12 years later and this video is still helping people apply large decals like a pro. Thank you for sharing this! Just follow these simple instructions and you will get great results. Got decals on a trailer looking good thanks to you.
@flarob6169Күн бұрын
This is the way. All these other videos with demonstrators putting a tape hinge on top is wild.
@joachimstinson3175 жыл бұрын
I spoke too soon. I had 3- 3' x 13" Decals to put up on outside metal warehouse doors. This was the first time I did decals of this large size. Everything else i had done in the past were the size of bumper stickers. Using your method and my OCD, they turned out perfect. Thanks again for putting this on KZbin.
@shaeronsmith69374 жыл бұрын
Thank you so much for this help. I managed to complete a very large transfer myself for my son's room. Your instructions are perfect. Massive thanks from Scotland UK. Hope you are staying safe.
@d4dens7439 жыл бұрын
I took notes on all the steps (later when installing I would have forget it) and it really works! Believe or not, we didnt find any company to do this for us in a 200 km radius, so we have to do it our selves... Thanks a million!
@ionQagon Жыл бұрын
12 years later, you got a new subscriber and big thank from me =)
@brandonphillips8539Ай бұрын
I just started graphic design and installation , simple and to the point video, blessings
@valeriegirl26 жыл бұрын
WOW!!! I tried this, followed his method exactly and my sticker turned out PERFECT!!!! Follow this tutorial and you can't go wrong. Thank you so much!!
@Williedamaris5 жыл бұрын
Sticker or vinyl, still the same message, we are professionals and understand the message, call it how ever you want, the method is good, i use it for small vinyl like that, but for larger ones like a 24" x 12' i use a awesome two awesome techniques the give me a great result, thanks for the video and God bless.
@chrisinestes6 жыл бұрын
Great video... I was going to have to explain how I'd install a customer's vinyl to my customer, but I'll just send him the link to this video. It's almost exactly how I've been installing vinyl for 25 years. Thanks!
@JasonCleaveland12 жыл бұрын
Great info... especially the temperature info. I'm getting ready to install $800 worth of decals on a box truck in 45 degree temps. Exactly the info I needed!
@aprilballesteros474110 жыл бұрын
Thank you! Glad I watched this before trying to hang my large decal today! :)
@latanyaclark72057 жыл бұрын
Excellent tutorial...all it took was being patient and working slowly...decal is perfectly centered on my bathroom wall. Thanks!!!
@wlb4jc5 жыл бұрын
I watched this video this morning. And I was able to immediately adhered my vinyl sign to my wall. The only additional advice I would give is: take your time peeling the letters from the top surface. But yes I was able to do it myself and this is not in my skillset. LOL
@BarbieKaTara5 жыл бұрын
As a single mom trying to do this I greatly appreciate your video. 🙂
@tyagu31074 жыл бұрын
Thank you for including this information in the package. I bought a large full moon for my bedroom wall and it was important to know how...
@susanmorris51822 жыл бұрын
Thank you Veritas. V v good explanation and demonstration. Once the right hand half is fixed, and you start to peel off the backing from the left hand side, why peel it from the left rather than the centre, which would seem to make more sense to avoid bubbles/creases? Thanks again.
@tomiannie9 жыл бұрын
Thank you so much! We had to install a 3'x9' vinyl logo and I was terrified we were going to mess it up. Thanks to your great instructions it went up perfectly!
@lashartisttv63657 жыл бұрын
I used this method after watching your video and it made it so easy! Thank you for this video!!!!!!
@chrisryanyoung2 жыл бұрын
Went from hating this guy to liking this guy in a couple minutes.
@raheenb6 жыл бұрын
Used this to video to help me hang our son's large vinyl decal in the nursery, thanks!
@TamaraWilcoxwrites12 жыл бұрын
This is the method I use, too. However, I find that using a gift wrap cutting blade is much easier than a pair of scissors for cutting away the backing paper!
@printuksolutions11446 жыл бұрын
Awesome getting ready to do my first job and feeling nervous 😬😂
@alecpajor92739 ай бұрын
Is it possible if the sticker was too thin this kind of quick application wouldn’t go so well? My dad has a buisness with his own sticker printer. I feel like the stickers are way too thin and can only be applied wet. Stickers are being applied to trucks.
@rachelspence36894 жыл бұрын
This was a helpful video. Only thing is our decal wasn't sticking to my daughter's wall. Maybe I had it in the package way too long because we ordered it a while back and just now put it on and parts of it is not sticking. Any advice on how to keep it stuck to the wall ? I thought about putting a clear glitter spray paint but not sure if that will help or not. Any advice will be greatly appreciated 😍
@dlf19764 жыл бұрын
This is brilliant. Thank you for this very helpful tutorial. Even I understand it
@nellietodd2854 жыл бұрын
By the way, meant to say this was a great video for how to instructions. Thanks!
@stutishukla152110 ай бұрын
Hey , awesome video !! Just wanted to know what kind of vinyl is this ? It Seems like you have used a transfer paper but again whats this vinyl called as ? Plz reply back .. much appreciated
@nellietodd2854 жыл бұрын
Question???? and Answer Please....... We bought a unicorn face sticker from you, but we are putting it on the wall in a rental home.......and I thought it was the type of vinyl sticker that you can put on the wall and easily remove?? but now we aren't sure if that is the type we have......so could you please let me know if it is or not.......cause can't apply anything that is gonna be hard to get off the walls.
@brown5506111 жыл бұрын
I get to try doing this with an 8 foot logo on a box truck this week. Never tried center hinge but I know for a fact taping the top doesn't work on really big stuff. It's bubble central!
@EtotheLtotheP4 жыл бұрын
Great video! Very clear and it really helped prepare me to do this perfectly!
@BOOT5 жыл бұрын
This helped a lot but my ebay(some other brand) decal cover film was my main issue and still had some flaws I couldn't work out.
@xaviair2712 жыл бұрын
Great video and insider tips about temperatures.
@StandingLast17 жыл бұрын
Awesome video, I'm going to try this method out for hanging a 4ft x 4ft wall decal!
@bgbootha8 жыл бұрын
If you send this link to customers a qr code would be great
@rebeccajohnson89793 жыл бұрын
This works IF the decal is complete horizontally. My Corvette logo sticker came with some of the letters below the others. Where's the installation advice on how to apply them in a straight, horizontal line?
@kengel433 жыл бұрын
Thanks for the info man. Method works great!!
@henryimperio62632 жыл бұрын
Thanks for this tip.. i’ll be applying this one in an upcoming work.. thanks
@gonzo2.06 жыл бұрын
Nice install, beats top hinge and cutting into sections by far
@colleen61024 жыл бұрын
Great video; installation went perfect.
@NoahFlemingConsulting Жыл бұрын
Just used this to do a big decal - thank you
@pauladouglass94565 жыл бұрын
Please explain what you mean by using soapy water? I did one side of my trailer yesterday and it looks horrible. Came back to your video for a refresher lesson and caught that tidbit. Help please?
@MrLucifuge19735 жыл бұрын
If you spray the surface of your trailer with soapy water it wont stick right away. It'll grab but you'll have a bit of time to adjust your "sticker". It provides enough slippage to squeeze out bubbles or creases. Check out this video from a couple who use a wet application method. kzbin.info/www/bejne/m3bIqpJjbp6gf6M A lot of professionals dislike the wet method for varying reasons but as a non pro it helped me through my install. Hope this helps
@debbihuddleston30717 жыл бұрын
Great Video! Awesome logo
@ivar1988 Жыл бұрын
I know this video is old af but can you use this method in conjunction with the wet install?
@zacksmooth2725 Жыл бұрын
GOOD DAYN PLEASE WHAT TYPE OF VINYL IS USED FOR INSIDE THE WINDOW TO SHOW OUTSISDE THANKS
@chicago16808 жыл бұрын
This is exactly what I was looking for!! Thanks
@carlturner5442 жыл бұрын
Excellent vid mate!
@billbalsamico52989 жыл бұрын
Just starting out and have a 24 in cutter. What's the proper procedure on installing a graphic larger than 24 in. Like a graphic I would have to piece together
@StickitDecals9 жыл бұрын
+Bill Balsamico Place both pieces on the wall with the backing still on to get them where you want them. Use this method for one of the pieces. After you have that one piece on the wall, pull back about a half inch or so of the backing paper and fold it over or cut it off. You can then line the seams up and not have a lot sticky part touching the wall so you can reposition it. Then once you have it lined up, do this method for that piece as well.
@kristydeering90968 жыл бұрын
Jeremy Brewer awesome! that's exactly what I was looking for!
@billyballard15583 жыл бұрын
What about going vertical up and down with the sticker
@dustindierenfeldt43325 жыл бұрын
What is the best method for removal without destroying the surface of a finished sheetrock wall?
@jeanettelimas38277 жыл бұрын
Thank you so much for that video! What's the size of that sticker?
@silversurfer44415 жыл бұрын
What if you have two or three colors, like a drop shadow or a highlight? You can't see through the tape to register the separate colors, so how do you do that?
@maxwellvavana50663 жыл бұрын
Thank you for the video, it's very helpful
@botetiinvestments4019 Жыл бұрын
Excellent demo thank you
@TheCreativeChica10 жыл бұрын
Great Tutorial! Love your Logo!
@screenstory4 жыл бұрын
+1 for a QR code on the little slip of paper you include with your product. I viewed it on my computer, so I had a keyboard with which to enter it -- but so many people rely on their smartphones to get online that a QR code would make a big difference.
@zapashoes38264 жыл бұрын
Friend what kind of Wall is that And the vinyl u use . what is
@jimmyfavereau2 жыл бұрын
love the logo Veritas :D
@shanehutchinson63504 жыл бұрын
Let me save some of you a LOT of time and effort with vinyl decals: invest in a little thing called an Everhard roof roller. The 2" red roller with a blue plastic handle or wooden handle. Every single job I've done in the 5 years I've used it has taken half the time it would have, using a squeegee.
@gillmccuddy6 жыл бұрын
I just put some letter stickers on a window.. the letters kept getting stuck on the paper im peeling back.. any advise for that?
@yhordanna854 жыл бұрын
Hi, I would like to know how to remove the sticker? Thanks
@jogrybsli12 жыл бұрын
Thanks for this excellent instruction video
@bloodlinegate76 жыл бұрын
Hi i need to install a 3 meters by 1.45 meters long film sticker vinyl whatever its called, for a shop sign on a glass surface, would this method work, its too big.
@ChrisGriffithCrimeAuthor5 жыл бұрын
Thanks. Your method will help this weekend :-)
@bruleenie7 жыл бұрын
What if you're installing vinyl over a rough orange peel surface? Is it impossible? will it look like crap?
@mike4649466 жыл бұрын
We have done that - if it is very rough don't even bother trying! But if it is nor so rough try painting the wall with a few coats of clear sealant then try.
@kayfrance95236 жыл бұрын
What size is your decal w”x h”
@anawile31524 жыл бұрын
Thank you-great video!
@karlove825610 жыл бұрын
Is there any way to remove what is left of the lettering and decals after it is on the wall?
@EvilbotPR3 жыл бұрын
How do I get that transfer paper?
@Garrador13 жыл бұрын
really useful vid, thanks
@phodge09194 жыл бұрын
Glad I watched. Thanks!
@rebelsoul59805 жыл бұрын
Does this rip paint off wall when removing?
@dustindierenfeldt43325 жыл бұрын
I was wondering the same thing and cant find info anywhere.
@deanabatayo48412 жыл бұрын
Use a heat gun and peel slowly.
@bocahydro7 жыл бұрын
This was very helpful !
@dummymanfredmezalien35984 жыл бұрын
good job thank you Sir
@betty301411 жыл бұрын
Will wall decals work on walls that aren't smooth..my room has textured walls
@meghanbomberger409811 жыл бұрын
If it's any more textured than the orange peel type texture they usually don't work very well (at least not with out a TON of patience when applying). You can apply to painted wood or canvas though and hang them.
@betty301411 жыл бұрын
Meghan Bomberger Thank you!
@impresor3711 жыл бұрын
very good!!! tanks for the tips.
@provinilservice12 жыл бұрын
Muy bueno el tutorial. Es muy buena tu técnica. Gracias.
@mike4649466 жыл бұрын
Really helpful - Thanks.
@DarkShuriken7 жыл бұрын
Helped out, thanks!
@guyrodges2445 жыл бұрын
The official size of the graphic was 70" x 50". Add and inch or two to that. It's big. Too big to manage for 1 person. I didn't buy the graphic from VeritasDecalsApparel but apparently the company selling the graphics on Ebay was using a link to this video as their install directions.
@theresaroberts6145 жыл бұрын
Awesome!! Thank you!
@Ce2009ce6 жыл бұрын
Thank u ever so much for this instruction..
@tomsmith10012 жыл бұрын
Where do you print your decals?
@michaelpartington21696 жыл бұрын
Looks so easy
@salutsam2 жыл бұрын
perfect thank you
@latinflava188312 жыл бұрын
Good job... great instruction.
@acehartless60757 жыл бұрын
Thanks this really helped
@justicee.k.jones-mensah67877 жыл бұрын
Very very helpful
@ntsakoshilubane50252 жыл бұрын
What is the name of the font
@skywalker82853 жыл бұрын
Lol my sticker is about 30 ft long at work and they sent me out alone I’m tryna figure out how tf I’m going to do it
@idnuam6 ай бұрын
Hey man. Did you manage to get it done? How did you do it?
@nordhs11 жыл бұрын
Very well done video, although I could have sworn he was putting up the sticker in a 'crack house'. Probably 'tract' but you never know.....
@cornerstoneproductio8 жыл бұрын
Good Job!!
@Flip1110008 жыл бұрын
thanks for the tip, mine didnt turn out perfect but if i had used my way i would probably had ended up destroying it completly so im happy
@mike4649466 жыл бұрын
Was your way the "I don't give a fuck and want to get this sticker up as quickly as possible" ?
@magogon706 жыл бұрын
Grat video,thanks a lot
@ValentinanSantinamommy4 жыл бұрын
Thank you
@Mr_Chuckles3 жыл бұрын
Thanks bro
@stephanieeveritte255211 жыл бұрын
Although "Veritas" is mythology, its meaning & symbolic design is awesome!
@hisglory31687 жыл бұрын
Stephanie Everitte the truth of Jesus Christ is far from mythology, but Evolution is real mythology.
@Bernievids5 жыл бұрын
Project Veritas: find out about the scum of the swamp. That’s. A proper Journalist for anyone with the courage and brains to go beyond decal application.