How to Install Mounting Block to existing siding for new water valve.

This video is about Installing Mounting Block to existing siding. Getting ready for a new Tesla.
Malco SRT2 Straight Handled Siding Removal Tool:
amzn.to/2LQirVN
homedepot.sjv.io/jdzva
JobMax 1-1/8 in. Multi-Purpose Steel Plunge Cut Blade :
homedepot.sjv.io/JPLzr
amzn.to/2Udo8Cy
Multi-Tool with Tool-Free Head:
homedepot.sjv.io/G90bV
amzn.to/2JeKpcS
Builders Edge 130130003085 Mount, Clay:
amzn.to/31jKDah
homedepot.sjv.io/5JAVD
"As a Amazon & Home depot Associate I earn from qualifying purchases that support this channel.”
Special Offer
Tesla Referral Program : ts.la/ray11990
You and anyone using my referral link can now earn 1,000 miles of free Supercharging with the purchase of a new Tesla car. Earn a $100 award after system activation by purchasing or subscribing to solar panels.
Thanking you for supporting my KZbin channel by liking, subscribing and clicking the bell icon for notification of future videos. It really does make a big difference and also please share my video links.
Twitter: / studiorayhd
instagram: / studiorayhd

[@davidramey7186]

This is the exact video I’ve been looking for but had to go thru countless results to find even though most of the words in the title are what I’m searching for Thanks for this

[@DIYRAY]

So welcome 🙏🏽

[@martywinter7399]

Thanks, moved from the West Coast to the East Coast and I’ve never worked with vinyl siding before. Great share

[@DIYRAY]

Thanks for your comments. Please remember to subscribe and like the video.

[@matthewharnly6435]

Thanks for this video. It was exactly what I was looking for to give me an idea of what it was going to take to install a power box receptacle for our back-up generator.

[@DIYRAY]

Thanks for the comments. Please remember to subscribe and like the video.

[@billybop17]

Great job

[@aenimosity7]

Thanks Ray! I'll be doing this this weekend and this is a great help

[@DIYRAY]

Sean Fredrickson thanks for the feedback and please remember to subscribe to channel

[@silveyfam]

Great job, Ray! I learned something new today because of you!

[@DIYRAY]

That Dude thanks for the feedback and please remember to subscribe to the channel

[@clownpocket]

That was a good job. I came here trying to figure out how to mount some doorbells over vinyl siding using some kind of block.

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video.

[@kimberlyallmann2561]

Thank you so much! This was very helpful.

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video.

[@roark1138-]

Thanks! Super helpful video.

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video.

[@reefer686]

Thank you for the video!

[@DIYRAY]

My pleasure!

[@jimsego172]

Thanks Ray, great video!

[@DIYRAY]

You are welcome 🙏🏽

[@BC27277]

Thanks guy. I am doing this today. Really helpfully

[@DIYRAY]

Thanks for the comments, please remember to like and subscribe to the channel. Good luck 👍🏽 with your project.

[@gitup73]

Nice job. A lot better than just crushing the siding by just being lazy screwing the bibb right to the siding.

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video.

[@rict.4938]

This was awesome man, I'm about to do this very same thing in about an hour. Thanks

[@DIYRAY]

Thanks for the feedback and please remember to subscribe and like the video.

[@robantillon1993]

Great video streight to the point keep them coming.

[@DIYRAY]

Rob Antillon Thanks for your feedback and please remember to subscribe to the channel.

[@EasyLiving8]

Thank You Sir, for taking the time to do this EXCELLENT VIDEO, please stay healthy and safe out there! This is going to help out a lot!!!

[@DIYRAY]

Nitro Rich thanks for the feedback and please remember to subscribe to the channel

[@EasyLiving8]

@@DIYRAY Sir, we have subscribed to your channel, once again GREAT JOB, thanks so much for making these GREAT videos!!!

[@brandon3639]

Great video Studio Rays:) It helped me a ton. I was wondering how I was gonna get the mounting block nailed or screwed into the wall. I gotta get that vinyl siding removal tool, that perfect. Thanks so much!

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel

[@DIYRAY]

Also please use the link for the tool above. very click and purchase help the channel.

[@yankeegardener9565]

Looks good but you forgot to culk around your trim box so water and bugs dont get in.

[@DIYRAY]

Thanks for your comments. FYI, I did.

[@chrisk164]

Good job bro..respect..good luck my guy

[@DIYRAY]

Thanks for your support. Please 🙏🏽 remember to like and subscribe.

[@AutOdometer]

Very nice. I was wondering how to get a neat cut. Tin snips were not doing it

[@DIYRAY]

AutOdometer it’s all about the tools. You have the right tool and knowledge, you can get it done right. Thanks for the feedback and please remember to subscribe to the channel

[@weekendhomeprojects]

That looks profession AF. You just increased the value of that home by at least $300 (estimate not adjusted for inflation).

[@DIYRAY]

Thanks 🙏🏽

[@jonsoo1964]

just one observation since the the screws penetrate your vapor barrier it is importan to use silicon caulk ti orevent moisture ffrom entering otherwise good job.

[@DIYRAY]

I used vapor barrier tape, but use can use caulking also. Thanks for the feedback and please subscribe

[@TheMizarc1]

Nice Vid

[@DIYRAY]

Thx, remember to subscribe to the channel. Thx again

[@77hemi]

that electrical outlet looks terrible. not trying to hate, but I came here for that purpose lol

[@DIYRAY]

@@77hemi So don't try to hate., Take the info and apply to your needs. Not all technique will fit in everyone needs. Watch another videos to see final set up. It works for me

[@77hemi]

@@DIYRAY your attitude sucks. I went another route and it looks way better than yours. Lmao

[@DIYRAY]

@@77hemi LOLOL, good for you. Please remember to subscribe

[@marshallnayer]

Thanks for this. This may be a dumb question, but how does this stop water from getting behind the box? I am installing a 16x15 mounting block on top of a 2x12 for an outdoor tv, and what worries me is water getting behind the mounting block. Did you seal it, or am I missing something obvious that doesn’t allow water from getting in behind the block and siding?

[@DIYRAY]

Thanks for the feedback and please remember to subscribe and like the video. To answer the question, check out this video kzbin.info/www/bejne/b52WpIp_gZxjiqc it will help you on your project. Thanks and good luck. This Will show you what I did for protection from water.

[@CharlesLukoba]

The electrical outlet really needs a weather resistant cover!

[@DIYRAY]

It does have weather resistant cover. Thanks for the feedback and please remember to subscribe to the channel and like the video.

[@rict.4938]

Should have continued watching

[@SoupLegion]

looks great, wondering if putting that box under the siding is the only way. thanks for the video

[@SoupLegion]

right on, I just charge my tesla on a single pole 120v now, but I'll likely put in a 240v at some point

[@DIYRAY]

Thanks for the comments. Doing this way just looks better. Good luck and please remember to subscribe and like the video.

[@lovasjj]

Thanks ! Is it accurate to say on most houses on centerblocks the exterior vinyl boxes will be cut in a similar location in the vinyl siding ? Like near the top of the second vinyl strip ? Would that estimate place the wire entry below the first floor ? Thanks..

[@DIYRAY]

Thanks for your comments. Please remember to like and subscribe to the channel.

[@dougrobinson9236]

Did you add caulk for water rain and water leaks? How did you seal this? Thanks for video

[@DIYRAY]

Yes, I added caulking around the corner. And around the pipe. I used color match caulking so it blends with the color of the siding.

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel 😊

[@gullutigga]

Is it possible to do the same for fibre cement hardie boards?

[@DIYRAY]

Thanks for the feedback and please remember to subscribe to the channel and like the video. To answer the question, I have no idea if that will work. Try going to a Siding warehouse that specialize in supplying Building material maybe they can give you a better answer. Good luck

[@mamissah1]

roughly how much does a job like this cost? I just need a hole drilled and an exhaust vent installed i have the hose and everything ready just wondering if its worth me doing or hiring someone

[@DIYRAY]

I can’t answer that question for you. It’s depends on what you’re willing to pay and is it worth your time. Only you can decide.

[@kathicumella6206]

I learned from this but just for myself I wanted to see lifting and insertion of j block and screwing it in place SLOWLY as your hi speed during this step leaves me unsure of exactly how you held siding up at same time that you screwed in place

[@DIYRAY]

Thanks for the feedback. Once you get the block in . It very simple to screw in. Try using speed settings to slow down the video. Good luck 🍀

[@glendavis1266]

So the item not covered is where this line comes into house and hot that is determined so your not placing this in the wrong place by concentrating on the outside only.

[@DIYRAY]

Thanks for the feedback.

[@christophershivery829]

Did not read through comets but should be caulked too

[@DIYRAY]

It was caulk also. Thank for the feedback and please remember to subscribe to the channel and like the video.

[@bally8031]

Kinda close to put a water valve near an electrical outlet.

[@DIYRAY]

Not an issue. The outlet is covered with an outdoor cover and is grounded.

[@aysejoshuaalbut-ortiz9043]

For the love of god how many times are you gonna say ummm lol

[@DIYRAY]

Ummmmmmmmmmmmmmmmmmm! 🤪

[@aysejoshuaalbut-ortiz9043]

@@DIYRAY 😂😂😂😂

[@chrisklingler5254]

The electric box doesn’t even look like a box looks just cut out . From a far looks not very clean

[@DIYRAY]

@@chrisklingler5254 what does that mean? It’s functional and looks good. Haven’t had any issues with it. Over 20 events at my house not one complaint about it. Because everyone cares. Have a great day and a good weekend.