How to Install/Setup Inline Fan Kit - Grow Tent Ventilation - Hang or Floor? - Vivosun, AC Infinity

[@johnnyorbital4748]

THANK YOU!! as a future grower, with zero experience, I've been looking for videos like this which explains things in a stripped down to the absolute basics way

[@uriel-heavensguardian8949]

Me too!!! Hope your first grow goes awesomely well!!!!

[@GMT439]

@@uriel-heavensguardian8949 The outside of the tent version you show is not a wise thing to do. You need to dump the extracted air outside of the room or you will be recirculating used air and get less growth in your plants. That said if you had a reliable good CO2 system the outside method would be ok. But it would be OK with the extra CO2.

[@uriel-heavensguardian8949]

@@GMT439 I hear you. I’m not going to set mine up like that anyway. I’m putting everything inside

[@GMT439]

@@uriel-heavensguardian8949 You have seen the logic. You want the fan and filter at the top inside the tent above the light. Hot air rises and that is the used air too.

[@Hi-em8mq]

FINALLY!! I just got the Spider Farmer SF1000 and it says that u should have the fan set up by a qualified professional but it looks so simple to set up. I couldn’t find any videos that actually show you a step by step on how to set it up. All the videos are showing u how to hang them but it’s already set up, so thank you🙏🏻

[@Dino_Hunter_420]

Buy ac infinity with 69pro controller , this is copy of their 67 controller

[@deleqtronica8733]

Spider Farmer must be growing and smoking some fire because getting a "professional" to hang a carbon filter in a grow tent is absolutely nuts lmao

[@ralphmoulph1256]

Qualified professional 😂

[@michaelscott8896]

Perfect. This is how a How To video should be done. Only valid points, the music is not overpowering, there are captions, and the camera angles and clarity are spot on. Thanx bud.

[@Semparo]

These grow tent filter setups givin me ideas for a home air purifier diy, just need to find a hepa filter i can add into the setup!

[@Weare-xl9tv]

Excellent video on how to setup any grow tent fan. Most of them don’t have any instructions! Very helpful. Thank you.

[@420kushmaster]

I have a fan with controller and carbon filter on my air in and another set up taking air out. clean air in clean air out. works Fantastic!! no molds high Temps humidity etc

[@benderas6683]

This is what I was wondering about intake. Could you just use a filter for intake without a fan? 🤔

[@JayDillDrums]

I used to use active. Now I just let it go passive… (meaning no intake fan just exhaust)

[@nickg505]

Wouldn't the smell come out of the intake if the fan turns off due to coolness in the tent? Or do you have it set that it never turns off?

[@ralphmoulph1256]

That's a waste of filter and timesppace.. just use a hepa filter to keep bugs dust etc out

[@Elbean420]

​@nickg505 my fan has a passive mode that runs very very lightly when my temps and humidity are at the right specs, which keeps the smells in still

[@erikgoderstad6708]

There are velcro vents with screens to open on the bottom of the tent, open those instead. This is a great video to show the best set ups!!!

[@NotoriousRideFilms]

Those are great if you want to open and close them every single dark cycle. Cant have them open during the dark. What i do is use the same vent hole he does but hook up like 5ft of ducting and lay it around the border in a U shape so no light gets in through the ducting. So far works great. No light leak and ventilation is keeping it at a steady 75* and 55% humidity.

[@everythinggrows]

For any Questions, message us on discord: discord.com/channels/905550117803810856/905550117803810859

[@sharkny1580]

Thank you!!!! I need this information in a major way.

[@robertfox_420]

Thanks man, really helped me out with this one, I don't have a window & don't mind the smell so this helped me understand more

[@ChadDominick]

fantastic video, really high quality and clearly made

[@NvrGoATM]

Man this is a extremely detailed follow through! Thank you great video

[@dezrtsnek9416]

Thank you!! Trying a new setup today and this helped me A LOT

[@wannendy1587]

0:00 😅

[@robertnoel3158]

Thank you guys very much. Greatly appreciated.

[@MrChayanne93]

best video on this it helped me a lot...btw WHAT SONG IS THIS PLAYING IN THE BACKGROUND LOL

[@donnycox6549]

Enjoyed the video and thank you for the having the answer to my question

[@nypigskin]

If you hang the fan, you should clip the quick clips through the holes in the motor frame, not to each other. Hang the fan from the motor plate. It's more stable this way.

[@GaryInHell]

Thank you! For some reason I could not figure out the straps and I’m not a dumb dumb and it was becoming very frustrating. I have the Spider Farmer kit which is same as this just rebranded

[@anthonydonvito7977]

Thank you bro...this video saved me a serious 2nd headache💯🤞🔥

[@goliath_v3709]

Does this need to ventilated through a window to the outside then? Thank you for the video!

[@jessejz]

No

[@lashun2686]

@@jessejzso when my plants start to smell this set up will still eliminate the smell?

[@Shelton87]

When you say this setup is for temeptures cooler than 78 degrees does that mean with everything off and as is? Or is this the temepture with lights on tent closed. My temperature inside my tent before anything is on is about 72. I also have limited space. I want my filter outside my tent if possible.

[@dekeijzergeorge9974]

With everything operating, after that you check

[@ebonyla3308]

Will me opening a vent make light shine through?

[@TheArpage]

0:29 Have you tried placing the inline duct outside of the tent and leaving the filter inside? The inline duct uses electricity and emits heat as well, adding to the issue you're trying to combat. It may only be a 1 to 2 degree difference. Informative video nonetheless.

[@imbatman7726]

Thats a good point and would work well. Only compromise would be some additional fan noise outside of the tent.

[@TheArpage]

@@imbatman7726 the difference is about 2-5db depending how high the fanspeed is set

[@domderosett6238]

Awesome tutorial thank you so much for posting! I have a question though…Could version B with fan and filter outside the tent have the duct line port at one of the upper side tent vents since hot air rises? Wouldn’t that create less stress for the fan instead sucking hot air from the bottom of the tent?

[@seanrhone5306]

Question on an alternative use. Would this work in a kitchen setting to help clean the air without venting to the outside?

[@uriel-heavensguardian8949]

Awesome!! This is the video I’ve been looking for!!!! Thanks for sharing!!!!!!

[@jfugate82]

Well done my friend!

[@jeffwilson1832]

What size tent is this ? Sorry its my first grow tent setup and grow. Marshydro didn't really show how it should be set up. But its cold where im at so i don't want to let cold air in to heat and blow out?. Whats the best recommended setup 2×4×6 tsl2000

[@kgbigticket]

when you say internal temperature higher then 78 Is that for the room where the tent is located or inside the tent?

[@everythinggrows]

Tent

[@BiodigitalStuff]

I think I did less work framing and building two rooms. I like to hang out with my plants.

[@billanderson3866]

Excellent Video ! New Sub

[@JayDillDrums]

I keep my exhaust fan on the outside of the tent, and I have it on the wall. I have some venting going into the tent going to the fan> then I have venting all the way into the other room blowing out the door. Luckily where I am smell is not an issue so we don’t need a carbon filter.

[@tomlegat-parker5139]

Do you have to vent it to outside? Meaning through a wall?

[@tophjones8110]

Wait.! I put the dust filter on the outside.??! 😲 🤔 I've been trying to put it on the inside, but I couldn't get the carbon filter to turn unsure out. Thank you so much for putting so much emphasis on "the OUTSIDE" so I know... I am so dumb.. 🤦🏼‍♂️

[@oweyougrams]

You can do it both ways

[@uniquemcduffie6171]

Thank you for this video so informational

[@johnnyorbital4748]

do you mind if I ask.. if I'm gonna be growing in a 3x3, in a 10ft x 10ft room, opposite the window wall.. do I need to run the duct to the window? if so, does it need to be actually OUT of the window? or can it just be near the window?

[@HowWeedGrow]

doesnt need to be out of the window, but it is better if it is.

[@michellesutcliffe8446]

Were does the old air go and were is the Fresh air coming from? It's not recirculating in the room the tent is in is it,I mean if it is what's the point, expensive air mixer??

[@everythinggrows]

Picture yourself sleeping with a blanket on top of your face vs with it off, that’s how the plants feel

[@dagodigs]

What do you do with the bag of carbon pellets i found inside my filter??

[@mamamia6513]

Does carbon filter can deal with the smell %100 or a little bit of smell left over ?

[@Userx4566]

100% zéro odeurs avec ça tu peux y allez même en ouvrant la box c'est hyper efficace

[@a.j.infowars7582]

What is the best for my citrus tree? How long to leave them on? On when light are on?

[@LeoMajor1]

Why do you put the cloth filter on the carbon filter on the inside if you have it outside of the grow tent?

[@thenotoriousfig]

Think of direction of airflow. Pull vs push. If inside the tent you pull thru the sock first to catch big bugs/etc, then to the carbon, then outside. If everything is outside, the air hits the the sock then the carbon then is pushed out to the outside.

[@aaronwoodley9624]

I'm concerned about this to, I'm going to do it but it seems like it is making air flow worse. Or making the motor work to hard idk I'm new just sacred.

[@LemonTekkin]

@@aaronwoodley9624no your not getting it it’s better for me as keeps it Quiet since it’s 1 outside the Tent & 2 I have no carpets yet as in a new flat, but u need to understand Push vs Pull listen very closely in the video and then think again I have mine outside the Tent since I’m only running a 60x60x120 with 4 plants it’s too much for a small tent even the smallest which I have 4inch so just put it outside the Tent or if u have a bigger tent inside is the best way, if I had more room ect I’d buy an extra top pole or make my own & put it inside but since it’s the smallest tent Mars Hydro do I’d always Suggest putting your Fan on the outside regardless of temp forger that u just want Fresh, Constant air plus the benefits of no smell if smell wasn’t a issue dam u could just run the fan in & direct out.

[@sc4rez]

what do i do if i cannot directly fit my fan onto the filter because the holes arent the same diameter?

[@alanjackson2540]

Hi are those tents big enough to grow 4 plants? And can anyone advise how much electricity they use per day in watt hours? Thank you.

[@Religous_1]

Yeah my 720w led cost about 30$ a month running 18/6 hrs

[@kosycat1]

I have two 3x3 tents with 6 inch carbon filters on the outside of the tent sucking in cleanair,and ac infinity 6 inch inline fans on top of each tent on the ouside each with its own backdraft dampener,then Y split into a single 6 inch duct then one more backdraft dampener right before going to the utside window soffet a made for my basement window I made by taking the screen out for the hopper window and got polycarbonate cut to the same size with the soffet mounted in it,and sealed off with silicon and clay weatherstripping around the screen frame in the window

[@Tdo99ABB]

Is it anyway I could get a picture of your set up I have a 3x3 as well but my temps are too high.

[@Tdo99ABB]

I have mine set up in the tent with the air flow thing coming from the incline fan sitting on the top of the tent if that makes sense

[@420Dreamz36]

I just got an AC Infinity 4-in cloudline pro and I don't know how to work the 69 controller too technical for me so I'm just using it on 1080p for the level of speed just for the exhaust because I'm in flower I would love to try to get my 10 at 66 and 60 any tricks or fan speeds or numbers that you know of 3

[@brettpayton6286]

Awsome video. I'm curious of your opinion. I want to set mine up in my insulated small shed. If this space is let's say 85-100. How would you control that access heat when your bringing in fresh air? I appreciate it. Thanks

[@dartmaster5877]

An AC unit unfortunately, moving air is not enough to cool 100 degrees to lets say 70 degrees. Also the shed would need to be insulated or it will cost you a fortune, the AC unit would run 24/7. There are cheap ways to insulate it and a window unit is around 150$. If your in the south and not out west, you may also need a dehumidifier at those temps.

[@frostytreats6680]

Gonna need ac for that. Do 2 or 3, 3x3 living soil beds, in a 10x10 or 12x12 shed, insulated and sealed. Microbial activities in the soil w 2 or more beds will hold your co2 over 1000ppm so won't even need a tank.

[@twell_gvuge_the_realest_1394]

Bro thank you for clearing this up for me I'm having to use a closet so very limited on space but can't find anything relating blowing air into the filter

[@roberttaggart5757]

What size is the filter 100mm ?

[@timsmyth7942]

what if your tent only has one hanging support and needs to be in the middle for the light

[@johnnyorbital4748]

I'm pretty sure you'll be able to buy extra supports?

[@timsmyth7942]

@@johnnyorbital4748 i did it without but wasnt ideal, carbon filter was touching the tent, i found a extra support that fit it worked better

[@joeneguss3883]

Might be able to use a small rope and attach to that

[@c0pyimitati0n]

So what if I don't care about the smell? Should i just vent to outside my tent/another room to help control heat? Also i wonder if i can get a dust filter for my inline fan?

[@everythinggrows]

then as long as you have clean air in your house, you dont even need a carbon filter

[@Melonlordshorts]

Can I put the vent on my window so it can get fresh air

[@joebanks9529]

Could you not just run the 1st setup but run the outlet duct somewhere near the intake. With a bit of experimenting with distance from the intake, you could hit the temp sweetspot.

[@skyfiresandovalrealtor]

great video

[@Mrralphfolorain]

How do you keep light leaks out drone the vents??

[@everythinggrows]

They sell vent caps or old carbon filters Honestly though, I have intentional light leaks in all my grows to eliminate simple stressing herms

[@Levonsiio]

Hey, I need help, please. I got the duct fan and the circulating fan, and for some reason, they both turn on when I only turn the circulating fan on. I don't understand how these two are connected when the Ehub module I got has a light, duct fan, and circulating fan in it. Does anyone have any advice on how to make them operate separately?

[@sharkny1580]

Thanks for the tips on setting up a grow tent because Vivosun instruction videos and manuals are not that informative.

[@jmack4275]

What are those straps called? To hold the inline fan?

[@nypigskin]

The inline fan straps. Doh! You should clip the quick clips through the holes in the motor frame, not to each other. Hang the fan from the motor plate.

[@jameswilliford5478]

If the manufacturers had their crap together they would provide a simple mounting plate that you could attach to a top cross pole with u-bolts or pins and use the mount that's on the fan. I can probably fabricate something that will work, but I shouldn't have to.

[@trga2568]

You could patent a bracket and license to the manufacturer

[@tar3002]

But won’t the air hole open it up to light and if you’re doing certain times where the light is off, wouldn’t that be a problem?

[@tar3002]

@@BiodigitalStuff females also, I mean that sounds crazy. You’re telling me that a tank cant hold a female have you ever tried?

[@BiodigitalStuff]

@@tar3002 I think you missed the point. You couldn't pay me to tent grow. I couldn't fit one of my plants in that tent.

[@trga2568]

@@BiodigitalStuffdamn what do you grow? One plant can’t fit in a ten by ten tent, it must be real big. Sounds like a lot of chance for mold and mildew. Longer veg times aren’t a brag though, so not sure why you act like some type of super grower

[@chrisg9840]

Who’d you beat up?

[@Jemstk]

My tent has no bottom vent bottom just has screen on bottom

[@BKgamer718]

clip the clip to the clip.... got it lol

[@nypigskin]

Yeah, no. You should clip the quick clips through the holes in the motor frame.

[@rayrivera2541]

where does it all exhaust to?? is there a smell coming out off this?

[@Just_A_Name14]

The carbon filter is for containing the smell lol

[@rayrivera2541]

yes I know that, but was just wondering if it does the job, how good of job does it do....@@Just_A_Name14

[@errodll]

Hi how are y? Do you have any problem with vivosun zipper? Thanks

[@jeremylang129]

My zipper has the same problem it gets caught three quarters up by hanging up on inner sleeve it sucks

[@errodll]

@@jeremylang129 ty

[@IntelligentThugs]

Why cant i get my humidity down. Ac infinity 3x3 .

[@laithharrington4461]

You probably don't have a large enough dehumidifier its better to get one with more square foot then your tent is makes it easier on it plants put off alot of humidity

[@anthonylira6674]

How long can you use a air filter in your grow tent,But it's been in the storage unit for about 3 years could I still use it? Thanks Bro

[@brad4theanimals]

I don't want to create confusion but the manufacturer of the fans I use (not the same ones used in this video) suggest never direct connection filters to fans and instead to use ducting between. I'm just curious to know if you've ever heard this suggested or if you reached out to the manufacturer directly?

[@trga2568]

Typically it’s for noise control. Separating the filter from the fan quiets it down.

[@LemonTekkin]

@@trga2568how is that achieved then? Elaborate please

[@trga2568]

@@LemonTekkin you simply use ducting between the inline fan and the filter itself. If you have a silencer, it should also have ducting between it and the fan

[@petergill4744]

But the outside of the tent will smell because it's a larger space. Not all filters can accept reverse flow through filter

[@everythinggrows]

its setup like a still air box. All the air must go through the carbon filter so you should not smell anything outside the tnet.

[@weeedlovver7619]

hey im using active inline system with t6 for exhaust and s6 for inline my settings atthe moment are on auto mode with min 0 max 4 for t6 with temp transition 1% and 0 to 2 for the s6 with 1% transition aswell i got a problem with the VPD is over 2.5 im using 60x60x160 tent the inline fan takes air directly from outside the house and exhaust go outside aswell temperature is around 20-28C the place i live and humidity is like 30-40% at this moment is 27c and humidity 34% and my VPD is 2.53 im only testing without plants only tent setup with lamp and everything on without circulation atm is humidifier inside gonna help me make this VPD to atleast 1.2-1.5 ?

[@slipperypete1608]

Yes. VPD is all about temp and humidity balancing. More humidity in the tent would bring the VPD down with a temp of 28C

[@TipsyCHUBBZ]

dust filter inside? does literally nothing

[@karenlock100]

My duct doesn't fit my fan, why? What am I doing wrong?

[@slickmick1902]

Keep pulling it out untill u can’t pull anymore

[@carlosbaker7825]

great video but with my luck i have to hang inside since my tent gets up to 85 degree

[@wizimann]

Thanks Bro

[@densko9]

Anybody have any tipa for me regarding high RH in tent? I use irrigation drippers and notice end of flower only above 90%. The room the tent is in is also really small and only one small window to vent all air out of the window. Going to run a stronger exhaust fan now to hopefully blow more humid air outside. Especially using drippers and lots of stagnant water on floor doesnt help but it saves so much labour. Anybody same experience? Any tips?

[@everythinggrows]

Defoliate, less leaves is less perspiration. only feed right after lights turn on, get the humidity outside the tent (lung room lower)

[@IntelligentThugs]

My hum i cant get below 68 65

[@fflegends8333]

I'm wondering if there are any mushroom growers out there that watched this video. What I aim to do is have the carbon filter and fan outside, stacked on the ground and the duct going up then into the high port on the side, with the airflow flowing into the tent. I believe filtering the air before it goes into the tent is better for mushroom growers to reduce contamination. This puts the tent in a positive pressure (I believe this also is better to reduce contamination). The air will flow out of a vent i will place in one of the bottom tent ports which is a louvered vent that opens only when air is forced through it. I want the air flowing out the bottom to get rid of CO2 (created by the mushrooms) for a good FAE (CO2 sinks in air). Inside the tent will be very high humidity at times, and i know this fan is supposed to be ok with that, but everything breaks down in time and keeping the fan outside could extend its life, and one less thing to clean inside the tent. Is anyone else doing it like I described?

[@bobthorn7879]

I'm trying to figure out my setup (for mushrooms) at the moment. I bought the inline fan kit, but I keep hearing a centrifugal exhaust is the best for "our health"/maintanence in case of spores. Apparently spores fill the room with a positive pressure setup and inlines are bad for exhaust seeing how they clog easily. So I'm thinking of swapping and having an inline duct fan for fresh air as well? Need more information!

[@purplesmoke4612]

To be honest, I think that's a perfect idea because you are definitely reducing the risk of contamination if you're doing this method. When I grew mine, I didn't have any ventilation in my setup. What I did to reduce the risk of contamination is just leave the mycelium alone. Whenever I had to mist the mushrooms, I would fan it out to circulate some air using the lid of the tote I was fruiting these in. All you really have to worry about is the lighting and temperature when it comes to cultivating mushrooms. You don't have to worry about spending hundreds on a ventilation system or even in a tent, it's nice to but remember, the mycelium becomes pretty resistant to contamination once it covers the substrate you're using. They can be found growing on poo and poo is poo

[@brianreba6591]

It doesn’t matter tbh fae is fae I’ve dropped my cakes on the ground and they been fine I never wash my hands when dealing with them. Never get contam if I do it’s the grains fault

[@RigFit]

Got mine ordered yesterday lol new shroom grower here

[@grow4profit]

My grow room is at 84 with the in-line fan I'm trying to get down to 80.. I have 3 small fans+ humidifier. Do I need bigger fans ? The light I got is a huge one holds 6 T5 54k watt lights no LED so I'm guessing it's really hot bulbs . What do you reccomend? To get my room cooler

[@everythinggrows]

Have lights on at nighttime. Duct the inline fan outside

[@grow4profit]

@@everythinggrows I have it strapped to the top blowing hot air out the top but my room still hot. So put it outside the grow room an have it blowing cold air in? I literally jus started 3 weeks ago idk anything bout this

[@everythinggrows]

@@grow4profit no get a duct long enough to vent out to a window, the fan would still be blowing air out from the top inside of your tent

[@MartydaGrowa]

Why would you draw hot air over the plants ?!

[@wefree201]

I would guess because the grow room is too cool, maybe in a basement circumstance.

[@bradywitt8206]

so how do you place it on the floor if your rooms to hot for the life of me I can’t hang it up top because it keeps falling down

[@everythinggrows]

Check the descirption

[@Stabzcell97812]

Does this lower the life of your carbon filter?

[@dmo848]

Humidity is what kills the filter. Anything over 70 kills it. Lower is better obviously

[@davidlima1362]

Para uma barraca de 40x40x160 qual seria a melhor opção?

[@LemonTekkin]

Outside but I guess u guessed this already lol

[@JayDillDrums]

Man the easiest way to do it is to keep it outside and just put venting on both sides of the exhaust fan, we the vent that sucks out into the top hole, you can either keep the fan on the floor outside , or you can mount it to a wooden wall like I do it does work on the outside of the tent and simply pulls out from a vent.

[@blacknass1943]

👍👍

[@surronzak8154]

7:33 never push into the filter, always pull, if you need to place it outside, what you always want for more room in the tent, just put it in a cardboard box, pull from the filter with the fan, this will pull pull from the box into the cardboard box et voilà as simple as that.

[@thenotoriousfig]

why always pull? and pls explain the box more. thanks

[@harrybabcock8982]

The price is what I want to know I want to know what it cost to buy one a complete kit like you're showing a gorilla shorty 4 by 4

[@harrybabcock8982]

Well what's One cost if I bought one today how much would I spend to the penny

[@krystofelyournet4303]

And even u can't clean the fan to keep u busy buy everything time

[@chrisb222]

@@harrybabcock8982 62 bucks a kit - bucket, lid pot - i bought 3 and shipping was 45 went back to buy one more shipping is still 45

[@minnesnowda2510]

I bought 5x5 infinity tent, the 6” pro fan, and bought the aglex 800 watt , 10 5gal grow bags, all nutes as shown on coco for cannabis plus irrigation setup and the pump, and bought the drain away 15” saucers and plumbing and condensate shallow pump complete setup was about $1700 seeds, coco, everything.. I used Amazon almost for everything and bought the perlite and coco bricks

[@TravelingStacker]

If only there was a place to look that up...

[@deleqtronica8733]

The fan + carbon filter outside should be a last resort, best is to hang the carbon filter inside, run a duct outside and connect it to a fan thats mounted outside. You have plenty of room left in the left, your carbon filter is being used in the most efficient manner, your fan isnt getting dirty sucking in air that isnt filtered and your tent keeps the heat down. Its all benefits and no drawbacks.

[@terryharris3393]

HVAC rule: any exit flow from a fan must have at least 3 or 4 flow diameters before a change in flow direction and that change needs to occur gradually and not in a single 90deg turn least you cut your flow rate by half. A radius of 10 diameters is not too much. For a 4” diameter exhaust this would be 4-16” exit distance before a 40” diameter turn radius. These facts can be seen in every manufacturers ads showing a fan with a straight intake to exhaust ducting setup. When will the uninitiated stop trying to lead the uninformed?? If you understand this, please explain why some you would choose to decrease the CFM of the setup by half for each violation?

[@victorgr54]

In layman's terms, please. I don't understand most of these facts. What is your solution? Is this setup practical or is there an obvious flaw that you note?

[@FatswellSmart]

@@victorgr54 so for the layman, if your using a 6 inch fan, you would need a straight section of ducting 3 to 4 times the diameter of the fan before a change in flow direction. if you need to change direction of the airfow with the ducting you need to avoid sharp 90deg turns. instead use gradual changes which will help in reducing turbulence and pressure drop. Sharp turns lead to increased resistance. ideally the filter connected to the fan connected to a straight section out of the tent in a straight line is the ideal setup.

[@o6se7en6o]

... Is this not HowWeedGrows? They talk the same.

[@everythinggrows]

Both channels are me

[@RedPillGrower]

😂✌️😎🔥🔥🔥

[@imfinicky7134]

this video stoner verified !!

[@akallius5427]

DO NOT STICK THAT DUST FILTER INSIDE ITS NOT SUPPOSE TO GO INSIDE IT ALMOST WRECKED MY FAN EVEN TALKED TO ACINFINITY AND THEY ALL SAY ITS NOT SUPPOSE TO GO INSIDE. WATCHED MANY VIDEOS AND READ MANY GUIDES NOT ONE SAYS TO GO INSIDE. BAD VIDEO!

[@brookebiddle6199]

Don’t stick the dust filter where exactly? I don’t want mine to mess up either? Could you elaborate a little bit?

[@brookebiddle6199]

I see now nm just had to watch the whole video I see exactly what ur saying

[@brookebiddle6199]

So it’s only suppose to be hung like he did in the first illustration right?

[@stuppittyhed]

Lol what

[@isorides]

The manual says you can put it inside tho

[@tylerdurden6460]

there are literal mounting holes, this is a hack job

[@sideaccount6198]

maybe you were expecting him to drill into the roof of the fabric grow tent?

[@lootznbootz4588]

@@sideaccount6198 😂😂😂

[@Haywoodjablomie100]

The AC Infinity fan mount is garbage, probably 90% of people use it in a tent and all they have is a plate to mount it to a wall and no pole mount.

[@minnesnowda2510]

I used zip ties and the straps it came with , works great

[@robmen1402]

​@@minnesnowda2510such a simple thing to fix or figure out and he calks it garbage lmao.

[@TestNuggzz]

Guys an idiot

[@oliverschulz874]

​@@minnesnowda2510 same

[@Scruff404]

Even easier!! You just have to clip the slings in those 4 holes !! It's even demonstrated on ever AC photo of their installation (the one that comes with the fan for example 😜)

[@DUTCHSCROGGER]

That shouldn't be in the tent at all should be closed system

[@seanstewart8942]

Do the opposite of what this guy says 😂

[@bensullivan9478]

not sure if ur trolling, but this is a horrible way to set up your setup. 😅

[@LeeroiJenkin]

What’s the right way to?

[@Userx4566]

And put the intractror inside the tent and the carbon filter outside it's possible

[@peckerwood780]

The methods you're showing drastically decrease air flow. Putting a 90° turn in the airline cuts about 40% of the airflow. They need to be as straight as possible.

[@everythinggrows]

These units can handle the pressure required to flow through turns. Besides, enlighten me on a way that doesn’t have any turns. Am I supposed to have it stacked like a totem pole and still somehow have the vent and filter elevated in the air?

[@tonygibson6572]

Awesome brother 👏 Thanks for showing the different setups and great explaining as well, absolutely appreciated content I've like 👍 & Smashed the SUB button look forward to checking out the rest of your freely shared journey brother ✌🌱🪴💣💥 have a Lifted day