good explanation, always used #5's yrs back, but just got back into hobby after 30yrs. Always used styrene to adjust height, (the hard way), but this much simpler, kadee's are great.
@w.rustylane5650 Жыл бұрын
I spent nearly $400.00 changing out wheel sets and body mounted Kaydee couplers from plastic wheels to metal ones. After all, trains in real life have metal wheels and not plastic. I did a little over 100 pieces of rolling stock. Took the time to weather each piece as well. For coal loads I used real coal smashed to bits with a hammer. All tenders have real coal in them. Cheers from eastern TN
@David-yo5re10 ай бұрын
I did the same. I changed all wheels to metal and upgraded all rolling stock with Kadee couplers. I spent roughly $400 to $500.
@terryhenderson8405Ай бұрын
I feel you cause decided change all my wheels to irons wheel's and #148 kedee Coupler change all my rolling stock kedee Coupler its was challenge, but I accomplish what I want to do😅
@revrup2 жыл бұрын
Easy to understand explanations. I looked at some other videos on KZbin and couldn’t figure out what to do, but your vid was just what I needed. Thank you!
@YourLocalRailfan4 ай бұрын
You are supposed to use some form of screw to hold the lid on so it’s easy to change couplers. Hope this helps you in the future. 😊
@runninginthewoodsandrew6440 Жыл бұрын
Thank you for your video it has helped greatly in performing this action. This is from someone who has all the manual dexterity of a donkey with a toothpick. The video was clear and consise.
@ChrisSullivan-us6ml Жыл бұрын
Absolutely fabulous tutorial, well shot, excellent V/O, a complete and easily understood explanation. Many thanks.
@Greatdome992 жыл бұрын
Next improvements: add some weight (lead), and replace wobbly wheelsets with metal wheels (like those Kadee sells). Trains run far better that way!
@waynewootton53852 жыл бұрын
thank you for this video it was very very helpful
@tazsnuts997 ай бұрын
Should've screws the coupler boxes on for a more support
@ronstrainsandmore2 жыл бұрын
Fantastic video very informative great job on it!
@themillrunandwesternmaryland112 жыл бұрын
Thank you so much for the encouragement !
@andrebankston-ct6ws Жыл бұрын
I just got back in the hobby and spent good money on rolling stock and locamotives too find out different manufacturers couplers don't line up in height. Maybe the NMRA should monitor this a bit better instead of making locamotives look so "Prototypical " and expensive. Especially for younger modelers just getting into the hobby. Great video though. One word of advice, if your going too have magnets on your layout to automatically uncouple don't cut the hose but bend it slowly up so it doesn't hit the frogs.
@themillrunandwesternmaryland11 Жыл бұрын
Thank you for the comment and the advice! I recently started bending the hoses instead of cutting them.
@millcreekrails Жыл бұрын
Great tutorial, very helpful!
@waynewootton53852 жыл бұрын
can't wait until part 2 hurry up please
@hessxpress30162 жыл бұрын
i dont install the draftgear box, i just replace the hornhook with the springbox and knuckle coupler. works fine for me. if theres room ill super glue a box on the frame
@themillrunandwesternmaryland112 жыл бұрын
I've done the same on a lot of mine early on, and they're still like that and work fine too.
@runesvensson12445 ай бұрын
So, an undershank can only fit an overshank, not another undershank, or does it depend on the make and model?
@themillrunandwesternmaryland115 ай бұрын
Depends on the car and where the knuckle sits.
@runesvensson12445 ай бұрын
@@themillrunandwesternmaryland11OK, thanks!
@richardnelson-ux1zz11 ай бұрын
I'm wondering does kadee make ho gauge trucks
@themillrunandwesternmaryland1111 ай бұрын
Yes they do. Kadee part number 501 is the truck with 33" wheel sets. There are others as well. Hope this helps!