How to install led headlight bulbs - H4/9003 - Novsight Auto Lighting

Visit our homepage: www.novsights....
========================================
Novsight Auto Lighting is a company working on the design and selling of the best automotive LED lighting, LED Headlight Conversion Kit, fog Lamp, led work lights, light bar, and so on. Nighteye Auto Lighting company only supplies high-quality LED lights. You can get it from eBay and Amazon.
This video will tell you in detail how to install led headlight bulbs （with cooling fan） - H4/9003
- Novsight US Amazon Shop（Comment below for 20% Promotion Now）:
💡N11US Series - H11：pixelfy.me/OrdsVi
💡N11US Series - 9005：pixelfy.me/QuJ7VU
💡N11US Series - 9006：pixelfy.me/ssHG9Y
💡N11US Series - H13：pixelfy.me/bcK61m
💡N11US Series - H4：pixelfy.me/bwJ9IC
💡N11US Series - H7：pixelfy.me/8rMfqC
💡N30US Series - H11：pixelfy.me/dqrdlm
💡N30US Series - 9005：pixelfy.me/h3i0ke
💡N30US Series - 9006：pixelfy.me/sidsxh
💡N30US Series - H13：pixelfy.me/pvk22g
💡N30US Series - H4：pixelfy.me/bo266p
💡N30US Series - H7：pixelfy.me/se1dbw
💡N52 Series (NEW) - H13: pixelfy.me/WkAl10
💡N52 Series (NEW) - H11：pixelfy.me/oaEWXy
💡N52 Series (NEW) - H4：pixelfy.me/fN7ahj
💡N52 Series (NEW) - 9006：pixelfy.me/7yxpPC
💡N52 Series (NEW) - 9005：pixelfy.me/CRUoG2
💡N52 Series (NEW) - H7：pixelfy.me/aoB7Qn
- Click here to discover more LED HEADLIGHTS:
www.novsights....

[@michaelmcarthur9718]

After all this time of swearing and cursing that I have struggled putting these into my car's , I come across this video I didn't even realise that the locking ring came off. Made the Job a hell of a lot easier. Thank you and great video and explanation

[@NovsightAutoLighting]

Thank you! Glad that we could help!

[@CoolitzX]

Finally was able to find the correct position. The bulbs were upside down... Thank you

[@NovsightAutoLighting]

Glad that we can help!

[@muzammilnawazhashmii]

So finally after the search of 2 hours, i find this helpful content to install Led in my car correctly as i have installed last week and LED is upside down i was disturbed by the light not satisfying my needs, and now i came to know that i have installed wrong.. i will make it correct tomorrow ✌️✌️✌️

[@gelan1212]

Thank you for this clear and helpful video, you showed me to know what LED LAMP MODEL BUY AND INSTAL. I bought today “Novsight N61 General Series | H4 9003 LED Bulbs”. For Honda Fit 2012.

[@NovsightAutoLighting]

Thank you for your positive feedback and support for Novsight. I'm thrilled to hear that the video was helpful to you.

[@s20328]

Okay, it's official I need to get the rubber housing like that, because my rubber housing covers until the 3 pin making 3 holes at the rubber housing.

[@NovsightAutoLighting]

Got it! We’re glad the video helped.

[@aaronbell8527]

Best bulbs have them in my car and vans been in the car 4 years 👌

[@manassingh-pl2uc]

Hi, i have an h4 led bulb but it has only one filament which has total of 6 small csp leds 3 for upper and 3 for lower beam.. traditional h4 bulb has 2 filament. Is there any problem with this because my beam pattern is not projected like halogen one's

[@fannyyt6254]

Proper installation of Novsight F03

[@L7dmullah]

I installed mine completely wrong thank you for this 😂😂

[@NovsightAutoLighting]

Glad that we could help!😊😊

[@statyisgod]

How will i know if the bulbs are outside down? What do i need to make sure of?

[@richardchan76]

How to remove locking ring of H4 Novsight A500.

[@shahabsadegholvad9756]

Day lights doesn't work after this modification

[@NovsightAutoLighting]

Hello, there could be a few reasons why the light isn't working. First, you can try swapping the left and right bulbs to see if the polarity is connected incorrectly. If that doesn't fix the issue, it might be a decoding problem. You can purchase a CB6 decoder from our website to see if that resolves it, or contact our online customer service for further assistance. I hope this information is helpful to you.

[@fuzzbucket00]

Cannot remove the locking ring !!!

[@justinf8336]

Great video, thanks 😊

[@dipankar4865]

Using 5 pairs of your products including nighteye,, very satisfied with products and built quality 👍. Latest I'm using the N37 H4, light output is very bright but the wattage I measured is only 40 watts , bought it from cloudsale, have I got the original quality I'm doubtful. Last time I bought the 14400 lumen H4 directly from Novsight, it's wattage is almost 40 watts as advertised and it runs way cooler . Please clarify about the low wattage if possible.

[@NovsightAutoLighting]

Hello, LED bulbs use about 80 percent less electricity, yet they can last longer and emit more light. That makes LED highly energy-efficient.

[@dipankar4865]

@@NovsightAutoLighting I asked particularly about the N37 H4, it's rated at 60 watt but it actually consumes 40 watts even at start. Is N52 better than N37 ?

[@NovsightAutoLighting]

The N37 has a higher wattage. The wattage data we label on products is the highest running wattage from the test lab. But for the product life cycle consistency and the best running efficiency, we programmed the power circuit to run at a stable wattage, not the highest.

[@Saa42808]

I have installed LED bulbs for sienna 2016 but high beam is downward the bulb has 9 3 clock orientation what should do to put light straight for high beam

[@NovsightAutoLighting]

Can you adjust the position of the light itself? It should be able to adjust the angle

[@yadvendrashekhawat9520]

​@@NovsightAutoLighting the position in 9 and 3 but which side to keep UP and which to keep Down for better Beam Pattern. Confused??

[@jameseby-ny3eu]

A very Fantastic Video...Thank You !

[@NovsightAutoLighting]

Thank you! Glad that we can help!

[@tonychg4929]

Haloo... instead of 3 to 9, 0 clock....can i put to 12 to 6 o clock..? Mine is h4 ..night eyes..

[@NovsightAutoLighting]

Hi, according to our test, 3&9 O'clock is the best angle because the structure of the reflector housing and projector housing. If you put it in 12 to 6 O'clock, you might get the wrong light pattern

[@kxf155]

Thank you

[@findolen8941]

I followed the steps but why my fo3 turns 12 and 6 o'clock? Any remedy to this?

[@NovsightAutoLighting]

Hello, there might be two reasons: 1.The taps on the collar, there is supposed to be 1 bigger tap and 2 smaller taps. The bigger one should be facing up 2.The light position before you put it in the collar. The wire should be facing up when the light is in the beginning position, then turn it clockwise. (if your series only have an up label, the up label should face down at the beginning position) Here is another new tutorial with a CG explanation, it should be able to help you out: kzbin.info/www/bejne/eGbRlJJuqrOrZ7M

[@briizcustoms9543]

What’s the purpose of a removable locking ring?

[@NovsightAutoLighting]

Hi, because the cooling fan will be bigger than the clip, if you install the whole light, the clip will not be able to close.

[@saedtarawneh]

Does the n52 fits for hyundai elantra 2007 ?

[@NovsightAutoLighting]

According to your car model, H1 is the best fit for your high beam, and H11B is the best fit for your low beam. But the N52 series don't have H1, we recommend you the N32 series.

[@saedtarawneh]

@@NovsightAutoLighting I will use it for low beam h7 .

[@youtubesachin6965]

In this video u r not intall proper 3’ -9’ clock u putting little bit left ????

[@azzermallillin2321]

Hello! Is there anyway i can adjust sa body of the bulb? Because they dont perfectly align horizontally like u said in the video. My bulbs are a little tilted to the right

[@NovsightAutoLighting]

Hello, although vertical is the perfect angle (facing 9 & 3 O'clock), for the H4, it is normal to have a tilt (could be up to 5°) due to the design of the light collar.

[@jhollygharpascual2941]

I also have a problem with the highbeam installed in our 2015 montero glsv. Whatever i do the bulb is locked diagonally.

[@junj8398]

hi what can you recommend for toyota hilux revo 2017? id like to order but dont know which one.

[@NovsightAutoLighting]

Hello! I think both N60US - H4 and N66US - H4 will be good choice for your Toyota

[@mominmajeed3945]

What to do if locking ring drops inside

[@NovsightAutoLighting]

If you do drop the locking ring. First, please don't try to pick it up blindly, because you might move the ring into a corner. Get a steel wire and use your phone camera and flashlight to locate the ring, try to fish it up. If that didn’t work out, you might need to take off the headlight housing to get it. We suggest you seek help from automobile technician

[@raymondmagat4025]

Is it safe to place back the rubber gasket for H4 socket? I have installed a Novsight H4 LED replacement with integrated Fan for my car. The car has a waterproof headlight and the bulb, including the fan is fully enclosed inside the headlight assembly. I feel that the LED would suffocate and overheat if i install the gasket. However, I'm not also comfortable in leaving the assembly bare at the back. Please advise.

[@NovsightAutoLighting]

Hello! It is okay to put back the rubber gasket. Our H4 design has already considered the heating problem. However, if you really worry about this, you could also try the A500-N30US-H4. Which has the exact same installation method as the halogen bulb.

[@lovelyparaiso9818]

Hi, is this applicable for Hyundai Elantra 2018?

[@NovsightAutoLighting]

Hello! According to our database, Hyundai 2018 Elantra uses H7 for the high beam/9005 for the low beam. This H4 is not suitable for your car.

[@jamesmason8099]

Hello! I have similar bulbs and the light pattern is the same, they angle UP to the right, but I'm in the UK and need them to angle up to the left, is there a way to change this at all? thank you!

[@conor20118]

Haven’t found a solution other than buying UK/Irish market bulbs

[@NovsightAutoLighting]

Hello! Is your headlight a reflector type? The light pattern is decided by the reflector cup/projector, which suppose to match the UK standard.

[@jamesmason8099]

@@NovsightAutoLighting ohhh okay perfect thank you! I never knew that!

[@sannynur4589]

How many watts per bulb?

[@surenderk8606]

Bro please update novsight n37 H4 varient... 🙏🙏🙏

[@NovsightAutoLighting]

Hi, the installation of N37 H4 is just the same as this one

[@sainath3687]

Hi, is there any way to buy this in India ?

[@NovsightAutoLighting]

Hi, yes, we do have some dealer shops in India. May I know which type of LED you looking for?

[@sainath3687]

@@NovsightAutoLighting H4 High, low beam with atleast 13000lm.

[@NovsightAutoLighting]

Hello, I checked with some Amazon dealers, unfortunately, their H4 is all out of stock Please contact us at "[e-mail]", so our support team could give you more information. Or, you could also visit our homepage at "www.novsights.com/". We still have it on sale

[@lolipoable]

The chances that most people will have car headlights with bulb connect outside the housing! Can anyone take you seriously?

[@louiegarcia7527]

MADE IN CHINA

[@NovsightAutoLighting]

We emphasize quality and user experience in all our products. The focus should be on the standards and performance of the product rather than the manufacturing location. Thank you for your comment!