I like the commitment you’ve put into this platform.
@GeovanisGarage4 жыл бұрын
Thanks bro 🙏🏽
@jarrett50833 жыл бұрын
Bruh I can’t get over how much it sounds like a newer wrx 😂 sounds dope
@K03sport3 жыл бұрын
Really clean video series. Definitely worth a watch, not just for corolla hatch owners.
@GeovanisGarage3 жыл бұрын
Yooooo thank you bro 🙏🏽❤️
@garrettmatlock15103 жыл бұрын
That mid pipe is the most restrictive part in the entire exhaust, I believe it drops down to 1-11/16" at its most narrow. Any concerns for heat since the original header heat shields can not be reused?
@patrickreed46282 жыл бұрын
Planning on wrapping these, personally.
@brendanyue21874 жыл бұрын
Bro this build is looking amazing! Headers really just make this come together even more
@GeovanisGarage4 жыл бұрын
Thanks❤️ appreciate the compliments bro💪🏽
@robertsantiago31022 жыл бұрын
Is it possible to install the header without scratching it? Thinking of coating it with Jet-hot...
@richiesworld13 жыл бұрын
Nice! Maybe ease up on the glitch effects.
@safigamingyt27603 ай бұрын
So for the check engine light. I will need 02 sensor 90 catted de fouler and small defouler.
@Springfield5303 жыл бұрын
Hell yeah bro . I just got my XSE
@GeovanisGarage3 жыл бұрын
Letssssss go 😤🔥 welcome to the e210 community 🙏🏽🔥
@ashtonmayer4531Күн бұрын
Do you have to use the 2j midpipe with a highflow cat or can you use the stock cat verter to put back together
@evilsix48192 жыл бұрын
Ordered the 2j cat back. Mid pipe and headers. Getting the mid pipe and cat back on sep 8. The headers in October. Iv watched this so many time in preparation you have no idea 😂 wanted to say thank you 🤘
@TheSleepyMechanic05246 ай бұрын
Do you know if this will work for the Corolla cross??
@CasketLife3 ай бұрын
I would like to know as well
@Wa2im10 ай бұрын
Any problems with it cracking and how have the welds held up?
@GeovanisGarage9 ай бұрын
No sir! 100% held up great!
@safigamingyt27603 ай бұрын
Will the check engine light go if I get the 02 sensor spacer on?
@vzn5069 Жыл бұрын
My friend has an e210 sedan se, by any chance do you know if it will fit his car?
@GeovanisGarage Жыл бұрын
Yes it will!
@Yatogamiii3 жыл бұрын
Think itll work the same on the sedan?
@GeovanisGarage3 жыл бұрын
Yes it should!
@haha16803 жыл бұрын
Does adding the headers and midpipe void the factory warranty?
@GeovanisGarage3 жыл бұрын
Yessir!
@JadenZeCreator3 жыл бұрын
Just copped a 19 SE 6 speed 😍 and I had no idea it could sound this good, you gave me some ideas bro!
@GeovanisGarage3 жыл бұрын
Thanks for watching bro🙏🏽🔥
@ulisesmedrano33823 жыл бұрын
Check out torkmotorsports for a stage 1 tune
@JadenZeCreator3 жыл бұрын
@@ulisesmedrano3382 thanks for letting me know, I’ve heard of Tork a few times had no idea they were getting dirty with the E210
@ulisesmedrano33823 жыл бұрын
Also AMT makes a tune, tork and amt are the only two so far making tunes
@junjiehuang9100 Жыл бұрын
I was put the 2j header on it couple days ago , sounds so great. But the engine light is on . 😢
@GeovanisGarage Жыл бұрын
It’s Bc of the O2 sensor! You need a tune 😭
@junjiehuang9100 Жыл бұрын
@@GeovanisGarage thanks bro. Where can I get the O2 sensor? 2J website? Where can I go to tune ?
@Nikos-hr7ix6 ай бұрын
Does it pass emissions inspection now?
@brandonedwards98123 жыл бұрын
Put a wobbly on right before the deep well to tighten the studs, rounding those off would not be good. Doing this work when the car is newer makes the process so much easier.
@kevinwences41914 жыл бұрын
Had any issues with heat so far ??? Headers are a good way to add some power so i’m thinking about doing this with my hatchy
@GeovanisGarage4 жыл бұрын
No! No issues whatsoever!
@kevinwences41914 жыл бұрын
@@GeovanisGarage how about the ECU? are you tuning it since you’re running so many new parts ?
@GeovanisGarage4 жыл бұрын
Haven’t found any tune for the corolla :/
@jamilinbixler32844 жыл бұрын
@@GeovanisGarage I think there’s an Orange virus tune.
@72catboy3 жыл бұрын
AMT Tuning has a tune for the Corolla. 💯👍
@ronniebonnie68663 жыл бұрын
we’re you able to keep the check engine light off?
@GeovanisGarage3 жыл бұрын
Yeeeessss and no. It was on and off
@ETiradoRacing3 жыл бұрын
@@GeovanisGarage who do you do to keep it off? Or does it just randomly come and go?
@GeovanisGarage3 жыл бұрын
Well I don’t have the headers anymore so I don’t have the light. One way you can get rid of it permanently is if you get a tune specifically for the headers/intake
@ETiradoRacing3 жыл бұрын
@@GeovanisGarage how come you took off your headers!?!
@GeovanisGarage3 жыл бұрын
I gave them away as a thank you for my 1k subs! :)
@willcollado2152 жыл бұрын
Do you pass inspection with the tune out
@GeovanisGarage2 жыл бұрын
Unfortunately in California you won’t. I can only speak for Cali bro :/
@jkmusngi91313 жыл бұрын
Do you have a before and after clips?
@GeovanisGarage3 жыл бұрын
Yes, before headers sound is right here kzbin.info/www/bejne/f52tgIKKitalhqs After headers is right here kzbin.info/www/bejne/pH6uhqyahcR_qpI
@zackaryfreeman83374 жыл бұрын
Finally! Thanks man for putting in the work
@GeovanisGarage4 жыл бұрын
Thank YOU for the support man. 🙌🏽 appreciate it so much 💪🏽
@esepaisakid95453 жыл бұрын
Does it mess with the smog
@GeovanisGarage3 жыл бұрын
Yes
@robertorosado9195 Жыл бұрын
Hi brother! This header fix in a 2021 2.0 Sedan ?
@GeovanisGarage Жыл бұрын
Yes!
@chrisseng59173 жыл бұрын
Hey there. Do they make one for a 2020 sedan model?
@GeovanisGarage3 жыл бұрын
This one will fit the sedan too!!! 🔥
@chrisseng59173 жыл бұрын
@@GeovanisGarage thanks
@jacobburt84065 ай бұрын
What mid pipe are you using here? OEM or 2J?
@trickz71844 жыл бұрын
Damn so amazing bro!🙏🏽 love your vids bro! Keep it up!!
@GeovanisGarage4 жыл бұрын
Thank you so much bro 🙏🏽🙏🏽🙏🏽
@Flametree14922 жыл бұрын
I have a 2019 hatchback and I think its too low? Can this car be heightened to give more ground clearance? When I purchased this car I forgot that I live in the North East and we have snow! lots of snow and lots of potholes! I was going to trade it back but my car devalued dam near 10K!!!! So, I'm kind of forced to keep it. This car drives wonderfully on the highway no issues there but now I realize this is not a good car for the snow or is it?
@GeovanisGarage2 жыл бұрын
I have no idea if it’s good for snow, I live in California! You can put coil overs and max the ride height!
@thomaslykins86164 жыл бұрын
Also where did you get the o2 fouler elbow?
@GeovanisGarage4 жыл бұрын
Totally forgot to put it in the description! But it’s on there now... sorry about that bro! www.2j-racing.com/headers-midpipes-cb/02-sensor-90-catted-de-fouler-stainless-steel.html
@thomaslykins86164 жыл бұрын
@@GeovanisGarage no worries and I appreciate!
@ericchavez992 жыл бұрын
Did the defouler really work? On the 2J racing website it states that it is not guaranteed that the defouler will prevent a CEL on
@GeovanisGarage2 жыл бұрын
It’s here and there, I would say it’s 50/50
@prettyboyygr3 жыл бұрын
A question the dealer don’t say nothing because u put that ? Like effect ur like contract with them if you have? Just curious because I was thinking to buy a new exhaust and etc but idk if gonna affect or some
@GeovanisGarage3 жыл бұрын
Adding headers will definitely void drivetrain & emission part of your warranty! But adding an exhaust won’t affect your warranty whatsoever.
@kevinsoriano53783 жыл бұрын
I just got an SE, is it worth modding ? Headers, exhaust, etc
@GeovanisGarage3 жыл бұрын
MOST DEFINITELY 🔥🔥🔥
@thehnoskos3 жыл бұрын
Is that defouler you used one from 2J? The defouler that came with my midpipe isn’t angled like that.
@thehnoskos3 жыл бұрын
Nvm just saw the link in the description!
@jollyknoxvilleful11 ай бұрын
Does the Defouler come with the 2j header?
@r3alitygam3r332 жыл бұрын
i have the se sedan would this fit the sedan?
@GeovanisGarage2 жыл бұрын
Yes!
@FL5.isaiah3 жыл бұрын
is this on a 2.0l engine you putting this on?
@GeovanisGarage3 жыл бұрын
Yessir!
@FL5.isaiah3 жыл бұрын
@@GeovanisGarage i have the SE sedan, do you think if i buy the same headers it'll fit?
@FL5.isaiah3 жыл бұрын
@@GeovanisGarage i want to get it with the mid pipe too
@GeovanisGarage3 жыл бұрын
Yes
@KISSame98111 ай бұрын
Do all the newer models ie. 2020 have this stock? And how does it improve performance, if at all? Barely dipping my toes into car builds/mods
@coachgomes Жыл бұрын
Did you feel more power from the headers...??
@GeovanisGarage Жыл бұрын
Yes 100%
@coachgomes7 ай бұрын
@@GeovanisGarage About how much more horse power do you think you got with the 2J headers, and a Cat Back exhaust system...?? Did it throw a check engine light at all..??
@josedelgado37343 жыл бұрын
I tried to comunícate with them but no luck by any chance you know if this will be California “legal”
@GeovanisGarage3 жыл бұрын
Not legal anywhere! They say only for “Track use only”
@ZZH1986 Жыл бұрын
What happened to the XSE?
@GeovanisGarage Жыл бұрын
What do you mean bro?
@ZZH1986 Жыл бұрын
@@GeovanisGarage Your latest videos are of a "GR" But in the original videos the Corolla is badged an "XSE" I'm just wondering what happened the to 4 cylinder version?
@junjiehuang91002 жыл бұрын
Is that 2jr header fit with the remark exhaust?
@GeovanisGarage2 жыл бұрын
Yes!
@junjiehuang91002 жыл бұрын
@@GeovanisGarage order it today.
@GeovanisGarage2 жыл бұрын
Nice man! Hope you love it! 🔥
@junjiehuang91002 жыл бұрын
@@GeovanisGarage got remark exhaust and 2jr header. I hope the sound make it better , got to wait 2 months. Can’t wait ….😄
@jacobdandan33323 жыл бұрын
which one you install first? the exhaust or the headers?
@GeovanisGarage3 жыл бұрын
The exhaust first!
@jacobdandan33323 жыл бұрын
@@GeovanisGarage ok thank you.
@hapahoundАй бұрын
Do you still work on Corollas? How much do you charge for installation? I have an SE sedan and would like to get headers installed...
@Rolla54832 жыл бұрын
It's this fit in corolla LE 2020 ???
@GeovanisGarage2 жыл бұрын
If it’s the 2.0 engine yes it will!
@Rolla54832 жыл бұрын
@@GeovanisGarage 1.8🥲
@tonysan18593 жыл бұрын
If I'm running the OEM midpipe, would I still need that defouler?
@GeovanisGarage3 жыл бұрын
Yes
@One_gauge4 жыл бұрын
Where did you order your rear diffuser from?! I can’t find the carbon version from a legit source
@GeovanisGarage4 жыл бұрын
kzbin.info/www/bejne/g3_Cq2B6j9uZgqs Link for the carbon version is in the description of this video!
@thomaslykins86164 жыл бұрын
Does the oem o2 fit on the new on?
@GeovanisGarage4 жыл бұрын
Yes it does!
@thomaslykins86164 жыл бұрын
@@GeovanisGarage how did you get no check engine light?
@GeovanisGarage4 жыл бұрын
Installing defouler and retighten headers after a cycle and repeated the process until gone. Only had to retighten them twice.
@eliperez3174 жыл бұрын
Was up bro where can I buy those headers for my Toyota Corolla 2020 I would like to buy the headers meth pipe cat bag complete exhaust maybe you could help me find it. Thank you very much I hope to hear from you.
@GeovanisGarage4 жыл бұрын
Hey man! Thank you for watching the video. The links for both the headers and 90 degree defouler is in the video description!
@oje79242 жыл бұрын
Would this fit the 2022 Corolla Apex?
@GeovanisGarage2 жыл бұрын
Yessir!
@willcollado2152 жыл бұрын
Did you get a tune for this
@GeovanisGarage2 жыл бұрын
No but there is a tune out there for it bro!
@NoFaceJay053 жыл бұрын
Hey man ! Love the videos. I have a 2020 SE hatchback that im looking at fixing up and your videos are just reassuring me of doing that.. Question, why the replacing of headers? What does it do exactly?
@GeovanisGarage3 жыл бұрын
Thank you for watching the videos bro 🙏🏽❤️ the headers were replaced for little bit of HP gain but mostly I was trying to achieve a perfect sound for the car!
@arianarodriguezavina80982 жыл бұрын
@@GeovanisGarage 😱omg ! I love this video! perfect sound , I’m triying the same as you just to gain a little bit of HP 👌🏼👍🏻did you see the difference n the HP to much ? which header do you recommend for my corolla hatchback 2022 ? where did you buy it ?
@GeovanisGarage2 жыл бұрын
The difference was slightly noticeable, but the sound was very noticeable! I recommend the 2J headers! The link for the headers are in the description!
@arianarodriguezavina80982 жыл бұрын
@@GeovanisGarage thank you so much ! 👌🏼👌🏼🙏🏽🙏🏽
@daeonthemic Жыл бұрын
Think you can do this in your driveway? Every video I have watched has the car on a lift.
@GeovanisGarage Жыл бұрын
Easily done on a driveway! Done a few! Just have to be on your back of course!
@daeonthemic Жыл бұрын
@@GeovanisGarage awesome man thank you!
@Maisonier3 жыл бұрын
But this change the performance or fuel consume?
@GeovanisGarage3 жыл бұрын
Changes performance and I actually gained fuel economy since it runs lean without a tune
@Jtschultz603 жыл бұрын
Love the sound. What all do you have exhaust wise, to make it sound that good
@GeovanisGarage3 жыл бұрын
I just have a remark cat back exhaust!
@Jtschultz603 жыл бұрын
@@GeovanisGarage sounds awesome. Thanks
@GeovanisGarage3 жыл бұрын
Thanks man appreciate it! 🙏🏽
@trickz71843 жыл бұрын
Hey what’s up bronze back! Just wondering if the 2j headers come with the defouler or you have to buy it?
@GeovanisGarage3 жыл бұрын
You have to buy it!
@georgieguzman7372 жыл бұрын
Great video and thank you for the information 🙏
@GeovanisGarage2 жыл бұрын
Thank you for watching bro! 🙏🏽
@XEvolutionMR2 жыл бұрын
How much louder your car became inside after installing that?
@luisregules31132 жыл бұрын
Hopefully you see this comment bro 🥺 but is the 90 degree defouler needed or will the one that 2j provide still take away the cel ? Does the head gasket they provide leak or should I buy oem ones? Does the dealership ask any questions about the headers when you get a maintenance check up?
@GeovanisGarage2 жыл бұрын
Sadly the defouler works and doesn’t. It makes the light go on and off. Not a 100% fix. You actually need their gasket because it’s a little bigger & thicker. & the dealer won’t ask questions, having the headers will void your engine/emissions part of your warranty.
@braxtonwebster84213 жыл бұрын
Did you reinstall the heat Shield?
@GeovanisGarage3 жыл бұрын
No! It. Will not fit!
@justanotherjew2233 жыл бұрын
would it be possible to do any of these mods on the 2020 sedan corolla? or is it just for the hatchback?
@GeovanisGarage3 жыл бұрын
I Think it fits the sedan, not sure tho bro :/
@justanotherjew2233 жыл бұрын
@@GeovanisGarage ill look into it and contact some local shops and get an opinion. If this is possible im going for it, would be dope as a mf to do this lol. Appreciate the reply bro.
@GeovanisGarage3 жыл бұрын
It would be dope bro! 🔥 ofc anytime 🙏🏽
@4door_papi3 жыл бұрын
@@justanotherjew223 its the same Itll work
@justanotherjew2233 жыл бұрын
@@4door_papi bettt thanks bro
@IeetGloo524 жыл бұрын
Love the build man! I got the same headers. Any CEL with that 90 degree defouler?
@GeovanisGarage4 жыл бұрын
No check engine! Also have to retighten the header nuts!
@MegaCokamo3 жыл бұрын
I have a cvt, I heard something about the ecu restricting performance. Is this something you’ve gotten around and have you seen any improvement to horsepower ?
@GeovanisGarage3 жыл бұрын
Never heard of that! But now im very interested!
@MegaCokamo3 жыл бұрын
@@GeovanisGarage 2022 Toyota se with a cvt transmission. Manual was too hard to find lol
@GeovanisGarage3 жыл бұрын
Most definitely! I tried but I had no luck, I needed a car ASAP so I settled with the CVT
@MegaCokamo3 жыл бұрын
@@GeovanisGarage apparently they only make manuals for the se sxe, apex but only 2% of those are manuals. I got the sedan se
@koreystrzelczyk41963 жыл бұрын
Will they fit on a 1.8l?
@GeovanisGarage3 жыл бұрын
Not sure bro!
@nightshade21423 жыл бұрын
Have you had your car tuned?
@GeovanisGarage3 жыл бұрын
No sir 😭
@DogsSnipes2 жыл бұрын
Hey Geovani, great video! I wanted to do this on my car, and I was wondering if I need to worry about things in the comment section talking about heat? I was planning to do what you did and get both the header and remark exhaust system, because your videos were helpful and the exhaust sounds great.
@GeovanisGarage2 жыл бұрын
There’s no issue with heat bro! Everything was all good for me! There’s also a lot of people who are running headers & they haven’t ran into any issues! You will be good bro! Thank you for watching the video 🙏🏽
@LyndonTCorbett Жыл бұрын
Header - there is o my one. Other than that, nice vid.
@iitoxicfury835 Жыл бұрын
I installed them on mine a year ago for some reason every once in a while I have to retighten all my header bolts as they keep coming loose
@sk-ps9ph2 жыл бұрын
geovani how are you man hope your good....tell you my story and give me your idea.so I got throttle body spacer and cold air intake from 2jracing I installed them everything fine no check engine light but I noticed later that my idle not going under 1500. I contacted them they told me you need to tune it so everything get back to normal and the problem why im gonna tune it if I don't have headers, so removed the 2j intake put back the factory but kept the spacer everything went back to normal did you have any issue like this before?
@GeovanisGarage2 жыл бұрын
Yeah, unfortunately when you put all those bolt ons, you have to tune the car. There’s really no way around it :/
@JUANPtech2 жыл бұрын
Quiero ese headers. Donde,, como lo consigo.
@GeovanisGarage2 жыл бұрын
En 2Jracing!
@brandonlewis25553 жыл бұрын
Amazing content. Definitely subscribing!!
@GeovanisGarage3 жыл бұрын
Thank you 🙏🏽🙏🏽
@cchaddmaruquin10053 жыл бұрын
Did it void your warranty or your car was paid off?
@GeovanisGarage3 жыл бұрын
This voids power train warranty!
@rcreapers93724 жыл бұрын
Sick car
@reid93884 жыл бұрын
NIce. Was there any Hp or Tq gains
@GeovanisGarage4 жыл бұрын
Yes, more on high end torque!
@n33mo813 жыл бұрын
Where did you buy it
@GeovanisGarage3 жыл бұрын
From 2J Racing. Link is in description!
@chrisvega223 Жыл бұрын
How’s the gas mileage after doint this
@GeovanisGarage Жыл бұрын
The same bro! 🙏🏽
@anthonyvenditti78812 жыл бұрын
Does anyone know if replacing these voids the warranty? I was looking at 2js power pack 3, but am concerned as I paid to extend rhe warranty for 125k
@mikeproctor72779 ай бұрын
Easy with a lift and the right tools
@GeovanisGarage9 ай бұрын
It’s also easy with 2 jack stands! I’ve done about 20 at people’s homes & it’s just as easy!
@sunexia42524 жыл бұрын
Finally haha been waiting for this video! But long story short how did you deal with the check engine lights?
@GeovanisGarage4 жыл бұрын
Defouler and retightening bolts twice!
@sunexia42524 жыл бұрын
@@GeovanisGarage ok bro! Do you have to buy the defouler or is it stock from the OEM pipe?
@GeovanisGarage4 жыл бұрын
You have to buy it!
@sunexia42524 жыл бұрын
@@GeovanisGarage awesome do you have the link for me boss?
@GeovanisGarage4 жыл бұрын
Link is in description! I’ll try to find the original one I used tho!
@evolvng4 жыл бұрын
I would be concerned about thermal dissipation and the tremendous amount of heat coming off the headers. Especially due to the fact that there’s little to no airflow to the firewall or the rear portion of the engine. The car is aerodynamically sound and doesn’t have an air scoop. A good ceramic coating would help but I believe air has to be directed towards the headers to control high temperatures that will most certainly be an issue when idling for a prolonged period. Good video nonetheless 👍🏼
@GeovanisGarage4 жыл бұрын
Yeah I figured that out till after lol. It should be fine tho, I won’t be running them for too long! Thanks for the support 🙏🏽❤️
@GeovanisGarage4 жыл бұрын
It’s bc I won’t be tuning the car!
@brandonedwards98123 жыл бұрын
You could have them ceramic coated.
@s5SnipEmo3 ай бұрын
@@GeovanisGarage Did you ever have issues with the heat?
@isnowyazn2 жыл бұрын
This looks like an official PITA to DIY with floor jacks. Aside from living in an emissions compliant state for cars, it really sucks to spend unnecessary time redoing parts to pass bi-annual smog tests….
@drizztthedrow25254 жыл бұрын
Nice vid, have you noticed any performance gain or increased milleage?
@GeovanisGarage4 жыл бұрын
Definitely noticed performance gain!
@FlippyDidWho2 жыл бұрын
No homo the song kinda fire 🔥
@GeovanisGarage2 жыл бұрын
Bet 🤣🤣🔥🔥
@Eddiemedia.3 жыл бұрын
When is the 1.8 stuff coming out 🥺
@GeovanisGarage3 жыл бұрын
Not sure bro 🥺
@IrvingDzulD4 жыл бұрын
Great installation, that look awesome. The Rev video is on private btw.
@GeovanisGarage4 жыл бұрын
Thank you very much🙌🏽 the rev video will release in about 6 hours🔥🔥
@IrvingDzulD4 жыл бұрын
@@GeovanisGarage ohh I see thank you for the clarification. I'll be back later to check it out. The Hach is looking nice.
@GeovanisGarage4 жыл бұрын
Appreciate it boss 🙌🏽🔥
@frankiej.rodriguez23023 жыл бұрын
Love the car man!! Sounds amazing!! How's the drone? I wanna have the same setup.
@GeovanisGarage3 жыл бұрын
It does have drone! But that comes with having headers! I learned to deal with it when I had it!
@guttergadgetzz61932 жыл бұрын
I’m sorry to be that guy. But is this the 2.0 or the 1.8 ?
@guttergadgetzz61932 жыл бұрын
Nvm. I seen xse and it made sense.
@kbb9354 жыл бұрын
Amazing 👌
@GeovanisGarage4 жыл бұрын
Thanks 💪🏽
@Damingo543 жыл бұрын
How much did you lower your car?
@GeovanisGarage3 жыл бұрын
Only about 2 inches
@Damingo543 жыл бұрын
@@GeovanisGarage Just bought a 2021 nightshade edition. Trying to figure out what I want to do.
@Damingo543 жыл бұрын
@@GeovanisGarage also where the hell do you find someone to work on your car. Was looking at an expensive kit for suspension and lowering but no idea where I would take it to be worked on.
@Damingo543 жыл бұрын
Was looking at RS-R TOYOTA COROLLA HATCHBACK SPORTS-I COILOVERS 2019+
@GeovanisGarage3 жыл бұрын
So this is a DIY channel, so everything is done by me! I show everything step by step, so don’t be Afraid to do it yourself! Have confidence I yourself, I believe in you bro! 🔥
@kamgm5713 жыл бұрын
Hey man! Absolutely love the build! I just wanted to ask if getting the 2J Midpipe is worth it? Just wanna hear your opinion :)
@GeovanisGarage3 жыл бұрын
Yes it’s worth it! Have to have an exhaust! Would be great if you added the headers! 🔥
@kamgm5713 жыл бұрын
@@GeovanisGarage Hey man thx for the reply! Definitely putting in the remark exhaust and gonna add the headers and, now, midpipe later on. Thanks man! Again i absolutely love the build and hope that one day mine will look anywhere near as nice. Have a good one!
@GeovanisGarage3 жыл бұрын
Thank you man! Appreciate you! 🙌🏽 if you ever have any questions feel free to ask! I’ll always try my best to answer 🙌🏽
@sk-ps9ph2 жыл бұрын
hey geovani I got a question does the headers and the mid pipe from 2j work with the catback remark do they fit on each other thanks man keep it up
@GeovanisGarage2 жыл бұрын
Yes they do!
@razorfingers2 жыл бұрын
It looks like you removed a set of headers to install a slightly different set of headers. I'll just go with a cat back system. I'll bet there was no HP increase and you might have even lost torque. That said still a good video for those who might want to do this.
@pebblez_2 жыл бұрын
nice
@jeffl1484 Жыл бұрын
Nice. Header though, not headers.
@juanjoseesparza14 жыл бұрын
It’s easier to go from the top
@GeovanisGarage4 жыл бұрын
Really bro? How would it be easier?
@howardgray64072 жыл бұрын
you have a toyota corolla with a tow hook attached to the back bumper, what the fuck are you going to tow with that? a bag of sandals.