Рет қаралды 49,953
►►► SUBSCRIBE TO THE CHANNEL TO FOLLOW OUR VIDEOS!
www.youtube.co...
►►► DO YOURSELF channel projects:
• DIY: Churrasqueira do ...
So what about beauty callers? After the ReZenhando family moved, it was necessary to optimize the sun filtering process for my plants, since the space is now larger and the area to be covered consequently also. This time I wanted to come up with a way to keep the sombrites well stretched and fixed. In this endeavor there were mistakes, successes and a lot of learning, for example, I learned to keep the wire very straight (stretched) before using it for anything, what percentage of sombrite to use and how to make an indestructible installation.
The amount of material becomes indifferent, everything will depend on the size of the area where you will cover, I will leave here what I used and what worked on the project, based on that, you will use a measuring tape to buy the amount of footage correct for each material. You will need:
Essential tools: Drill, Pliers, Measuring Tape, Hammer and Philips Wrench;
Shade at least 70% (less than that is not effective to protect plants, in times of extreme drought and scorching sun, they can break out). Buy the sombrite with a few centimeters more than the measure that you will cover, as it will be necessary to attach stretched with the "hangs cats";
10 mm screws, bushings and hooks. In my project I did it with 8 millimeters, but don't do that !!! In times of intense rain with gusts, the bushings cannot withstand the tension and come off the wall;
Clamps "hangs cat" to give the finish when attaching them to the shade, wire and hooks.
First cut with pliers in the measurements of the area to be covered the wires. Attach one end of the wire to the drill chuck and the other end to tie something stout, which will not come off easily. Give the drill a light pulse until the wire is taut.
Drill the wall or wall with a 10 mm drill in the places where you will fix the hooks that will support the wires.
Fit the bushings and then thread the hooks.
With pliers, secure the wires to the hooks. Make sure that one side you use as a reference to keep the wire taut.
From one side to which the hooks are attached, spread the umbrella over it and attach it to the end of the hooks, alternating with the clamps. Do the same thing on the other side.
With both sides of the sombrite properly attached, now just adjust the clamps with the wire, in which with each clamp that is installed, keep the sombrite well stretched. The leftovers of the sides and sides attached to hooks, wrap them inside as if it were the shaft of an awning and secure with more clamps.
READY, you will have a PIKA sombrite cover! It can even be used as a garage if its shade is 90%.
And then liked the tip? Comment, your comment is the soul of the blog and channel!
See you and thanks for the fish!
-------------------------------------------------- -------------
Access the Blog Rezenhando, the Pop Culture from A to Z! - rezenhando.wor...
Access this post directly on the blog - rezenhando.wor...
Like our page on facebook and get access to free quality content: / rezenhandoaculturapopaz
Follow on Twitter: / birovisky
Follow on Instagram: / birovisky
-------------------------------------------------- -------------
#Garden #Garden #Diy
-------------------------------------------------- -------------
TAGS: how to make wire straight, how to stretch wire, how to make sombrite for plants, how to install sombrite, how to assemble sombrite, stretching wire, installing sombrite, which% sombrite to use, sombrite 100, sombrite 50, sombrite 80 decreases the temperature, shade for succulents, shade price m2, shade protect from rain, retractable shade, shade screen 90, shade screen for garage, shade screen price meter