HOW TO Install cpanel on ubuntu container in wsl?

HOW TO Install cpanel on ubuntu container in wsl?

[@Voaq]

Please how to null it?

[@whmcpanelnull]

Hello You can use this steps for share license created a VPN as a service in Docker using OpenVPN Step 1: Create a Dockerfile Create a new file named Dockerfile with the following contents: # Use the official Ubuntu image as a base FROM ubuntu:latest # Install OpenVPN and other required packages RUN apt-get update && apt-get install -y openvpn easy-rsa # Create a directory for OpenVPN configuration files RUN mkdir -p /etc/openvpn # Copy the OpenVPN configuration file COPY openvpn.conf /etc/openvpn/ # Expose the OpenVPN port EXPOSE 1194/udp # Run OpenVPN when the container starts CMD ["openvpn", "--config", "/etc/openvpn/openvpn.conf"] Step 2: Create the OpenVPN Configuration File Create a new file named openvpn.conf with the following contents: port 1194 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh2048.pem topology subnet server 10.8.0.0 255.255.255.0 This configuration file sets up OpenVPN to listen on port 1194, use UDP as the transport protocol, and create a tunnel interface. It also specifies the locations of the CA certificate, server certificate, and private key. Step 3: Generate the CA Certificate and Private Key Run the following commands to generate the CA certificate and private key: openssl req -x509 -newkey rsa:2048 -nodes -keyout ca.key -out ca.crt -days 365 -subj "/C=US/ST=State/L=Locality/O=Organization/CN=VPN CA" openssl req -newkey rsa:2048 -nodes -keyout server.key -out server.csr -days 365 -subj "/C=US/ST=State/L=Locality/O=Organization/CN=VPN Server" openssl x509 -req -in server.csr -CA ca.crt -CAkey ca.key -CAcreateserial -out server.crt -days 365 Step 4: Build the Docker Image Run the following command to build the Docker image: docker build -t vpn-as-a-service . Step 5: Run the Docker Container Run the following command to start the Docker container: docker run -d --name vpn-as-a-service -p 1194:1194/udp vpn-as-a-service This will start the OpenVPN server and expose port 1194 to the host machine. Client Configuration To connect to the VPN server, you'll need to create a client configuration file. Create a new file named client.ovpn with the following contents: client dev tun proto udp remote-cert-tls server remote 1194 resolv-retry infinite verb 3 Replace with the IP address of the host machine running the Docker container. Connecting to the VPN Server Use an OpenVPN client to connect to the VPN server. You can use the openvpn command-line client or a GUI client like Tunnelblick.

[@Voaq]

@whmcpanelnull is thos steps free? I mean even if I didn't have a liscence will this work?

[@whmcpanelnull]

hello It depends, if you use the cloud with different IPs, yes, it is free.

[@Voaq]

@@whmcpanelnull please what about plesk, how to null plesk on almalinux