How to Install Step Flashing | Shingle Roof Install Guide

[@RoofRepairSpecialist]

Thanks for watching! Hit the Like button if this tutorial was helpful!

[@stevethecat9194]

Excellent video. I am a non professional. This is exactly what i needed.

[@RoofRepairSpecialist]

Glad it was helpful. Good luck on your project, let me know if any questions come up

[@rerite2]

Same here.

[@PeteLeuenberger]

Thanks for your great videos, the best I've found. Why not install a long flashing piece that covers the entire length, under all shingles ? Vs this layered, cascade like approach ?

[@RoofRepairSpecialist]

Definitely don’t do that. Step flashing kicks the water out and doesn’t allow water to travel under the shingle.

[@PeteLeuenberger]

@@RoofRepairSpecialist Ok, I get it now. Thanks !

[@donforman4326]

what about the counter flashing install?

[@timlarge8927]

Only 3 nails per shingle? How many nails are required by the product approval for the shingles?

[@nathanielvelazquez1147]

These are OC duration shingles. 4 or 6 nail pattern is acceptable per manufacturer installation instructions

[@MrVincentj46]

Great video, thanks

[@RoofRepairSpecialist]

Very welcome

[@saintmichael1874]

THX sooo much !!!

[@RoofRepairSpecialist]

Thanks for watching.

[@stumpynubs5387]

How do you flash the top part of the skylight?

[@RoofRepairSpecialist]

I have a video on that.

[@nathanielvelazquez1147]

With regular shingle flashing, which you can honestly run shingle flashing aground the perimeter of curb and seal with a 3 course of bull membrane bull

[@mmichaud08]

everywhere else you use an entire piece of metal, but for some reason in the corner you just need a little goop?

[@RoofRepairSpecialist]

?

[@ilovethisroofingjob]

Good

[@RoofRepairSpecialist]

Thanks

[@toddavis8603]

Not too shabby!"

[@highnoter1]

Don't nail the flashing into the shingle. You are introducing an extra hole into the flashing. Why would you do that?

[@RoofRepairSpecialist]

We generally dont nail it to the curb, especially if it is a brick fire place you are not able to do so. The nail we put in will be covered by the next row of shingles and flashings.

[@tyfreedom5793]

2:08 wrong, wrong wrong.. like very very wrong….🤦🏼‍♂️

[@RoofRepairSpecialist]

Your wrong

[@tyfreedom5793]

Actually no I’m not… that’s so incorrect it’s not funny

[@tyfreedom5793]

And it’s “you’re” lol 😉

[@JonathanSHoover]

Yea I agree, I'd wrap the outside corner on the first piece of step, also you're guy is nailing very close to the skylight

[@dynastyroofingcny]

Just because it’s not wrapped doesn’t mean it’s wrong. I’ve seen hundreds of roofers install this exact way and I’ve never seen anyone have an issue. Have an open mind, their are plenty of ways to do things on a roof

[@olcotttheosophy]

☑️👍

[@RoofRepairSpecialist]

Thanks for the thumbs up!

[@whommee]

putting that nail in the end of the shingle close to that curb, through the step flashing is a terrible thing to do

[@RoofRepairSpecialist]

The next row of step flashing covers said nail. If your not dealing with Ice and snow its not a problem.

[@nathanielvelazquez1147]

Why not have some peel n stick running up the curb along side and head wall of that curb? Your video shows no water penetration but it’s not sealed properly and any wind driven rain will leak.

[@RoofRepairSpecialist]

I’ve never had a leak because of that, peel and stick is called ice and water shield and when used in similar situations is for ice

[@audielgomez2551]

Tk

[@patryksawicki3078]

Wrong 😂😢

[@RoofRepairSpecialist]

lol, really sounds like you know best

[@stephanietrapasso1447]

You have no idea what you're doing.

[@RoofRepairSpecialist]

Why is that?

[@AD-hs4cw]

dont put the step flashing down over the glue stick of the previous shingle for obvious reasons...come on man

[@RoofRepairSpecialist]

??

[@AD-hs4cw]

@@RoofRepairSpecialist the glue strip on the shingle...when you put the next shingle down you want that glue from the previous single to connect and form a nice melted glue seam...but when you put the step flashing down to far on the shingle you stop that from happening. this is common sense