How to install Led headlight on KTM RC390/250/200 | NIGHTEYE LED | HID Killer | BEST led headlight

This video is all about how to install nighteye led headlight on KTM RC 390. Also shows the before and after effects on installing these led tubes as compared to stock halogen bulbs.
Socket Type : H11
Buy this product here: goo.gl/RzCt2T (Use mobile app for discount)
NightEye is a Super Bright Headlights for any Car and bike. Best alternatives for HID's and stock halogen tubes. Available in all types of socket. Best led headlight for cars and bikes in india
- NIGHTEYE AUTO LIGHTING
- 72W/12V
- Pure White 6500K
- 9000lm/set(4500lm/bulb)
- IP68 Water proof
- Heat Sink with integrated Fan
Follow me on Instagram! Username: ciphersunny
www.instagram....
Background Music
I Don't See the Branches, I See the Leaves 10:16 Chris Zabriskie Ambient | Calm
You’re free to use this song in any of your videos, but you must include the following in your video description:
I Don't See the Branches, I See the Leaves by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommon...)
Source: chriszabriskie....
Artist: chriszabriskie....

[@souravsharma8055]

Projector + Led lights seems very powerful.

[@SohaM-7]

Yup

[@coolfreakboy23]

Lights looks gud quality. Very bright especially in projectors

[@evanagullana3422]

Thank you for this video. 👌 From Philippines

[@ridersunny7606]

Guys if you like this video and want me to continue making such videos then do support me by giving it a Thumbsup, smash that Subscribe button and also share it with your biker freinds. Any query comment down below. I'll try to reply asap.

[@nocomments7315]

Hey, both sockets are the same right? Thank you

[@AbhishekGhoshqa]

Good and informative video. Have a few questions: 1. After installing these lights, does the check engine light on the dash come on? From your video the light seemed off. 2. The fan on these lights stick out of the socket a bit. Is there enough clearance for the steering to turn all the way to either sides? I mean when steering is turned all the way to the left, does the right suspension touch the right light fan and vice versa?

[@ridersunny7606]

Abhishek Ghosh warning lights are working fine. No sign of any malfunction. There is enough room for steering.

[@Apriliarider457]

Thnks bhai your vedio really help me a lot to install nighteye in my ktm...keep making vedios on upgrading ktm...👍

[@varunkashyap5346]

In left leght the bulb is able to only switch the low beam not the complete bulb is getting on how to resolve. I want to make Switch on both bulbs at high beam

[@ridersunny7606]

Dude well that is something i wont be able to help. My RC is 2014 model which is used to have this feature to turn on both lights as same time. I m afraid this feature is removed from recent models

[@EzaHazami]

Bro i have question. I own KTM RC200 2015-2016 models, and it is clearly said that H9-H11 socket for each projector. But seeing your video, H11 comes in pair right ? Is H11 compatible to replace H9 ? What's the effect bro ? I kinda want to change my factory halogen, but still unsure because i can't get H9&H11 at the same time. Thanks !

[@S.T.A.K.]

I had the same question and did a bit of research and bought the night eye for my RC 390. Night eye is compatible across h8/h9/h11/h16. These have similar sockets so night eye makes theirs compatible across all these with a single connector.

[@elmogus7759]

@@S.T.A.K. and does not damage the battery?

[@BogdanFKX]

​@@S.T.A.K.so I can put a night eye h11 on both beams on my rc 125 2016?

[@S.T.A.K.]

@@elmogus7759 No problems till now. And it's still working.

[@S.T.A.K.]

@@BogdanFKX I guess so.

[@shaiknafeezahmed9139]

can i get one bulb in h9 and another bulb h11 in the box for my Rc 200?????

[@ridersunny7606]

Rahil Nafeez no bro. Pair would be of same type

[@sumanthpawar5722]

Make aa ride on this at night plz I liked this video good explanation

[@Rahul-rv4jy]

Bro how to adjust height of low beam and high beam ,they told they provided a screw to adjust but am not finding that can u say how

[@ridersunny7606]

I haven't done any adjustment till date

[@rayjinlamechane7435]

how is your night eye led headlight is it still working properly??????

[@ridersunny7606]

ANKRIJ GURUNG yup working as good as new

[@shubhampatel2359]

It can be installe in rs200 ?

[@motorcyclejournals]

Hi sunny.. I have out of the topic question... How does the high beam and low beam works on ktm.. Is it the Bulb which makes difference or Projector housing is different for low beam n high beam... Or both the Projector are same only the alignment is different for high beam and low beam.. Thx in advance

[@ridersunny7606]

Smeet Sinha yes you are right, project housings are different. One is for low beam and other for high beam. That's why they've used H9/H11 instead of h4 :)

[@bindassrahul.]

Bro U put h11 on both side ?

[@ridersunny7606]

Yes

[@mr.strange5679]

What is rotating in the LED?

[@ridersunny7606]

Fans!!

[@divyamnikam8391]

no need to remove farings, I just installed as it

[@ridersunny7606]

Divyam Nikam Gud. Yes. Actually I removed it just for the video purpose as i told it in the beginning of the video.

[@pakkahuman1033]

Is tis available in flipkart???

[@S.T.A.K.]

@@pakkahuman1033 I bought it from Amazon.

[@akingrules]

does it require a separate resistor to reduce the 55-60 watt to 36w for this led unit or is it integrated

[@ridersunny7606]

vishnu kumar No. They are simple plug n play. No.extra accessories

[@sidharthyadav5571]

What about dust is it not going under the projector?

[@TheSpeedster46]

Hello bro.. How about in rain and fog....have u tested it?

[@HarishThebiker]

Nice work

[@ridersunny7606]

Harish Thebiker thanks!!

[@rahulramchandani3778]

How should I remove the socket

[@ridersunny7606]

Rahul Ramchandani checkout in video

[@pranavthakur939]

Hey bro, i have rc390 2016 model which socket type should i choose while ordering

[@ridersunny7606]

Pranav Thakur yup. But still do check out socket type its written on back of tube just to ensure

[@limitlesslyricalseven2524]

Bro duke 250 mah konsa night eye led lagega

[@omkarkhamkar9388]

Hey nighteye also has a 60W version of 9000lm and 6500k should i use that one as it will consume less power? And they also have 9600 lm version of 90w i am confused which one to go for in between these three.

[@ridersunny7606]

Omkar Khamkar higher the lumin values higher the intensity u will get. Less wattage but higher lumins is what you should look for :) High wattage will effect battery life.

[@raviray3368]

Ye bullet me fit hoga ya nhi

[@themnishshow3949]

Can we fit h11 in h9

[@udayads3590]

can i install on duke 200

[@ridersunny7606]

yes but i think H4 will work

[@StellarExplorerYT]

Bro i am seeing many varients in this lights on banggood..like 9006 h4 nd h11..which one should i buy that fits in my rc..

[@ridersunny7606]

H11. H4 is not compatible

[@S.T.A.K.]

You will see h8/h9/h11/h16 option in Amazon. It's a universal connector they are using to fit all these types.

[@abhi_official3173]

Bro can I use the old light for low been and the led light for high been???

[@S.T.A.K.]

Yes. I did the reverse for my RC390.

[@Deepakkumar-xz4ws]

Awesome video

[@PC_Dt]

Bro, by using that led light.. can we still fit the ring light i.e angel eye just like we are using in the stock headlight

[@ridersunny7606]

Del Rey why not. It has nothing to do with these lights

[@irshadnabi7191]

Kya yeh h11 led hai

[@abhaydogra1573]

awesome lights. Can i fit it on TVS Jupiter?? I mean it has H4 socket.

[@ridersunny7606]

Yes u cam easily fit in that too.

[@turnonoff]

AB. 99 No bro. H4 and H11 are two different socket types. You cannot fit H4 in a H11 socket. But since these NIGHTEYE LEDs are universal in fittings, you can. Fitting types supports : H7 LED H4 led/HB2/9003 H8/H9/H11 HB3/9005 HB4/9006. Only thing is that you've to check the 72W 9000LM where 9000 Lumens are basically illegal in our country. And on top you'll need just one LED not the pair (36W each LED).

[@vismayaswani9681]

The fans are not dusting the insides of the projector????

[@ridersunny7606]

Vismay Aswani so far no sign of such problem

[@vismayaswani9681]

Rider Sunny okk... thanks man!!

[@jeetsenn5934]

How come in high beam both the lights are on ? Is that possible after putting the night eye leds ? Please revert back.

[@ridersunny7606]

My RC390 is 2014 edition. Initial models had this feature. It even has a light switch.

[@kedardansena862]

Mujhe v magana hai bhai kisme agaye ho

[@parwezmomin8026]

Sir it is water proof

[@andrischeggetman7423]

nice vid

[@JinuMathers]

This LED bulb is 12v, right? Will it be any problem, if I use only one bulb for my high beam? To be more simple: Low-beam= Stock High-beam= NightEye LED

[@ridersunny7606]

Jinu Mathers no problem, its totally upto you. But once you will install them, you surely would add the 2nd one 😀

[@tangubagang6933]

Does it affect battery consumption?

[@thepunisher7549]

is it comfortable for 5foot 8 inches

[@mgmirajul]

Nice

[@drake9506]

Wil it fit in 2016 Rc 200?

[@Deviduttasahoo911]

Can I use them on my pulsar 220? like both of them ( one for upper and one for dipper )

[@ridersunny7606]

Devidutta sahoo why not. Just check what socket types !!

[@vishalsharma45]

Powerful light..

[@eb_reviews]

not covering the fan?

[@ridersunny7606]

RIDER SOLO no

[@eb_reviews]

Rider Sunny I used it in duke and it flooded my headlight with water.

[@shaikabdullah1354]

I have KTM 200 of bs4 model , please provide or suggest right head bulb for 200 ?

[@ridersunny7606]

Shaik abdullah you can use H4 led tube!!

[@AshwanthVr-pi5zj]

Will it suit for RC 200

[@Rahul-rv4jy]

Bro is anything new coming on rc390 2018 model or does it remains same as 2017 one?

[@ridersunny7606]

Rahul prince no idea till now

[@StellarExplorerYT]

Konse hai bhai ye h4 h7 ya h11

[@atishekka]

Hey sunny...The Kit consist of two H11 LED or any Socket type in Pairs....and the RC390 got H11 and H9 so how come you fit H11 in H9 Socket....??? Is it H11 Compatible with H9 socket..???

[@ridersunny7606]

Absolutely...that's what I have shown in this video. You can watch it again :) Both are H11.

[@atishekka]

Rider Sunny....Correction Made - Right Projector Got H9 Socket & Left Projector Got H11 Socket....Really interesting that they are compatible because it shouldn't be because H9 female socket got 2 separation lids between the power contacts & H11 got 1 one long lid between the power contacts....The only way this is possible is by removing the separation lids between the female socket contacts so that it can receive either H9 or H11 male.....The outcome - I am pretty sure that the NightEye LED you got don't have separation lids between their power contacts....Haven't seen it but i am damn sure....

[@ridersunny7606]

Atish Ekka Ya i know rc has H9 for lower beam and H11 for higher. Even wattage is different on both projector. I researched alot before purchasing and conclusion was H11 are compatible with H9.

[@Rohit-jc7no]

Are they waterproof?

[@ridersunny7606]

charizha yess

[@soumalyadas5556]

In rc one socket is h7 and another one h11 ....so how did u order both in one time????

[@ridersunny7606]

Soumalya Das h9 or h7??. I ordered pair of H11. H11 tube is compatible with H9 socket

[@siddharthkumar2618]

I have installed these light but its not effective for high beam

[@chitrarthkaran2794]

Is this led comparatable with cars

[@ridersunny7606]

chitrarth karn H4 types will be compatible.

[@virajmishra6018]

after how many days was these lights were delivered to you? (via AliExpress)

[@ridersunny7606]

viraj mishra minimum 15-20 days

[@varunkashyap5346]

Does it spoil battery life ?

[@ridersunny7606]

So far nothing!! 72W (36W each) combined compared to stock 120W combined(65+55). That means less battery drain

[@Ian-ny6ux]

@@ridersunny7606 really helpful information bro. Thank you

[@maheshmahi2023]

are they changing the color or constant single color is glowing??

[@ridersunny7606]

No..they aren't RGB leds. Color temp(6500k) is consistent.

[@aartimohite6321]

Nice night

[@elardartamus4488]

Is it water proof? Did u test it when wet?

[@ridersunny7606]

3yrs since install. Been through wash, rain, dust..working fine so far..!! Now many new options are available with brands too

[@NalinRaj]

It can be done on Pulsar rs200 also? Is it the same method?

[@ridersunny7606]

Probably. Method is same. Just checkout your projector socket type.

[@parvez0564]

Can we install these led lights in maruti Swift...

[@ridersunny7606]

Parvez A K Khan Yes. You need to install H4 ones

[@SinghBrar1]

Rider Sunny bro Chevrolet cruze mey konse fit hogi... means model h4 ja h11 ja or koi plz tell me

[@ridersunny7606]

Rashpinder singh i think H4. But do ensure before buying. Checkout your car manual for same

[@samarthrhegde]

My bike is 2017 model with AHO. So is this light good in the morning to use as pass by signal?

[@ridersunny7606]

Samarth Hegde High beam is very effective. Vehicle in front definitely gona give u pass on one flash. I've tried this thing out :D

[@samarthrhegde]

Rider Sunny can you upload a video? I just wanna have a look. Would be a great video, there is none KZbin

[@Pushkar2228]

Am i able to install these in RC390 2018? Model?

[@ridersunny7606]

Pushkar Pagare why not!! :)

[@shamstabrez8011]

how to install neight eye led light in HONDA CB HORNET

[@dennisabraham1289]

Nice video. Would these be compatible with Fazer 150 ?

[@JH09SUMIT]

I would not suggest these on reflector type headlights

[@sumitkamboj6522]

Ye led dc par kaam karva ? Sir

[@ridersunny7606]

Sumit Kamboj technicaly yes. But u don't need to mess in that. Its.simple plug n play

[@hanuraghu917]

Is same can be use in Pulsar AS 200..?

[@ridersunny7606]

Raghu B N i cant same bcoz i don't know what type of socket type AS 200 comes with. But do check out your projector socket type. All socket types are available. Installation mechanism will be bit same.

[@hanuraghu917]

My As 200 has H4 socket.. is there any difference in brightness between H4 and H11..? Is this possible to instal H11 in H4 ?

[@ashutoshkhess8488]

These bulbs are available in H4 size too...but i m concern about dust particles getting inside,as as200 has a rubber protector to protect against dust so inorder to install these you have to ditch the rubber protector. Or you can go for fanless nighteye models.

[@ridersunny7606]

Raghu B N they are not same bro. H11 and H4 have different socket types and H4 bulbs have high and low beam elements if its a halogen and an extra strip of led if its a led bulb whereas H11 do not have. Brightness has nothing to do with socket type. For brightness lumins values counts. Higher lumin values will have more brightness. One thing more in H4 led tube there is an extra led smd for high beam so in that case a bit more intensity u'll get. I hope i have cleared your doubt.

[@ridersunny7606]

Ashutosh Khess when we install these tubes the bulb part gets completely sealed with the rubber washel it have and the fan part remains out. Leds are attached to metal heat sinks. It doesn't blow air inside reflectors or projectors. They are just to keep tubes cool by quickly dissipating heat from heat sinks. They are waterproof as well. Fanless are available too but tube's life is always a question.

[@motojaymn4131]

I did not know those fairings came off as one piece

[@0609kenji]

Bro, I have got a 2016 model. What's the price of a pair? And does one stay as a low beam and the other as a high?

[@ridersunny7606]

Mike Kenji Barman it cost me around 2k INR. Yes!!

[@gulshankumarchoudhury9527]

Very informative video, I wanted to install them but it's not available right now. Just one question though, what is the wattage of stock light in ktm rc 390, does this light impact batter life.

[@ridersunny7606]

No felt so far. Infact my KTM is 2014 edition, still runny factory battery. Its been more than 1.6yr that i have installed these tubes and still working as good as new

[@proskilled6485]

Bhai road par test btaona

[@嘟嘟-h4c]

The original bulb is H ??

[@ridersunny7606]

H9 H11

[@hirakdeka1492]

Mujhe light ka model nmbr bolo... Mujhe vi chahiye

[@limitlesslyricalseven2524]

I mean h kitna lagega anh idea

[@mayaanksingh8811]

Please share buying link if it's available online.

[@ridersunny7606]

Checkout description for the link

[@parteek4313]

Will it fit on rc390- 2016 model?

[@ridersunny7606]

Parteek Pabbi why not bro, i don't think there would any difference in projector spec in old and new models.

[@parteek4313]

Rider Sunny ok bro cool..what abt the light angel, is the effectiveness is same as the stock projectors. I meant the range of these night eye

[@ridersunny7606]

Parteek Pabbi more effective than stocks because of high lumin values. In the end of the video i have shown comparison picture.

[@ridersunny7606]

Parteek Pabbi please support my channel by like share subscribe if you think i am doing good work :)

[@amarkonwar6972]

Is this the brightest of all leds

[@ridersunny7606]

Amar Konwar so far...but reliable too!!

[@shibanshughosh573]

Hi sunny can it be installed on duke 200 ?

[@ridersunny7606]

shibanshu ghosh I think yes. H4 led tubes will surely work.

[@doveryen]

Are you sure cob chips can produce 9000 lumens

[@AMA4NK]

Bro can we fix them into a bs4 model also

[@ridersunny7606]

Amaan Khan is there any change in bs4 model projectors??

[@AMA4NK]

Rider Sunny no change in projectors but in bs4 we can't able to turn of the head light

[@ridersunny7606]

Amaan Khan that thing has nothing to do with installation. Projectors must br same. Swtich option was removed from RC in 2016. But do check socket type.

[@grv2994]

mast light

[@gagandeepsingh3060]

Is it a pair of 2 or we have to buy 2

[@ridersunny7606]

Sardar Gagandeep Singh Yes they come in pair

[@spencerjerome4070]

Bro! Is it bright enough ?

[@ridersunny7606]

Spencer Jerome very bright

[@spencerjerome4070]

Where are you from?

[@ridersunny7606]

Chd

[@SinghBrar1]

Rider Sunny bro kya essey bi jada bright wali led mil sakti .jese yej to sirf single light 36w ki ...single mey jese 60w ki bi loi aati ...dono light 120w wali koi led h

[@rahulambady7218]

Link ???

[@sumanthpawar5722]

Price

[@ridersunny7606]

it will cost somewhere around 1500 these days

[@bratofficials8147]

Hi, sunny are you from Delhi?

[@ridersunny7606]

Auto High i am from Chandigarh

[@bratofficials8147]

RiderSunny how is your long term experience with the led lights?? And what is the price?

[@ridersunny7606]

So far lights are doing good. Very bright compared to stock. Both projectors heavily lit-up the road. So High beam is hardly required other than dipper:). Low beam is enough.

[@bratofficials8147]

Rider Sunny thanks a ton man! Can you share the price and further details from where i can get this. I will be very thankful to you friend

[@ridersunny7606]

Auto High purchase link is in the description.

[@crazydonrider9752]

I need this light bro

[@kunalll777]

How much?

[@bibhabbag1]

Bouncing the light off a wall has no real worth as its obviously going to seem bright.. Do u have any night ride in absolute dark and in city night ride vids with these bulbs?? That wud be helpful.

[@ridersunny7606]

chandra kant its not like that. These tubes illuminate much much better than normal halogens.

[@FamousInsane]

Did you paid any custom duty bro?

[@ridersunny7606]

FamousInsane nope!! :)

[@marveljohn783]

What shipping did you opt for ????

[@ridersunny7606]

Marvel John free one

[@marveljohn783]

Can you please share the link to specific seller

[@ridersunny7606]

Marvel John it's in the description

[@ganjaextravaganza]

Are bhai reliable hai ye? Kai logo ki kharab ho jaati hai, suna hai?

[@ridersunny7606]

Bhagwa Pepe its almost 4 months that i am using it. No problem so far.

[@aditya6630]

How do u on both the lights at once

[@ridersunny7606]

Initial models of 2k14-15 used to come with light switch and had this feature. On high beam both projectors get turned on. New models lacks this feature.

[@aditya6630]

Rider Sunny i hope that the next model will have this feature

[@mr.strange5679]

Rider Sunny 2k17 model also has the feature

[@JJSS90]

Super bright , how much do they cost??

[@ridersunny7606]

japanJot Singh suri 2k

[@JJSS90]

RiderSunny ok thanks, please share if you have any link.

[@ridersunny7606]

From AliExpress. Here is the link: Super Bright Car Headlights H7 LED H4 led/HB2/9003 H8/H9/H11 HB3/9005 HB4/9006 Auto Bulb 72W 9000LM Automobiles Headlamp 6500K s.aliexpress.com/EBVR7jq6?fromSns=Copy to Clipboard (from AliExpress Android)

[@thedarkglove]

820th like brw

[@ForTheDailyRide]

How much did you pay?

[@ridersunny7606]

Ashok CN near about 2k

[@saikatdas9122]

You didn't install the rubber cap, the water will go inside the headlight while washing. Be careful.

[@ridersunny7606]

Saikat Das there isn't any rubber cap for lights in rc. Tubes comes with socket rubber grip which keeps dust and water entering projectors. Led tubes are water resistant too.

[@joydebdebnath2811]

LED lights aren't good for other s on opposite side

[@ridersunny7606]

True until u r on high beam. Low beam doesn't effect oncoming traffic.

[@AmritpalSingh-hu4mr]

kya ye light RS200 me fit ho sakti

[@ridersunny7606]

Definitely. Checkout your projector socket type.

[@shubhampatel2359]

Rider Sunny how to check the projector socket type ?

[@ridersunny7606]

Shubham patel that's written on the halogen bulb itself on front or back. Check that out on your vehicle

[@shubhampatel2359]

Rider Sunny thank you so much rider buddy... Gimme ur fb profile or Insta i will follow u there

[@bhupindersaini1154]

Ho jaunga veer rs200 same projector ha