How to install Hall joysticks and resolve interference issues for ROG Ally?

[@MaggicBones]

I just got mine, followed the tutorial, and they work great, they fix the drifting issue on the ROG Ally 😊

[@Bl4ckH4nd]

Just got mine today from you guys, easy to install and they work great :)

[@megatron4355]

My right joystick is very slow when it comes to moving the camera around in games.

[@ismaelfernandez7725]

I dont understand why you speed x4 the video

[@85crazytechlaz]

Okay so I just ordered one from you guys today hopefully it works.... I will be making a video on it as soon as I get it thank you 👍👍

[@HandheldDIY888]

Please feel free to contact us if you have any questions about the installation.

[@85crazytechlaz]

@@HandheldDIY888 awesome well do thank you 👍

[@isaacruiz4597]

Today i got mine and they doesn't work, the left joystick has a lot of interference, also with the trigger, and with the right one too, i follow the tutorial and i can't even make the calibration in armoury crate. Hope they make a new ones that work properly!

[@YQWERandYQWER]

I had a bit of trouble trying to get a decent calibration, my left stick wouldnt complete a full circle and would dip into the center slightly and the right stick would dip into the middle for the whole left side of the circle. My solution was %10 deadzone 75% outer deadzone. It gave me a higher error percentage but i achived full range of motion on the sticks

[@mickeymouze5]

what about your trigger? did it effect it when pressing on causing it to move slightly

[@YQWERandYQWER]

@@mickeymouze5 sorry only seeing this now , but no in games like elden ring, multi versus, hollow knight, fall guys i seen no movement at all

[@Futura2500]

@HandheldDIY would it be possible to send me some shielding paper as I have the kit without this thanks

[@kewa_design]

The shielding paper seems to BE generally Not included

[@kidrobotphatfreakz9750]

When i ordered mine I didn’t get any shielding paper, What kind of material should i use as an alternative?

[@Zel912]

I ordered 1 standard pair and 1 tighter pair. I test them as right stick. All of them drifts in different direction. I tried setting dead zone but it makes moving in circle not possible. my $50 is thrown away.

[@Avstract23]

On the box how do you know which is tighter and standard? One box says ST

[@Zel912]

No, there is nothing mentioning which is which. I have to try them.

[@risingdawn5259]

My left stick doesnt work at all, its horrible, i cant even calibrate it in armory crate because it cant make a full circle, and yes ive used the shielding paper and set the deadzones

[@iROZAY]

I'm not having the same issue it's just that my right side stick doesn't make a good circle and both of them are reading over 14 % error on the circle test I also use the shield paper but I don't think it's working properly

[@reklessgameing]

Mine just started doing that when I dropped it , how u fixed yours ?

[@Agenthoneydew33]

​@@iROZAY the circle shape doesn't necessarily matter your error percent matters. You want the error percent as low as possible

[@dimraa]

wouldnt it be better to apply the shielding paper for both joysticks ?

[@HandheldDIY888]

Hi, you do not have to apply shielding paper for the right side.

[@davidfaustino4476]

Yeah you don't HAVE to.. but you're in there already. Just put some under the right stick too.

[@adriannunoperera242]

What happen if i forget to disconnect the battery and change the sticks?

[@yeng7803]

Happen to me, the ally still power up, not detecting any defect, you just need to plug it and hold the power button abit longer. i found out this 1 month ago after thinking i lost my ally due to this mistake. Last sunday i pickup just to make sure it died, suddenly it powered on, imagine the relief i felt dat moment!

[@mikejhart214]

Where is the Win 4 tutorial?

[@danjennings5068]

Pretty disappointed in these. Having to run 20% deadzone on the left stick to clear the interference and 80% outer cutoff to get even 12% error on the right stick. Hardly the perfect circularity shown.

[@Agenthoneydew33]

Perfect circularity isn't the issue the error percentage is what you want to make sure is low

[@danjennings5068]

@@Agenthoneydew33 I agree perfect circularity isn't necessarily required but that's what they advertise. At 90% it was awful.

[@no1thebos]

calibrate the sticks first

[@danjennings5068]

@@no1thebos I have. They're so far off the calibration won't take

[@uriva0707]

Thanks

[@Gtx1990]

Does it work??Does it have magnetic interference??

[@HandheldDIY888]

Hey, it works! It comes with a piece of shileding paper, which can effectively eliminate the interference.

[@linuxanan9691]

I want one.

[@alexandrews3512]

My right analog stick drifts to the left even after calibrating it in the Armoury create programme as per the instructions

[@vitaAutLetum]

Your problem can be resolved by calibrating the right joystick with last week's update and then adjusting your deadzone.

[@Ghost_Casual_Gamer]

Ordered mine and also a lot more stuff from the IndieGoGo campaign plus from the store. Full mods. I am wondering why is shielding used only on the left stick? Or it should be used on both. Hope I get them soon.

[@PlayItRalph]

left stick causes interference with L1 and L2 buttons because of metal parts present near the hall effect joystick unlike with the R1 and R2 buttons that is far from the right hall effect joystick. so shielding is very important

[@Ghost_Casual_Gamer]

Thank you very much for the reply

[@pulsargmng]

@@PlayItRalph Hi bro! How is your hall effect joysticks now? Have you encountered any issues?

[@kiggidykay]

After going through the installation and calibration process several times to make sure I followed all the steps correctly, my ROG Ally was awful with the left stick jumping around the screen, the right stick registering as half-presses, and generally being unplayable. I would never buy these again.

[@markshenefelt7611]

Garbage. My left stick activates with trigger pull no matter the shielding or dead zone I give it. Lies

[@markshenefelt7611]

Also right stick drifts upward

[@Nyegnav]

You seriously monetized an installation video for your product? You should be ashamed.