How to Install Surge Protector EMS Hardwired 2021 Keystone Cougar RV Electrical Management System

This video will show you step by step how to install Progressive Industries Surge Protector on a 2021 Keystone Cougar RV. This video will show you how to install an Electric Management System ( aka EMS )Surge Protector on a 2021 Keystone Cougar RV. How to install EMS-LCHW50 Progressive Industries.
Progressive Industries Hardwired Electrical Management Systems aka EMS provide full RV protection against all adverse power conditions. You will feel secure with multi-mode surge, voltage, polarity, and lost/open neutral protection. Each unit includes a digital display, scrolling continuously through the power source information: Voltage(s), current, frequency, error code, and previous error code (if applicable). Replacement parts are simply plug-and-play, making repairs quick and easy. The EMS is driven by state-of-the-art microprocessors.
This is my Amazon Associate link for the EMS, tools, and parts used in this video:
EMS Surge Protector amzn.to/2YMbnE8
Cable - Wire Cutter amzn.to/3cbQ5Dd
Wire Stripper amzn.to/3CcRUdD
6 AWG with Ground wire 10ft amzn.to/3FcrCtI
You can also pick up most of the above tools / parts from your big box stores!
I placed the link above for your convenience and if you prefer items to be shipped to you.
All products featured in this video were purchased with my own money.
This is NOT a sponsored video. All products featured in this video were purchased with my own money. Help us fund our channel’s next video by using the AMZN links above. Price is the same whether you use the link or not. As an Amazon Affiliate, we earn a few cents here and there to help fund our next video project. I am an Amazon Affiliate.

[@alanb.4660]

I have the one with the remote display mounted above the converter...great to check the loads etc.

[@theboondockbungalow1816]

My wiring label also says the "arrows side of sensor "goes toward the terminal lug, but I could not find any "arrow" on my sensor

[@cbatilo]

Yup. Caught it. Here is the Correction vid kzbin.info/www/bejne/qqDWn3efm9N3pMU

[@theboondockbungalow1816]

On my Progressive industries 50A the wiring label inside the box says the sensor with the "green tape" goes to the black wire T1, there was no green tape just a green marking.

[@cbatilo]

Yup. Caught it .Here is the correction vid

[@robertbrown9147]

I can’t believe it took you two days to hook that up

[@jesseswilson]

Great video, thanks. Wanted to mention, my directions say the opposite of your sensors? they say black wire withe green marked sensor...

[@KaraGermanShepherdAdventure]

Follow the manual… Cbatilo made Another video to correct that… kzbin.info/www/bejne/qqDWn3efm9N3pMU

[@fixtradingconsulting2935]

Great video curious if u did this step per instx pdf "Remove the two screws on contactor where marked L1, L2, etc. Next remove the top plastic plate with markings. Examine inside ensuring there are no loose plastic pieces inside the contactor. If so, remove and re-install cover with two screws. See visual references on page 9. ! CAUTION If you break off a tab and do not remove it, thi

[@dawnr6577]

Did you set the time delay to 15 or 136?

[@alanbrown1358]

I'm in the middle of my second install. I contacted them a year ago during my first one about the missing 'direction' arrow on the sensors (yes, I see you caught your mistake on where the green marked sensor goes). They told me last year the new sensors are not direction oriented and need not worry. Said they had not updated the manual yet. A year later, still haven't. Hardest part is STILL getting these fat stiff cables to bend and get in there neatly. UGH!! (BTW, I'm not the same person as Alan B. who commented a year ago)

[@patricksquires77]

I was like what arrow? Mine was warranted and arrived yesterday and still not updates instructions.