etU

[@linta2011]

What would be the maximum lengrh between DVR and Camera?

[@Tech_Inside_Out]

At most 100m

[@barlommit859]

Thank you for the well explained video, I have problem, I connected my camera using the balunes but I did not have the male and female power connector, so I used the orange and wite orange for the video and had them plugged into the balunes, and I connected the grean pair directly, but camera did not work!? Any advice?!

[@Tech_Inside_Out]

It is advisable to use the power adapter because if you miss the power polarity (+, -) you could short circuit the camera which can lead to damage of the camera. In doing the direct connection as you mentioned, you should check the cable properly, it could work.

[@brooklyn_uav4589]

Thanks for your video I learned alot

[@Tech_Inside_Out]

Glad to hear it!

[@techt0ktv368]

Can i ask how many meters is the limit using this cat6 cable? Can it be use for a hundred meters? Or less? Whats the exact working lenght? Thankyou in advance for the answer.

[@Tech_Inside_Out]

The recommended length to run it is 100m, but that is practical when you use pure copper cables. To be on the safer side, you should run it up to 80m when you are not sure of the quality of your cable

[@alexobinyan7399]

Hello. I enjoyed the lectures. Can cat5 or 6cable take analog camera to 700meters

[@Tech_Inside_Out]

No, the recommended length should be 100m.

[@opssonopsson8282]

Sir can i use a power supply unit in combination with a 12v connector? I mean a DC power supply unit in the end of the DVR with a 12 v connector at the camera?

[@Tech_Inside_Out]

Yes, what is needed is the 12 volts, the source does not really matter in terms of what device is used in producing the 12volts

[@opssonopsson8282]

@@Tech_Inside_Out Thank you sir

[@Tech_Inside_Out]

@@opssonopsson8282 🙏

[@iFlexxy]

Please i want to ask with this kind of connections will it also support audio too

[@Tech_Inside_Out]

Yes, once your camera has audio ability

[@Phavouriteinstallations]

Boss if you have multiplr cameras like 20,will you still use adapter?

[@Tech_Inside_Out]

You dont need adapters, you can use a single power unit for all cameras in place of the adapters

[@Phavouriteinstallations]

@@Tech_Inside_Out just like the one in the video, right?

[@orangeduc3129]

Will you join another cable to extend the pair’s you’ve chosen to go to the power bridge if you were to use the power supply unit ( what cable will be that)

[@Tech_Inside_Out]

I don't quite understand your question, but let me attempt with my understanding. 1. You are not supposed to join the network cables. 2. In running network cables, you don't have to exceed 100m 3. You can always get the network cables in excess of 100 m length. In case the above answers do not answer your questions, please write to me again on this particular question.

[@moradekeadetunji1756]

Very good video. Thank you

[@Tech_Inside_Out]

Thank you too!

[@josepherpelo2695]

is there a limit of distance for utp cable to have a good results of voltage and camera?

[@Tech_Inside_Out]

The recommended cable length is 100m

[@sunjivan]

How log distance will work ?

[@Tech_Inside_Out]

100m is the recommended distance.

[@GAF8673]

What is the benefit of using balum on short and long distance?

[@Tech_Inside_Out]

1. It gives you the chance to be able to use just a UTP cable in place of having to use coaxial + power, making the cables less bulky especially when installing many cameras 2. Drastic reduction in faults due to cable Terminations. You will be making less Terminations and hence less susceptibility to faults caused by Terminations. And many more.

[@jonathanbbosa7611]

Am inquiring whether you handle professional classes for camera installation.?

[@Tech_Inside_Out]

Yes, i do in Ghana for organised groups

[@ericananeababio1679]

Please your lo cation in Ghana@@Tech_Inside_Out

[@Saurabh1234-ou1zc]

Can we use all 4 pairs for dc power connection?

[@Tech_Inside_Out]

Yes, you can.

[@kepler79b]

Great tutorials!

[@Tech_Inside_Out]

Thank you. You can find more of our videos on our channel at www.youtube.com/@Tech_inside_out

[@jonesgotlop]

great video. you gained a follower in me

[@Tech_Inside_Out]

Thanks very much. You can find more of my videos on youtube.com/@Tech_inside_out

[@khalidinho2276]

An i use video balun to 300m cable coaxial because the image not good but in the tester good

[@Tech_Inside_Out]

It is not recommended to run the cat 6 cable beyond 100m. You would have to segment your network and make your cables shorter within 100m

[@fadhiliterri1798]

Very very clear!!

[@Tech_Inside_Out]

Thank you

[@markaustinsickbasshead274]

Can i use 1 cat6 cable for 2 cameras

[@Tech_Inside_Out]

That can work for cameras at short distances away from your DVR

[@alexanderstephen6483]

Why not share the cat6 cables into 2 for the power and signals respectfully, so we can also have strong signal

[@Tech_Inside_Out]

The video does not require a large cross sectional area of the cable to be transmitted. For power, cross sectional area is important.

[@ericnketia1948]

Good work sir

[@Tech_Inside_Out]

Thank you Eric

[@decocreteflooringgh90]

Very informative

[@Tech_Inside_Out]

Thank you

[@iskashiroyalmedia3477]

thanks u so much

[@Tech_Inside_Out]

Most welcome

[@reccakarl]

How long in meters to run video and power along utp cable?

[@Tech_Inside_Out]

100 meters is the ideal distance for running utp cables for effective results. Going beyond 100 starts with some level of depreciation in signal quality.

[@michaelifenojo]

@@Tech_Inside_Out pls one of 3 NVR 16 channels takes 1 hour to load. 3 NVR. 2 converter close to Poe switch then to each NVR. Please what is the issu

[@Tech_Inside_Out]

Check your hard drive

[@nnamanimicheal2082]

Please how long can someone learn this work with an cctv camera engineer . I really like to learn it

[@Tech_Inside_Out]

In about 2 months you can master it very well. I live in Ghana, i guess you live in Nigeria.

[@nnamanimicheal2082]

@@Tech_Inside_Out yes sir

[@neatman7874]

But on the video ballon instructions…it’s says ….No power required

[@Tech_Inside_Out]

That just means that the video balun is a passive device, it does not require power to function. The power termination is meant to power up the camera not the video balun.

[@gilbertkodjobrown190]

Pls are these cameras ip or analog??

[@Tech_Inside_Out]

These are analogue cameras. I recommend this video for you. kzbin.info/www/bejne/gGWog4h6fsuaitE

[@athlontechnologies2438]

Please can you video on ONVIF IP camera to nvr

[@Tech_Inside_Out]

Alright, well noted

[@jettkolonna2358]

Very useful

[@Tech_Inside_Out]

Thank you

[@adangodana3635]

Supposed you have 30 camera how many power charger will you require

[@Tech_Inside_Out]

When installing large number of cameras like the 30 you mentioned, you don't have to use the adapters. You require a power supply Unit, and in a 30 camera installation you need a 32 channel power supply unit. Here is a video that shows the kind of power supply unit I am talking about. kzbin.info/www/bejne/nGrQf5uNaN2Mi8k

[@adangodana3635]

can i still use cat 6 for power supply for many camera

[@Tech_Inside_Out]

@@adangodana3635 When you say many cameras, what do you really mean? Please clarify so i can give an answer. On standby for the clarification

[@jamaicanpunch]

Thank you

[@Tech_Inside_Out]

You're welcome and thank you too.

[@nk7381]

Thank U Sir

[@Tech_Inside_Out]

Welcome Sir

[@gencharles12]

Does cat6 give the same picture quality as Coaxial cable?

[@Tech_Inside_Out]

Yes, but that is subject to observing the rules and doing it well

[@andiaziz8033]

How to seting ip in one network

[@Tech_Inside_Out]

Please i dont understand the question. Can you please rephrase it?

[@andiaziz8033]

@@Tech_Inside_Out Im use cctv analog here make video balun and cable cat6 . VIDEO BALUN in Two Dvr 16 Ch and 8 ch. and One NVR . see all camera in One monitor. How step by step seting all camera in One Monitor..thx brother🙏🙏🙏

[@Tech_Inside_Out]

You are welcome

[@adekoyagbenga4325]

Good morning How can I reach you

[@Tech_Inside_Out]

Because i cannot put my number openly, please send me an email [e-mail] so that i can share my number with you.

[@mahadevkumbhar5307]

❤

[@Tech_Inside_Out]

Thank you

[@tomfeger2290]

wireless dumnut

[@Tech_Inside_Out]

.

[@EmmanuelOyekorode]

Good explanation nice one

[@Tech_Inside_Out]

Glad you liked it

[@gregor1729]

Brilliant 🎉🎉🎉i see my dream is fulfilled... I have a CAT6 ethernet roll was wondering where to use it in this wireless networks world...now you have just given me the secret .. CCTV installations... Thanks so much!!

[@Tech_Inside_Out]

Thank you

[@RajabuOmary-sk7bs]

I want to know how to connect two analog camera via one cat6 cable

[@Tech_Inside_Out]

It is not advisable to connect 2 cameras on one Cat 6.

[@omgvanderoliphant3240]

Good afternoon...if been following you nue for sometime..i just want to how to connect 2 AHD cameras to a 1 Cat 6 cable

[@Tech_Inside_Out]

It is not advisable to do that, because there is need for the combination of a number of pairs of cable to use for power to each camera in order to have optimum power to the camera. when that is done, you will realise that one cable will not be adequate to wire up 2 cameras since apart from power, there is need for a pair of conductors to be used for video

[@dadaboat2359]

Very, very impressive. Well done, bro! I have some questions on the power side. My first question is: Why would you choose a normal 12V adapter over a power supply? Second, you didn't mention that, especially when installing many cameras, if you don't prefer to use splitters, it means you'll need multiple adapters, correct? And third, when the distance is very far, which power source is recommended-the adapter or the power supply? thanks and regards

[@Tech_Inside_Out]

1. I used the adapter for the sake of the demonstration and also considering the fact that i was using just one camera. 2. The adapter is not an option when installing many cameras. The best is to use the power supply unit. 3 The supply Unit.

[@dadaboat2359]

@@Tech_Inside_Out very grateful sir catch up later thanks

[@mugalyaronald2842]

Hello I would like to know what to do in case my cat 6 cable is short and needs to be extended, is it possible

[@Tech_Inside_Out]

It is not advisable to join a Cat 5 or Cat 6 cable. Should it become necessary to join, you can join it on a Krone

[@mugalyaronald2842]

@@Tech_Inside_Out well at this point its necessary . thank u for your support

[@SahilBhagat-jk3si]

Without ballon we connect bnc connector or not

[@Tech_Inside_Out]

There are BNC connectors that can be connected to Cat 6 cables without using video baluns

[@ramadhantiba4592]

Be blessed, the pressure is decrease

[@Tech_Inside_Out]

Amen. God bless you

[@orangeduc3129]

12v 1.5A or 12v 2a power adapter is okay to supply quality power the 2mp camera please thanks

[@Tech_Inside_Out]

Each camera comes with a specification on voltage. You may have to check the power requirement of your camera in choosing the appropriate power your camera

[@orangeduc3129]

@@Tech_Inside_Out okay please thanks

[@GroverSecuritySystems]

Hello. Thank you for your video. Very nice indeed ! Is there any reason why to choose this particular pair for the signal and not another? I'm asking because the 4 pairs have different twisting pattern...

[@Tech_Inside_Out]

There is no special reason for using the pairs i used and it is not a convention. You can use any of the colours, just be sure to do the matching properly.

[@Aa32aa-pk4ue]

Does this mean that I can connect any camera to dvr closed loop system? Nothing connected to network?

[@Tech_Inside_Out]

Please i don't understand Closed zloop system. Kindly explain.

[@Aa32aa-pk4ue]

@@Tech_Inside_Out decentralized system. Like DVR, not connected to any network. Only cables and server that is controled from room server only. No remote acces of any kind and no internet connection.

[@EmmanuelOyekorode]

Good explanation nice one

[@Tech_Inside_Out]

Thank you

[@salifumubarikwumpini1286]

Will audio work on cameras with audio??

[@Tech_Inside_Out]

Yes, but if the camera is one that has a separate audio connection cable, you will need to wire it up too

[@salifumubarikwumpini1286]

@@Tech_Inside_Out Ok thanks so much

[@baliesullaiman1629]

what is the DVR

[@Tech_Inside_Out]

DVR - Digital Video Recorder It has video ports called BNC inputs All cameras are connected to it through the BNC inputs.

[@orangeduc3129]

Please do you available videos on camera audio setup on the nvr and trip wire setup for motion sensor? Please thanks

[@Tech_Inside_Out]

No please

[@zekmsiska4501]

Hello sir, isee uve used two video baluns on one camera, what happens when u have 4 cameras

[@Tech_Inside_Out]

The video balun comes as a pair to be used for both ends of the cable. so for 4 cameras you will require 4 baluns of which you will be given 8 pieces since it is sold as a pair not individually

[@michaelmic7071]

I enjoy the way u teach very nice simple and easy to understand

[@Tech_Inside_Out]

Thank you so much

[@chinyamamanongo8754]

Which one is the economic to use between the use of Siamese coaxial and CAT 6 with baluns

[@Tech_Inside_Out]

If you do the comparative analysis, the use of the coaxial cable + power or siamese cable are cheaper compared to the use of Cat 6 However, the wiring involved in the use of Coaxial or siamese cable is quite complex to wire, voluminous to handle when dealing with large number of cameras. The use of Cat 6 is easier to run, less bulky but could give problems when not properly wired. When you properly follow the steps in this video, you should not have problems using the Cat 6 cable

[@orangeduc3129]

With this setup can I control my ptz camera and also will I have audio from the camera to the nvr? Please thanks

[@Tech_Inside_Out]

This is a complete setup that can be used in wiring any kind of camera. However, there are specific cameras with audio pick up abilities. Every PTZ camera has its specific way to wire it up based on manufacturer. Expect a comprehensive video on PTZ Cameras in the very soon.

[@orangeduc3129]

@@Tech_Inside_Out please thanks for your info

[@armlightmusa8740]

can u imagine am doing construction in iraq but yo work really taught me a lot ,really appreciate u

[@Tech_Inside_Out]

Am fulfilled when my videos are helpful. Thanks for the testimony

[@raxumar5602]

​@@Tech_Inside_Out are you in uganda I want to come and teach me because I want to learn cctv installation

[@gertieemorrison5447]

The best explanation on how to connect a cctv camera.

[@Tech_Inside_Out]

Thanks very much. You can find more at www.youtube.com/@tech_inside_out

[@jacksonnshuti2341]

Thank You so much!!!

[@Tech_Inside_Out]

Most welcome

[@Crazyfreak424]

Hello. I'm setting up cameras 120 meters away. Someone recommended I double the cables on the balun for better signal on long distances. Also can I run 4 cameras on a single cat6 cable while having the power supplied locally

[@Tech_Inside_Out]

For such long distances, i will recommend having Multiple DVRs, where a DVR will serve cameras close to each other and you then link all the DVRs together so you can have all the cameras put together at one location. That will prevent all the distance related challenges.

[@orangeduc3129]

@@Tech_Inside_Outgood idea

[@orangeduc3129]

@@Tech_Inside_Outplease do you have any videos on this

[@binnybuzz]

Nice vid..how many amperes is the 12v power supply?

[@Tech_Inside_Out]

Each bridge provides a 1amp current

[@Tech_Inside_Out]

Each bridge provides a 1amp current

[@emmaxtech7901]

Sir I love ❤❤ your video tutorial sir i would love if you can show how we can connect cat 6 cable to the CCTV power supply I would appreciate it ❤❤

[@Tech_Inside_Out]

Well noted