How to Install LED Strip Lights

[@brenden9758]

Finally, a good LED installation video. Thank You.

[@Flexfireleds]

Thanks for watching!

[@PeterBeatty-su8ux]

What about if u got 5 shelves how do u connect all together ,

[@Flexfireleds]

Depending on how far away the shelves are, you can run wire between them to make parallel connections. We'd need to have more details to better assist you. Please send us an email at [e-mail] and our team will be happy to assist.

[@jaysgood10]

Learn to spell.

[@PeterBeatty-su8ux]

@@jaysgood10 is that all u got really get a life sad manin 😜

[@quinnrssll]

Awesome video. Perfectly explained all of my questions with LED Strip installs

[@korbendallas2741]

Great work! This is great!!!

[@josepheustaquio5544]

Super professional... checking out your products now

[@Flexfireleds]

Thank you so much, Jospeh! We are sure you will be happy with the result the projects you create with our lights.

[@lynnreese2373]

Hi Can I power 100 MM of 24 volt solid strip light with a 12 volt power source?

[@JamesDavid-d1s]

How can solve this problem I bought 2 stip light's 1 for my tv 1 for my chair after connect it separately the remote start to on and off the other

[@JamesDavid-d1s]

How can I solve this problem I bought 2 strip lights 1for my tv other for my chair after Connecting separately one remote start to on and off the other when functional

[@danielg2754]

Thanks for the video!!!

[@dillonle4034]

If I want to install different locations I just need to buy additional IR receiver and adapter right?

[@Flexfireleds]

Yes, for a new location, you will require a new power supply and a new controller. Despite the location being in a different part of the house, our Leona Smart Home system (www.flexfireleds.com/leona-smart-home-lighting-system/) enables you to control these locations together or independently.

[@Consciously_Humble]

Question if I wanted to use a little bit at first just until I found out some Ideas would I be able to reconnect it to the strip I already have up ?

[@Flexfireleds]

Absolutely, you have the option to trim the LED strip at the designated cut marks and reattach it using our solderless connectors. Alternatively, you can repurpose the remaining strip in a new project, in which you'll need a power source and a controller.

[@chuanyinruan]

very professional!

[@ipaintpro]

Equality is savage

[@Flexfireleds]

Thank you so much! We strive to create helpful and valuable content for our audience and customers.

[@surajpasuparthy]

hello the power supply is far from where the LED strips are. So how do i extend the length of the wire coming out of the LED strips?. which wire do i use and is there a connector to connect the 2 wires together.?

[@ashleywynn4923]

Call them. It depends on how far then you may also require a stronger transformer. They sell it all.

[@Flexfireleds]

Hi @surajpasuparthy ! You can use low-voltage wire to span the distance between the power source and the LEDs. The appropriate wire gauge can be determined based on the distance you need to cover from the power source to the lights and the load of the LEDs.

[@normabishop2693]

WOW! I had no idea of the incredible features/modalities of this! Excellent presentation.

[@Flexfireleds]

Thank you so much, we really appreciate it! Stay tuned for more quality content to come!

[@VP411Designs]

What is the best plan to build out an entire ceiling with the plastered in LED RGB plus W setup? Is there a Maximum length for the LED strips to keep best quality and also what is best rules for keeping lights cool and long durability ?

[@Flexfireleds]

Hello @VP411Designs. Our RGBW lights have a max run of 32 feet to keep the best quality of the light. To keep the lights cool and ensure a long lifespan, it is always ideal to make sure you are using aluminum channels to dissipate heat. Our RGB+W Lights come with a 15-year warranty by default, meaning that durability is not a concern, but paired with aluminum channels you can extend even more the lifespan of the lights. Every single project is a bit different so we like to learn more about the setup before we recommend something. You call us at [phone] or email us at [e-mail], and we can help you with the best plan for that ceiling!

[@VP411Designs]

@@Flexfireleds will be reaching out soon. Thank-you.

[@VP411Designs]

Is that 32 feet to a receiver? And from receiver to hardwired to switch/wall etc. I wish there was a diagram illustration to show the flow of how the setup is with 20/6 wires recommend for the RGB/w tunable @@Flexfireleds

[@brandonmorris901]

I had a small facelift done to our kitchen. There used to be some low voltage lighting under the cabinet, but it got lost in the reno. The black/red low voltage wire that runs from the wall light switch to under the cabinet is still there. Can I use wire nuts or something similar to directly hardwire a 12v led strip without a small controller or transformer? Just a basic strip that doesn't change colors or dims. The LED strip I'm looking at already has the red/black wires so no soldering would be needed. Do I need to have a ballast for something this simple and low volt, the length of the run is 84".

[@Flexfireleds]

Hello there, Brandon! Yes you can. If it can supply enough wattage for the amount of light strip you will use, it is doable. For more information, assistance and even a quote for your project, you can contact us: Phone: [phone] Email: [e-mail] We are available Monday through Friday 6AM - 4PM (PT).

[@IkechukwuUdechukwu-j4u]

How do I install it without a sensor motion

[@VP411Designs]

This is awesome thanks Brett for showing step by step. Only wish there was more information on what the steps are and best practices for hard wiring multiple LED strips to one receiver/controller? So for example use case kitchens have LED strips under the cabinets with multiple location changes or large spaces in between each strip with one unified control. How was this hardwired and setup to work in unison? Can you demo with steps like this video?

[@Flexfireleds]

Hey @VP411Designs The Leona controller is equipped with screw terminals capable of accommodating up to three 20 AWG wires on each terminal, facilitating multiple runs. You have the option to join all the wires together to form a single wire. Using pliers, you can attempt to reduce the wire thickness to fit it into the screw terminal. Alternatively, you can use a thicker wire, such as 16 AWG, extending from the Leona controller and branching out to connect all the different runs, creating a parallel connection. You can check this video as a reference: kzbin.info/www/bejne/gYvFg2uHgsefa68si=tRHUqLlnP_lN4xjz

[@Daniel-h4j3t]

I was thinking about doing a RGB for a office or bedroom

[@Flexfireleds]

Nice idea! RGB lighting can elevate and personalize your office or bedroom experience. Our team of experts is ready to support you every step of the way, contact them now at www.flexfireleds.com/ask-us-a-question/

[@claudiodovalle9925]

If there are more shelves. Should i do a parallel installation comming out of the controller, or do a seriial installation?

[@Flexfireleds]

Good question! If the shelves are close to each other, you can hide the wires, and you do not exceed the maximum run length of the LED strip, doing a connection in series is beneficial. If the shelves are far away from each other and/or the total run exceeds the maximum run length of the strip, it is recommended you do a parallel connection.

[@javierronin1]

Do I always need a controller? I purchased a BTF WS 2811 (24v) and if I connect it to the power source, only the first section of the strip lights up. It stops after the first place where it could be cut.

[@Flexfireleds]

It looks like you are using digital LED lights. If that is the case, then yes, you would need a controller for the lights.

[@diannehussey1334]

Our strip came without leads on the ends. How do we connect the leads to it?

[@Flexfireleds]

Hello there, Dianne! You can solder extra wire to the copper pads or use our solderless connectors: www.flexfireleds.com/wire-and-strip-connectors-and-accessories/. kzbin.info/www/bejne/omWlmImYibiHprs.

[@amitjadva]

So you don't need a LED Driver?

[@randymitchell2006]

Awesome video. Thank you for breaking this all down. I do have 1 question that no one seems to truly break down. I have a job and they want to use RGBCCT leds with a controller to integrate with Google. But they also want to have a manual standard 120v dimmer switch in the wall. Is this possible and if so what is required to make this work?

[@Flexfireleds]

The RGB CCT allows you to turn the lights on or off using a standard On/Off switch. However, for controlling and dimming the lights, you would need to use either the smart app or Google Home integration as these features are not available through the switch. The lights will remember the last setting they were on before being turned off.

[@surrealartisan4625]

@@Flexfireledsare all these LED strip connecting wires safe to run behind walls? I’m trying to wire COB led’s but I’m not sure if the wires are safe to run behind sheet rock. Any suggestions??

[@schomesolutionsllc.7199]

How can I order or talk to some one? Mike C

[@Flexfireleds]

Hi Mike! You can get in touch with our team through: Website Chat: www.flexfireleds.com/#hs-chat-open Phone: [phone] Email: [e-mail] Website Contact Form: www.flexfireleds.com/ask-us-a-question/ We're here to help!

[@roebucksadventure]

how would I connect the led strip lights where I want to go from the outlet to the ceiling with no leds and only have the led strip lights showing on at the top of the ceiling. So basically trying to figure out how to have an extention seciton with no LEDs from the outlet near the floor to the ceiling.

[@Flexfireleds]

You can use low-voltage wire to span the distance between the power source and the LEDs. The appropriate wire gauge can be determined based on the distance you need to cover from the power source to the lights and the load of the LEDs.

[@sakran2975]

I do t think I got that colored cored.

[@Flexfireleds]

Hello @sakran2975. To provide you with a more accurate answer, could you tell us additional details about your setup?

[@richardmunsey268]

Very expensive, I was quite surprised. 30 feet of lights $980!

[@matthewbaxter6992]

I bought 65 square foot on Amazon for $37. Another $20 for hardware. It does all the same features.

[@matthewbaxter6992]

@PRIMEballer_17 Nice score! These people are out of touch or looking to scam.

[@Flexfireleds]

Hi there! All our lighting products are built to last; we've invested in quality materials and engineering to ensure longevity and reliability. 💪 Just to clarify, that price tag belongs to our 98ft product spools!

[@andreweccles8130]

Soddering 🤔

[@jaywalkercrew4446]

Easy

[@Coolvideos-w4h]

Dang

[@JamesDavid-d1s]

How can I solve this problem I bought 2 strip lights 1for my tv other for my chair after Connecting separately one remote start to on and off the other when functional

[@JamesDavid-d1s]

How can I solve this problem I bought 2 strip lights 1for my tv other for my chair after Connecting separately one remote start to on and off the other when functional