How to install EHS Racing Controller & Barker's Exhaust Yamaha Grizzly 700

[@JB-57]

Great video bud, very helpful! I plan on doing the same mods to my grizzly and now I'm pretty confident I can do them myself. Thanks!

[@longshotadventures763]

Hi there .. so happy my video helped.. take your time, related back to the video if you get stuck along the way.. you'll have it installed in no time.

[@hartwellking8135]

Great video...

[@longshotadventures763]

Glad you enjoyed it

[@francoisvanengelen5648]

good day. thanks for the good explanation. I have a question. where did you buy the mirrors. or what is the brand of the mirrors. Thanks in advance from the Netherlands

[@longshotadventures763]

Hi there. Thanks for the comment and question.. the mirrors are "Moose" brand and I bought them from "FortNine.ca" they were running about $60 each last year..

[@Alexb_1775]

Still no problems and happy with everything?

[@longshotadventures763]

Hi there.. Yes, after 3 seasons of running these mods, everything is still working great.. and very happy with the improvements they made.. thanks for the question

[@dangriesemer3710]

I know this is pretty old but I'm installing the same setup now, does your barkers exhaust flop around and bang off the shock with your spacer bushing installed like that?

[@longshotadventures763]

Hi there. Thanks for the question. Yes, unfortunately, I couldn't use the big spacer they provided and used a couple of smaller ones that I had in the shop, so the clamp would be tight around the muffler, and that helped. It still moved a slight amount, but nothing like it was with the provided spacers.

[@dangriesemer3710]

@longshotadventures763 I was able to put the exhaust band around exhaust, put bolt through both holes, then spacer bushing on bolt and thread it to the frame. Tightened it down and it's rock solid and spaced away from the shock with plenty of clearance. They may have sent me a different spacer bushing but it looked similar to the one in your video. Thanks for responding.