How to install Garmin transducer And upgrade stereo on a budget | sea doo switch 2022

[@lisa21069]

Where did you get the dashboard cover for the Garmin?

[@irisrodriguez3388]

Thanks for the video super informative. How does the switch perform in the ocean?

[@seadooswitchextremetubing]

It’s amazing! Just can’t beach it cause the propeller underneath

[@shottown911]

Thank for taking the time to make this video

[@amkenkentable]

My dude…thank you for sharing! I’ll be doing this when we get ours. Also, your calf muscles are impressive!

[@seadooswitchextremetubing]

I do gym classes with all women and take my daughters with me. 😝 thanks 🙏

[@chanborisok53]

130, 170, 230, don’t worry it’s all the same engine (1630 ACE). Some performance companies are starting to take orders to “streamline” the engines. Great video! Definitely giving me ideas on how to run wires and installing an aux batt with an isolator. Waiting to get my switch in the next month .

[@cravertom]

thank..much appreciated that youput this vid together.

[@seadooswitchextremetubing]

I used the 20 degree angle

[@michaelosmon]

My boat didn't come with that mat around the driver seat pedestal. Wtf

[@blackhillsrider2626]

Thanks for the video. I truly appreciate you are taking the time to make this,

[@jessenmedina5784]

my seadoo is 21 feet does the 12* work for me or should i use another?

[@seadooswitchextremetubing]

I used a 21 pitch it’s the tallest one! The most important thing is I used a marine adhesive sealant and glue. Let it dry completely!

[@seadooswitchextremetubing]

You can sit the transducer in a bucket of water to see it works! I used a 5 gallon. You can hear the sonar and that’s why you need antifreeze so that the transducer will work..

[@terrydixon6093]

Great video , mine should be here sometime this month in July . Ordered it back in September and looking to do the same thing you just did . Thanks for the great help . Keep up the rocking 😎

[@davidsdean]

Nice work, clean and simple, the Seadoo switch mods are rolling in...

[@guymichael7653]

Any chance you can share the stereo components you used? Did you just add the additional speaker box in the back or was is a separate head unit. any additional instruction on how you did the stereo would be awesome, I want to do this? Thank you!!

[@seadooswitchextremetubing]

Kicker 10 inch with amp built in. But I use a JBL 310 party box with battery 10 hour.

[@terrydixon6093]

Great video , still waiting on mine supposed to come in this month July . Going to put in a transducer and extra speaker’s 🔊 like yours . Thanks for the video . This should help me out a lot 😎.

[@kchedville]

WOW that Transducer you installed has almost doubled in cost since you made this Video, looks like our Economy is going down the Drain...:(

[@deviousrcngkrew]

So I just got mine this past weekend how fast were you able to go with all your people on board mine is still in break in mode how long was it till you got full power on yours after how many hours and how do you get the hours on it I haven't been able to find em thanks a lot

[@seadooswitchextremetubing]

I have no idea but don’t beach the switch or you’ll be replacing the impeller and bearing.

[@deviousrcngkrew]

@@seadooswitchextremetubing thanks for that reply makes sense I had already thought about that and bought 2 anchors just to be on safe side and just anchor it instead of beaching it when at the river but it's appriciated thank you

[@H20Guy-4Life]

The only way to get hours on it is to use it driving it around while varying the throttle. I've heard at 10 hours and after performing an oil change at 10 hours you should be getting full power. Can anyone back that statement up?

[@chadellis8842]

Where is the link to the Garmin cable you used?

[@seadooswitchextremetubing]

Amazon

[@seadooswitchextremetubing]

It’s on the video but it got a orange end and blue end.

[@paulopinto6348]

Which subwoofer are you using?

[@isaaclacasse8148]

Have you had any issues with the transducer not reading depth when moving at speeds over 15mph?

[@seadooswitchextremetubing]

It’s not perfect but it works

[@pascal9318]

Thanks for the video, I'll be doing this next week. Getting ready to order parts. Just to confirm, do we need that blue to orange cable? Even on the seadoo site it only shows the transducer without mention of an adapter cable. I got 4 sony bluetooth speakers that I can't wait to see how they sound on the boat, if not, I might revert to an audio install as well, because the $5K seadoo kit cost is kind of ridiculous to me. We can get subs that'll move the boat on their own for that cost. :-)

[@seadooswitchextremetubing]

Yes you need the cable!!

[@mm76012]

When I measure Deadrise I get 20 on the dot. Video said he used 12 on the same boat. Has anyone else measured it differently on their own Switch?

[@JtWhissel]

Did you do 20 or 12?

[@rickstephenson2888]

Great video thank you

[@JohnGMcIntyre]

The video was great and I was able to install the transducer last month. It was working fine until my last outing this week when I got a message on the Garmin that said an incompatible cable was being used. Have you seen this?

[@blackhillsrider2626]

Good vid. So what number cup did you use? Did you use just plain old silicone or marine adhesive? As for should use antifreeze, you must use antifreeze or some other compatible liquid.

[@seadooswitchextremetubing]

12 worked fine. 100% silicone tube in any Home Depot or lowes.

[@seadooswitchextremetubing]

20degree

[@seadooswitchextremetubing]

Any antifreeze

[@blackhillsrider2626]

@@seadooswitchextremetubing Great minds think alike. Did exactly the same!

[@H20Guy-4Life]

@@seadooswitchextremetubing Hi so just to clarify did you use the 12 or the 20 degree hull mount?