How to install the Aquor water system on your mobile detailing setup?

[@alaury13]

It’s crazy how fast He has grown. The GOAT of mobile detailing setups. 💪🏽👊🏾

[@RaldasDetails]

Thanks brother! The detailing business is very good but I’m just investing in my business.

[@alaury13]

@@RaldasDetails I’m workingf hard out here so I can get a chance to come and meet with you. Hopefully I can get one of those legendary setups in my Van that I just purchased. I’m going to do the set up first and send you a vid when I can to see what you think. Keep up the amazing work brother. You’re killing it. Tell the family hello and y’all be safe out there 🙏🏾 Laury’sMobileDetailing- Dallas, Tx.

[@frankenstanggarage7911]

I installed 3 of these same Aquor Water Systems on my detail trailer and i love them!!! Super convenient!

[@RaldasDetails]

Yes I think I saw 👀 your trailer some were!! Yes the area nice!!

[@KentFleshman]

If you do this again, make sure you paint the exposed metal edge of your cutout with rustoleum or something similar to avoid rust. Super clean setup. 👏👏

[@RaldasDetails]

Thanks sir!

[@prennrecaj2957]

Wow Tony what a great build you earned the #1 spot for auto detailing builds continuous success on your business and endeavors

[@RaldasDetails]

Thanks brother!!

[@cesarmecinas2600]

I always ask my self that 🤣Do you need it? No But I want it lol love that 👍🏽

[@RaldasDetails]

Lol me to!! 😂😂

[@cebasmb8250]

So tru lol.....I bought a van just to do a setup do I need it? No but I just wanted one and love what I did to it

[@theslavingroup58]

Thanx Tony. Love that product. I will be purchasing one of those for sure. Great find and letting us know the drill size and screw size is awesome. Keep going my friend! Jerry in Tucson

[@RaldasDetails]

Thanks brother!!🙏🙏

[@jimreed3712]

I freaking love it! Awesome idea and job, Tony.

[@mendezmobiledetailing]

Super easy to follow, great content!

[@garciasautomotivedetail5196]

Awesome set up Tony

[@AquorWaterSystems]

Awesome install and walkthrough! Great idea to have the 90° downturn behind the Aquor inlet -- for any colder zones, this will give a bit of extra freeze protection. Nice work.

[@RaldasDetails]

Thanks 🙏

[@deezomac4279]

Love you our vibes Fam continued success THE MAD SCIENTIST OF DETAIL💪🏽💪🏽

[@RaldasDetails]

Thanks brother!! 🙏🙏

[@CaliforniaCasey]

Looks great and thank you for sharing your work!

[@dreamworksdetailing6954]

Another great video, very informative and goes step by step. Thanks Tony!

[@RaldasDetails]

Thanks brother!

[@ddautodetailing]

Looking good! I was thinking a nice flexible hose would do the trick, and wouldn't you know there it is. Great job as always 👏.

[@TheUltimateTouchDetailing]

Great work Tony !

[@magiktouchdetailing]

Dude that's tight bro I love your build keep the great work

[@ProGleamAutoCare]

Muchas gracias por compartir esta clase videos han sido de mucha utilidad, tus setups son increíbles

[@SpotlessWaterGuy]

That looks clean 👌

[@RaldasDetails]

Thanks brother! 🙏

[@waltergray9182]

Great job

[@RaldasDetails]

Thanks brother

[@bladimirguante8466]

Tony is the best !

[@RaldasDetails]

Thanks brother!

[@jonnyshielldetailing]

Great video Tony 🫡

[@PLLuxuryReviews]

Awesome video

[@RaldasDetails]

Thanks brother!

[@cebasmb8250]

Great idea Tony 💯.....just saying I would of put some Clear silicone behind that just so no water seeps in anywhere and cause rust on where you cut out my suggestion....just saying but fantastic job as always 👌🏽 keep it up brother van is sweeeeeet

[@RaldasDetails]

Thanks brother I appreciate you!

[@soniahernandez4168]

Nice work Tony Do you have a video on how to do the electric connection next to the tool box by any chance ??

[@RaldasDetails]

Yes the video is one of the first ones I made is on the list of videos in my channel 👍🏻

[@Brandinwagstaff]

Hey Tony Thanks for Sharing all these tips and ideas. I had a question, how do you fit the head of the extension cord reel through the blue 4 way roller to make it look like a coxreels? Thanks so much!

[@RaldasDetails]

Thanks brother! We cut the end of the extension cord then install a new one!

[@Brandinwagstaff]

@@RaldasDetails wow I didn’t expect you to say that option. I took my reel apart to see if it could be pushed in from the other end but at first glance looks a little too difficult. And I noticed once I started disassembling this plastic reel was not a good idea since the screws go into the plastic threading and strip and compromise the secureness. It it would be awesome if you could possibly do a video on this sometime. Too bad I am in California and so far. I would love to hire you for your expertise on my build. Anyway I can check out your prices for generator slide out and quick release bottle holders?

[@florinvoicufv]

Love your videos and your work by far the best at what you do I’m in Australia how can I get a good setup on Mercedes Vito van I’m at the beginning

[@RaldasDetails]

Send me and email address thanks!

[@T-WashMD2019]

Alright T! You have taking me over the top with this one. Can I have one😃

[@RaldasDetails]

Yes sir we can do that just call me to plan it! 👍🏼

[@T-WashMD2019]

@@RaldasDetails Yes sir! Will do

[@3mautospallc]

Pura calidad 👌🏽 💯

[@erhelitruck]

Hermano saludos y bendiciones. Por Favor me puedes instruir que Bomba de presión puedo comprar que me sirva para lavar vehículos, pisos, casas etc.

[@RaldasDetails]

Para ese propósito te recomiendo una de gas de por lo menos unos 4,000 psi y 4 gpm puede ser una Honda gsx 90 con una A/R blue pump está puede seramzn.to/3E4JcST

[@elyeye81]

exelente videos grasias tony puede aser un video como aser el slave para el generador electrico sacar y meter con slave porfavor grasias

[@RaldasDetails]

Gracias ese vide ya está hecho hermano solo ve unos 2 años atrás en mis videos!!

[@vcs5996]

How much to build me a setup? I will be purchasing Ford Transit soon & want to budget everything. Thank you

[@RaldasDetails]

Send an email for price at [e-mail]

[@michaeljackson6507]

Hey I have a 2004 crown Vick how can I put a detailing set up in my trunk I have a nice big trunk

[@swaveyymike]

First link comes with the attachment for outside or have to order it on other link ?

[@carloscardona5631]

Nice looks good 👍 how much for that setup?

[@RaldasDetails]

For price [e-mail]

[@steperez84]

Saludos hermano, espero y confío que se encuentre bien, soy su fan #1 y me encantan sus trabajos y videos, una pregunta, cuantos vehículos se pueden detallar (lavar) con ese tanque de 65 galones. Soy de Woodbridge VA y próximamente comenzaré a dar servicio en el area( part time). Cualquier información y consejos son bienvenidos. Mi meta es comprar una mini van en un futuro no muy lejano. Bendiciones

[@RaldasDetails]

Gracias hermano puedes lavar unos 5 o 6 carros dependiendo el servicio full detallado unos 3 máximo porq se usa más agua

[@manuelarzola1898]

Donde compraste la parte que pusiste por fuera de la van

[@RaldasDetails]

Los links están en la descripción del video

[@josephmontoya3090]

Would this system work if i have a portable water softener attached?

[@RaldasDetails]

Yes it will

[@egocmen3795]

Tony, my water tank is 50 Gal, but with the float valve and the elevated exit piping, I’ll get around 35-40 Gal. Do you have any idea on how I can maximize the capacity? Thank you brother!

[@RaldasDetails]

I have I 50 on my other setup as well and it go up!

[@soniahernandez4168]

How to connect both this one and the other connection to the pressure washer

[@keviniglesias3590]

You guys sell the frame? Looking to buy one.

[@chivasmj89]

What brand, size and model is that water tank?

[@RaldasDetails]

65 gallons you can find it on tractor supply 👍🏻

[@sundeephegde6562]

Can u make a video of steam cleaner installation pls

[@RaldasDetails]

Sure brother as soon I get the opportunity to do it I will! 👍🏼

[@bert4910]

Is there a link to the float valve? thx

[@RaldasDetails]

amzn.to/3f7d8nC

[@RaldasDetails]

Here brother!

[@bert4910]

@@RaldasDetails Perfect! Thank you!

[@abuamir6505]

😍

[@andyreyes1790]

Im interesting to do a setup on my 2004 dodge ram

[@KingTheDetailer]

How many gallons of water is that tank ?

[@RaldasDetails]

65

[@ceciliocamacho2450]

Me gustaría q también i sieras videos en español tu asentó se escucha q también ablas español yo también se inglés

[@RaldasDetails]

Si hago videos en español tambien los puesdes encontrar en mi canal gracias pot ver!!

[@1stfrompuertorico568]

1st

[@RaldasDetails]

Weit lakil thanks for watching!