This screw have to tight few days later and later right?
@projectgaadi529320 күн бұрын
No
@sonugetzz6 ай бұрын
Respect 💯
@averagehuman_17 ай бұрын
Diy ka maza aur satisfaction alag hi hta h 👍🏽 Q1. high/low beam projector ka feature h ya bulb H4 jaisa high/low dono h usi me ? Q2. Mai abhi normal fog lamps me osram ka 25W led chala rha hu, kya projector me same led lagane se better focus hga light ka ?
@projectgaadi52936 ай бұрын
Mere bixenon projectors me system alag hai, isme hi/ lo solenoid se operate ho rahe hai, bulb ek hi mode pe output deta hai. If ur going for led then go for biled projectors setup, coz they are sealed units designed for maximum output with those leds. Putting led in halogen projectors won't give satisfactory output.
@peopleslikeshorts9 ай бұрын
High beam ka connection direct headlight se nahi hoga kya jese headlight ki high beam on kare to fog ki bhi ho jaye
@projectgaadi52939 ай бұрын
Possible, but will void warranty.
@assamesemusicculture95568 ай бұрын
@@projectgaadi5293 mera fog light ka connection headlight se kya hein...lekin abhi bhi High beam shirf PASS marnesehi jalte..nahi toh LOW beam shirf jalti hein...High beam ka Connection Headlight ke 3pin ki wire se kaha connect karna padega...pls rply
@jlnarayana4069 ай бұрын
Aes hid projector lence link sir
@projectgaadi52939 ай бұрын
I Got it offline
@jlnarayana4069 ай бұрын
Price sir
@adsaudioenthusiastic8704 Жыл бұрын
Aes q8 pro tri color fog lamp kaise install kar sakte hai iski jaankari dijiye brother 🙏🏻🙏🏻
@projectgaadi5293 Жыл бұрын
U may contact Mr Amit who manufacture wiring harness +919871301846
@sumanmondal445017 күн бұрын
I am also same quire??
@sourabhrathore6421 Жыл бұрын
Parking se agar connection dena hoto kya krna padega Fuse wire ko jo switch ke sath hai usko parking se de skte hai kya?
@projectgaadi5293 Жыл бұрын
In that case u can use 5 pin relay.
@sourabhrathore6421 Жыл бұрын
@@projectgaadi5293 your contact number
@anijgogoi869711 ай бұрын
@@projectgaadi5293sir mera fog light ka cover melt ho raha hai.....sun ki reflection parne se....apka v same problem ho raha hai kya
@RaghunathMallick-fd3qw8 ай бұрын
I installed Gvaa 180W LED H8 with canbus it’s running fine on battery but as soon as am starting the engine it’s turning off within few seconds…previously i was using Zimmer HID 55w with Canbus it was running Smoothly…To solve this problem i installed a relay with fuse of 20A now its working with the engine on but the relay is making a constant buzzing sound…please tell the solution
@projectgaadi52937 ай бұрын
First the relay for projectors should be min 80A or above. Get a higher amperage relay.