How To Install Moducase Lighting | Sixth 110

[@masaka254]

Man I just wanna leave a comment to express my gratitude. I just got my Moducase 2200 unit and their instructions are quite confusing, thank you so much for showing how everything is assembled.

[@thejediknightswatch]

I’m glad I could help! Thank you so much for watching and for the kind words!

[@BertL1]

Super hint about the zip ties & sticky mounts to keep the cords and connectors hidden at the top. I was going to try gaff tape, but zip ties is far more elegant and will last forever. Thanks for the videos - it sure makes things a lot easier to understand than the PDF instructions.

[@thejediknightswatch]

Thanks for watching!

[@BertL1]

@@thejediknightswatch Always enjoy you on your own channel, so keep that up, as well and as when you are a guest or mentioned on other channels from time-to-time. I’ve had my silver/white ModuCases (1 set of 4 sixth110, 3 sets of 3-high DF120) paid for and on order for over 16 months. Finally on Monday received notice the UPS labels have been made at their distributions center here in California. So I should have them soon when I can get my sixth-scales, Delorean V1 and new JazzInc 1966 Batmobile out of storage and on display where they belong - at last! Thx again.

[@TheSmidtdog]

So you don’t to pay the full amount up front

[@sabin23]

The power supply supports up to 6 case lights? I’m a little confused, I got the 10amp power supply but they only gave me a 3 prong attachment. Is there a 6 prong plug attachment?

[@BigBredaCollectiblesReviews]

I’m binging all this videos!

[@thejediknightswatch]

You tha man!💯

[@GTinez23]

I finally got my sixth110 cases in. This was super helpful! Thanks for doing these videos!

[@thejediknightswatch]

Your welcome! Glad it help you!

[@OneSixthFigureFocus]

Evergreen 🌲 Video for the win! ⭐️⭐️⭐️⭐️⭐️

[@thejediknightswatch]

@@OneSixthFigureFocus evergreen!??🤣

[@TheGentlemanWake]

Hey man, so I'm waiting on my Sixth 110s to arrive soon and I'm hoping to use my soap reactors on my figures to have the LEDs lit. I'm assuming running the wires for each figure through the same hole where the lighting strip is wired from is viable? How hard is it to get behind the cases once built? Are they very heavy? Unstable? Did you leave a gap behind them? Also, really curious to see what it would be like to paint the back panels of a moduspace with Vanta Black and have 99% absorption of the spill light rather than the current black paint which is pretty reflective.

[@thejediknightswatch]

It’s not too terrible to get behind the cases once they are built unless you already have figures in them. If empty you can slide them out from the wall to get behind and then push them back.

[@andrewcalica2570]

Hey, bud! I recall you saying that you were given a few different LED strips than you ordered. I think Warm light instead of Pure white. I’m not sure if you said they were gonna send you the right ones and that you could keep the mistaken ones. If so, I’d be willing to buy them from you if you didn’t need them. I bought a Moducase from Sideshow and all they had was the Spotlights. I’d want my setup to be similar to yours. Either way, thanks for hearing me out.

[@thejediknightswatch]

Hey hey! I received only the LED Pure white lights so I don’t have any extras. I know Jables received the wrong color though!

[@art1607]

Hi my man may I know how to clean the wood board from bottom I don’t know why mine is kinda look likes dusty looks 😬I wiped with Paper tower it still look dusty if you have any suggestions let me know brother 🔥

[@thejediknightswatch]

I would use a vacuum attachment with a soft brush or a lint roller. Paper towel will leave debris behind

[@Danoby2]

Oh? Looks like your in trouble.. Moducases are a dangerous path. You always want more, and more and more.😝 Great video.👍

[@thejediknightswatch]

You are right sir lol. I thought I would have a ton of space but it’s already filling quickly! I wouldn’t mind order the DF series for my quarter scale but dreading the wait time. Thanks for checking in!

[@daniel_sc1024]

"You always want more, and more and more." That's a given with this hobby.

[@thejediknightswatch]

@@daniel_sc1024 it’s a slippery slope lol

[@daniel_sc1024]

@@thejediknightswatch In my case its not a slope but a cliff. 🤣

[@thejediknightswatch]

@@daniel_sc1024 😂

[@terrycorter6162]

Have you installed any of the new spotlight style lights? I received my case today and it came with 4 of them

[@thejediknightswatch]

No I only did the strip lights as I thought it would give more of an even light throughout the case.

[@TheTitanofDC]

Hello! What are the command strips used at 9:10 called?

[@thejediknightswatch]

@@TheTitanofDC here you go! a.co/d/6A79tu2

[@TheTitanofDC]

@@thejediknightswatch thank you my man!

[@shaunschuller3282]

Hi, I'm finding your Sixth110 how-to vids very helpful thank you. Just bought four from Sideshow to set up side by side and stacked 2 high. The US retailer Sixth 110's for whatever reason only available with four spotlights vs. the lightbars like yours. I think I'd prefer the light bars but before I buy those from ModuCase direct, I am wondering if you think it would be worthwhile if I'm setting up in a fairly light room. The illustration is to have two of the four spots in the back upper corners of the sixth110 facing forward and two in the front upper corners facing back. I am concerned the back ones will shine in eyes depending on viewing angle and this setup may leave a dead spot in the middle of that rectangular case vs. light bars which seem to evenly light it all the was through. I am considering doing four facing backward along the top front edge but the middle two would leave a cable management problem since the sixth110 does not have a middle rail across the top as the it would with two sixth55 joined side by side. Also the Spots are installed with little screws to hold them in place vs. double stick so hard to try it out without leaving screw holes in the ceiling of the assuming I switch to lightbars. Thoughts?

[@thejediknightswatch]

I would always go with the light strips. They seem to be the best in any type of room!

[@shaunschuller3282]

@@thejediknightswatch Thanks, I heard it takes forever getting anything from ModuCase directly. I wonder if I can source similar light bars and power supplies quicker (and possibly cheaper) through Amazon or such vs buying the lightbars from Moducase. Thoughts and would you mind sharing the measurements of how long your light Bars each are and what color warm/cold white?

[@paulbuoniconti5275]

Did your case come with white backing? Mine came with black on one side, white on the other. Looks horrible unless I stack another one on top and get two sided black boards.

[@thejediknightswatch]

Yeah mine were black and white as well. I believe it is so you can reverse the backdrop if you would like. My sixth series were all black.

[@shaunschuller3282]

@@paulbuoniconti5275 Yes mine too. I'm not a fan of that either.

[@weirdowhoa]

Hey @TheJediKnightsWatch, Im curious how you are plugging these in. Im assuming you had 4 plugs to socket to an outlet. Are the outlets behind the case or to the left or right? If behind, how far out do you need to have the moducases? Thanks

[@thejediknightswatch]

I have a power strip next to the case that is plugged in behind to an outlet. My case is about 3 inches from the wall.

[@mand0253]

How did you end up powering your lights? I noticed chaining 4 cases together severely weakend the lights as the chain grew. Even chaining two cases together made one case much more dim than the other. So I'll be running each case to its own power supply to fix it. Kinda bummed about that. Otherwise love these cases.

[@thejediknightswatch]

I have the larger power adapters that can power up to 6 cubes.

[@mand0253]

@@thejediknightswatch I do as well. Did you chain multiple sets of lights together? I'm trying to figure out if this is expected behavior of the leds or if mine are defective basically. Using the upgraded power supply the lights lose power the more I connect to the three way split.

[@thejediknightswatch]

@@mand0253 I chained 4 together at a time. I don’t have any issues.

[@sabin23]

@@mand0253 Do you still have this issue? I have 2 chained currently. One is brighter than the other. I have 4 more lights on the way so I’m curious if it’s just better to have an power supply adapter for each case to maximize brightness.

[@mand0253]

@sabin23 I did still have the issue. I couldn't connect more than two lights together. So one case by itself. I ended up using two power supplies for 4 cabinets stacked together. Three went to one power supply and the last on its own. Hope this helps!

[@joshuaevanepstein]

Thanks so much for your ModuCase videos. Regarding the LED strips… In my setup, I’ll have 3 cases horizontally and 4 vertically (making it 12 cases in all). If I’m not installing the Plexi sides - in order to keep each level open to give me more room - can the LED lights connect from the first case on the left, to the third case on the right, and then have the power cord coming out the bottom of that third case on the right connected to the larger, 3-prong adapter? And, then do the same for each of the 4 levels? Thanks,

[@thejediknightswatch]

You can but I would get the bigger power adapter from Moduspace. I think it can power 8 cubes.

[@joshuaevanepstein]

@@thejediknightswatch They make a larger on than the 10amp ones? I got a lot of those.

[@thejediknightswatch]

You may have to reach out and ask them. All I see on the webpage is the 10amp. Not sure if that’s the bigger one or not.

[@joshuaevanepstein]

@@thejediknightswatch I don’t know if this is even possible, but would you happen to know anyone who lives in New York City or its surrounding areas, that wants to make extra money helping putting these cases together? I’m so bad at this stuff. For starters, it would 12 x Sixth110 cases. Then, 17 matching cubes another time. Please let me know if you or anyone you know might be into doing this. Thanks!

[@thejediknightswatch]

@@joshuaevanepstein you could ask FabsFigures!

[@jcrosser31]

How do you install the spotlights and why won't they turn on?? I plug it in and nothing. My didn't come with the strip lighting.

[@thejediknightswatch]

Unfortunately I haven’t ever installed spot lights. I’ve always liked the even lighting effect of the strips. I would reach out to moduspace directly for this. They should also have directions on their site.

[@theblevsreview]

Can you have the sixth110 vertical as well as horizontal?

[@thejediknightswatch]

No but you can buy Sixth98 cases which are the same size but vertical.

[@wongcombo3172]

Hey there. I know this is an older video, but do you know how many Sixth 110 cases you can stack? I saw you have 4 and that's what I want to do as well but is it within the weight limit? Thanks!

[@thejediknightswatch]

Moducase sold this as a wall combination set, so yep it’s ok to stack 4 cases.

[@hattedsandwich2415]

Where did you get those clips that slot into the channels? They're really slick :)

[@thejediknightswatch]

They come with the moducases😃

[@hattedsandwich2415]

@@thejediknightswatch I should have my eyes checked because I didn't see mine :O I'll look again!

[@raven_munroe8636]

Hi, i just received my Moducases and noticed the LED strips have a piece of cord on both side of the strip. I understand it's for countinuous row, but how are you supposed to "close" the row? Does the last LED-strip just have a cord sticking out? What if that touches a metal frame? Doesn't that cause it to short circuit? Should there be a cap or a hat etc to the last cord that doesn't connect to anywhere?

[@thejediknightswatch]

Yeah it just hangs out the end of the light strip. You can zip tie it to the ceiling of the Moducase if you want

[@NoOneRid3r]

Nice vdo! can i ask you something? I would like to know that how long the wires/cable is (From from psu to led strip) I saw you used the long one which connected to led and run to the plastic rail, did this one came with the box or you need to additionally buy for it? thank you :)

[@thejediknightswatch]

It comes with plenty of cable and I didn’t need to buy anything.

[@NoOneRid3r]

@@thejediknightswatch Thank you very much

[@1515cci]

Finally got my cases a week ago. Thanks for this video as it gives me more of an idea on how to install the LEDs in mine. BTW, do you have a link to those zip tie mounts you used?

[@thejediknightswatch]

Congrats on getting your cases! Thanks for watching! www.amazon.com/XHF2018-Adhesive-Holders-x19-5mm-HS-101S/dp/B07M69LK65/ref=sr_1_2_sspa?crid=AS30B851BAPI&keywords=zip+tie+anchors&qid=1696361025&sprefix=zip+tie+%2Caps%2C158&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

[@Alpha_2288]

My sixth 110 didn't come with any LED bars, where can I get these ?

[@thejediknightswatch]

They come in a separate box, but should have been in the same shipment if that’s the option you selected. I would reach out directly to moduspace.

[@NickMartelli]

Can you post the link to the zip tie stickies?

[@thejediknightswatch]

Here you go! XHF 3/4" Strong Back-Glue Self Adhesive Black Cable Zip Tie Mounts 100pcs with 8" Zip Ties, Screws, UV Protection Outdoor Sticky Wire Fasteners Cable Clips Management Anchors Organizer Holders Squares a.co/d/38Zmdr6

[@daniel_sc1024]

You'll have to do another collection vid when you have them all constructed and figures in place. 😁

[@thejediknightswatch]

For sure! I’m finding it difficult to get the figures where they all look good together. It’s a lot different than just a couple in a detolf cube lol

[@Hokagebam]

How and do I have to use the 3 way head?? I'm here totally lost with it.

[@thejediknightswatch]

3 way head?

[@Hokagebam]

​@@thejediknightswatchty for replying! I was able to figure it out. Its like a 3 head split optional use. I thought I had to hence my confusion.

[@timothydickinson1825]

Do you still have the link for the zip ties?

[@thejediknightswatch]

Here you go! a.co/d/3O1XGij

[@timothydickinson1825]

@@thejediknightswatch thanks 🙏🏾 and great content too bro

[@joshuaevanepstein]

Thanks!

[@VanBeany]

Thank you!!

[@thejediknightswatch]

Your welcome!

[@iambobbyray]

Those hanging zip ties are a great idea 👌

[@thejediknightswatch]

Right!? I never even knew they existed lol

[@chill5045]

What is the official name of the hanging zip tie mounts?

[@thejediknightswatch]

@@chill5045 XHF 3/4" Strong Back-Glue Self Adhesive Black Cable Zip Tie Mounts 100pcs with 8" Zip Ties, Screws, UV Protection Outdoor Sticky Wire Fasteners Cable Clips Management Anchors Organizer Holders Squares www.amazon.com/dp/B08F77YVYB/ref=cm_sw_r_cp_api_i_KPZ7D6M17SK39B9VSB2R?_encoding=UTF8&psc=1