THE BEST set of instructions on how to install one of these I have seen on line bar none (including what KAD provide). Legend. As mini owner, thank you!
@AntsRC6 жыл бұрын
Glad to see you don't wear gloves and are not afraid to get your hands dirty
@youtubespectator6693 жыл бұрын
coming from rear-wheel drive most of my life, I thought you were dropping your transmission. "Oh, dear god" was my exact words in my head
@PaulMacey6 жыл бұрын
Another cracking video! I'm now considering the KAD shifter although I may just go for a new bias barrel instead. My only minor criticism is I would love to have seen the throw of the new shifter in comparison to the old one! Love the fact you kept in the roll pin mishap, rather than edit it out - these jobs never go perfectly to plan!
@MiniMattTV6 жыл бұрын
Another fantastic video lads! Absolutely love your style and although unintentional, it’s great that you showed how to get the pin back if your shop towel fails to catch it! Maybe a magnet would be a good idea next time?
@thebluep0tat06 жыл бұрын
Would have like to have seen comparison between the Oem and kad shifter...especially the throw reduction.
@g19anson4 жыл бұрын
With a standard gearbox, a lot of people find it will rapidly reduce the synchro dogs. You can be more likely to change quicker than the spinning stuff in the box wants you to, especially if you have worn bulk rings. But it does shorten the shift, great for a race car where you don’t care as much for mechanical sympathy.
@classicminidiy6 жыл бұрын
Been thinking about doing this on my car! Taking my video ideas. 😂
@Stevestonmotorco6 жыл бұрын
Great minds :D
@kasperkuhn83816 жыл бұрын
thank you for all the great videos, music and style. best regrades from germany.
@jfbento6 жыл бұрын
Nice video, again. Cheers for that, mate. I´ve added a M6 lock bolt to the top collar (theaded it M6 near the edge) so I can adjust it and it stays nice and tight. Just an advice to all the others: !!! DON´T BUY THE CHEAP 35£ ONES !! as they are poorly engineered and don´t justify the investment for the benefits you are trying to achieve.
@gavinivers89416 жыл бұрын
Nice piece of kit. A top tip, well under there lock wire the two roll pins on the sleeve connecting the rod to the gearbox input, as these can fall out, usual at the most inconvenient time, and it will be raining.
@Stevestonmotorco6 жыл бұрын
Gavin Ivers great suggestion, extra bit of safety never hurts
@freedomsrt83 жыл бұрын
Lol it would definitely be raining
@hadynmcloughlin4661 Жыл бұрын
Love your channel so informative and don't even own a mini... yet! Keep it up (new sub)
@NeilGrevitt6 жыл бұрын
Great video!! I need a Mini back in my life!
@TheThunderwars3 жыл бұрын
Took me hours to get the pins out. I didn't have the proper tool and used an old screwdriver. I'm also a rugbyman, which means that most jacks don't lift the mini high enough for me to have enough strength on the hammer. After two unsuccessful hours, I decided to solder a small hexagon head on a spare steel bar I had, and punched it from the far side of the car. In minutes, stuff was done. For the pins, just get your little brother to hold a magnet stick while you punch it, I had no problems of lost pins. If like me you happened to have your seat far from the dashboard, the gear lever is too short, you have to push your shoulder forward. KAD uses a M14 1.25 knob, and you won't find any prolongator with those metrics. You can find on AliExpress or eBay long shift knob (18cm) in aluminium with a self tap plastic screw that will make shifting a breeze. You will gain a bit more travel though, since the lever is further away from the pivot. But to me it feels really nice.
@SuperPenseBete6 жыл бұрын
The must is to put a KAD shifter for Moke in a sedan Mini ;). The shifter felt just under your hand and you avoid to have a too short throw like the std kad. You should try, it is the best of both worlds
@andre68935 ай бұрын
Brilliant product, the video was spot on. I’m having trouble putting it into first - any ideas?
@freedomsrt83 жыл бұрын
My supplied bolts on the shifter wouldn't thread in. I'm not bought some other self tapped bolts. It never did tighten up super tight. I think the supplied screws might be in between sizes or something. I did take a test drive and everything seems fine and is definitely an upgrade.
@austennaeve6 жыл бұрын
I have one on my 1275. I love it
@jom32596 жыл бұрын
Because of you I want to buy another mini !
@jhandy595 жыл бұрын
Don't throw away your stock shift rod stick as mentioned... Worn remote shift housings cause KAD Quick shifts to shift badly... causing frustrations and return to the STOCK shifter assembly. Many shifter housings are very worn out with the age of these cars today. A proper rebush is required to return tolerances and working shifting to a KAD Quickshift.
@abuhamza19706 жыл бұрын
Thanks for vid, looks like a great car you’ve got there. Did you manage to measure the “throw” of the gear-lever before and after? Would be interested to know the results. Also I’ve been thinking about doing this to my ‘80s classic alfa spider which has an unusually long throw. Any chance you have one of those lying around? 😜
@theondebray4 жыл бұрын
I fitted one, all worked well, but the throw is short & requires more effort. As its only for road use, I would actually prefer the std stick.
@dnbmania4 жыл бұрын
They sell a standard throw shift kit as well that also gets rid of the lift to reverse
@AntsRC6 жыл бұрын
How well does the shifter work??
@ИгорьКоптев-х7ш5 жыл бұрын
Super))Schort schifter👌🔥
@jpigg4 жыл бұрын
Hi Philip, do the two self tapping screw mess up the hole to put a regular shifter back in??? say I wanted the orginal Shifter back in the car after installing the KAD???
@leemclaughlin39273 жыл бұрын
id like to know this too
@truthseeker84836 жыл бұрын
How about some footage of the shifter in action?
@Stevestonmotorco6 жыл бұрын
TRUTH SEEKER we've had enough questions about the throw that we'll be doing a comparison video in the future.
@salmaneliyas1059 Жыл бұрын
Yes! Was this ever made? I just got mine fitted on, it is great but having difficulty finding 3rd gear shifting up. The shifter would go too far right and still has a little play missing the 3rd. Any advise??
@wordreet4 жыл бұрын
Nah man! What you should be installing is the 2 foot long gear lever from a '59 Mini that goes through the firewall right by the headlamp dip switch. 😂
@Vetrius6 жыл бұрын
Where do you order the KAD shifter from, direct from KAD? Also was hoping you'd walk through replacing the shifter seal, since it's a common leak point, and you're already under there.
@Stevestonmotorco6 жыл бұрын
We try to order directly from companies when possible. That's a good idea about the shifter seal. Many leak, and we'll be doing a video on the upgraded shifter seal kits in the future.
@therza032 жыл бұрын
Just had a KAD shifter installed. The lift ring for the reverse gear seems to annoyingly rattle. Has anyone experienced this? Have tried tightening it by twisting also...
@lohyongfeng3316 жыл бұрын
Hey bro may I ask what air filter suit for my mini 1000 carb?
@craigwilliams33874 жыл бұрын
we have a 5 speed gearbox on our Mk 4. Would the KAD shifter work on that gearbox as well?
@Stevestonmotorco4 жыл бұрын
I'm pretty sure that 5 speed gearboxes have their own specific shifters. But you would get the best answer from the gearbox manufacturer.
@zacharyr1235 жыл бұрын
The pins will not budge for me, any suggestions?
@pushingbuttons124 жыл бұрын
Installed this KAD Quickshift after seeing your review. Install when smooth but for some reason will not go into third gear? Only other thing I did was replace the oil seal. Any help would be appreciated.
@dnbmania4 жыл бұрын
Did you solve the problem?
@pushingbuttons124 жыл бұрын
dnbmania yes. It was the plate on the bottom gear lever box. Had it on the wrong way. Lol
@efishmotorsport85434 жыл бұрын
Anyone know how you put the shifter boot back on after installing the shifter?
@SmlzBam3 жыл бұрын
You can cut the top of it off until it gets slightly wider or cut a slit down the top, neither look particuliarly nice i guess you could try hestinf it up a bit and stretching it over ?
@lgnlgn46723 жыл бұрын
Hello NIce VIdéo...Place a piece of polystyrene of the addhoc diameter and the pine will sink into the foam ( Jacques Belgium)
@phmiller254 жыл бұрын
Q: for those lacking a Classic mini to work on yet inspired; how do I get my hands on a mini that needs to be restored. I am about to buy a seat and a steering wheel and put it in my living room so I can pretend.
@phmiller254 жыл бұрын
And a shifter I could mount on a box beside it
@lukedenver55943 жыл бұрын
Aware this is an old video but I’ve just bought the kad short shifter and for the life of me I can’t get it too fit it won’t go far enough down over the housing to be able to get the two small bolts into the existing holes have you heard of anyone else having this problem the shifter is from mini sport and seems to be genuine
@juanfurno6 ай бұрын
hello, did you solve the issue? how?
@slotcarracingargentina30756 жыл бұрын
Hi Steve! Thanks for the video!!! Im wondering that its not possible to change the knob??? and other thing the stick of the KAD is larger than the stock one?. IM owning a 1991 Spi Im a tall guy (1,87 mts) and im always fight for the lenght of the stock stick shift. Can gime some tip??? Regards from Spain
@Stevestonmotorco6 жыл бұрын
Slot Car Racing Argentina unfortunately the kad knob is integral with the shifter as it has a nifty lift lock for reverse. There are other brands that allow for stock shift knobs to be used, but not the KAD one
@slotcarracingargentina30756 жыл бұрын
Thanks Steve! find me at @mini.lotso on instagram
@Brivinci16 жыл бұрын
That is the only reason I have not bought one of these, or any short throw for that matter. KAD makes the best out there but I do not want to use that shift knob as my current one if very special. The integrated reverse lock-out is cool but I'd wish they would do another version without it.
@WilliamJSisti6 жыл бұрын
@@Brivinci1 Hey Brian - I just got the short shift kit. Should be installed in a few weekends. I'll take some photos and send them your way.
@angelsone-five79123 жыл бұрын
I fitted the twin of this to my Mini (non KAD but identical) and I can only get 3rd and 4th gears, any ideas?
@Stevestonmotorco3 жыл бұрын
Check your linkage for worn bits
@angelsone-five79123 жыл бұрын
@@Stevestonmotorco Not that, I screwed the new reverse light switch in too far.
@Stevestonmotorco3 жыл бұрын
Glad to hear it's sorted
@freedomsrt83 жыл бұрын
I am doing this in just a few minutes. Just finished put a new steering wheel on.
@leeharrison32764 жыл бұрын
What was the throw reduction? Thanks
@Stevestonmotorco4 жыл бұрын
We covered this is a separate video. Check out the shifter comparison, another short throw is compared as well.
@leeharrison32764 жыл бұрын
Thanks, found it. I only just started watching you guys I will have to catch up on all of your videos. Cheers from Australia
@tedmilbank11135 жыл бұрын
Any one else installed one of these and found that it is very tight ?????
@duncanmacleod51485 жыл бұрын
Im currently trying to fit and it is being a bastard, it is really tight to get down far enough to get the bolts in, the movement is also very tight
@lukedenver55943 жыл бұрын
@@duncanmacleod5148 how did you get around this I cannot get it far enough down
@alfflash5 жыл бұрын
Wash your hands when working in the interior bro...🤢