How to Install the NEW Eureka Mignon King Sized Dial

[@klaushuber1499]

Thx for pointing out this alternative. I'm using the "ARO Espresso Grinder Setting Dial for Eureka Mignon" instead. Because of the much bigger gear ratio from the knob to the dial, the setting is also very precise and repeatable. And it doesn't look or feel cheap also.

[@dselevan1]

I have this one also. Trying to decide if I should get the official one or not. It is a hassle removing it to clean the machine

[@klaushuber1499]

@@dselevan1 Yes removing is more difficult with the ARO. I don't have much coffee powder in that 'region' of the grinder. But I sometimes simply take a brush and the vacuum and go over the whole grinder to get rid of it. Maybe you could try to only loosen the screw at the back, to lift the big wheel a bit. So you can get under it without a complete removal.

[@DuBstep115]

​@@klaushuber1499still 100x better product

[@flowum]

Thanks Tom for the delivery, the King Size Dial arrived today. I was a bit hesitant if it would work with the bigger dial on the Mignon Zero. The good news is that it works, thanks to the smaller replacement dial that's included.

[@chriskvikstad4980]

I have been looking at the aluminum version of the ARO but I like that this is actually OEM from Eureka. Whenever you say the word "excellent" it reminds me of Mr. Burns from The Simpsons. I like your subtle sense of humor. 😂

[@TomsCoffeeCorner]

@@chriskvikstad4980 Haha, yes that’s supposed to be Mr. Burns. I prefer the manufacturer’s solution, too.

[@freightdawg6762]

First thing i ordered after i got my Specialita its a must, highly recommend the Bellows too

[@Robin77436]

Thanks a lot for this tip, and overall thank you for keeping us informed of all news about coffee machines! 😊

[@lenso010]

I did that 2 years ago from steel. It works perfect.

[@stefvdo]

Thank you Tom for the tutorial, super as always. I put an order on to support the channel! Just one question: are you still able to open the grinder with the knob on or do you need to do extra steps to remove the top cover?

[@UnusedNamestill]

The Helios needs this too.

[@Евгений-м3ч4д]

They finally made it.

[@nghtrdr]

Can't find an English version of their web page! Do you know if there is one?

[@Tony-sy7ed]

Haha that’s cute. “ARO” Eureka mignon grinder dial. Mic drop 🎤

[@TomsCoffeeCorner]

Aro is more expensive though and has 3D printed plastic as a touch point. I prefer aluminum. Just wish this dial was multitudinous, but the ARO isn’t either.

[@dselevan1]

@@TomsCoffeeCornerhi Tom from the USA. Writing from Greece on vacation. I have the Aro aluminum version of their dial. It is quite nice. Would this #kingsizeddial be an upgrade? I was always assuming eureka would come out with one some day and I don’t like having to remove the dial to clean my machine. If you already had the aluminum Aro, would you keep that or get this? Does it make it simpler to clean?

[@coffeenation-1]

FAST 100k ERREICHT TOM!

[@TomsCoffeeCorner]

Haha, ja fuin' dank, i gfrei mi!

[@Julian-th7qn]

Uuuh, nice. Do you have any experience/testing how good the re-dial is now possible e.g. for switching between beans?

[@No1specialatall]

Nicer than the one I bought off etsy....will be curious about the cost

[@ffsolutions9442]

Nice one, I would love to get one from you Tom, but no shipping to Bulgaria? The other Link you provided also has them out of stock now. 😮

[@eshtal]

no delivery to `uk ?

[@allanbailey5179]

Great video, very helpful thank you.

[@kellydavis3108]

"So they want a bigger dial, eh?" Gets manhole cover.

[@bikesforme7922]

when set to zero hear the burrs mesh, no? i would rather turn the grinder motor manually and slowly for a finer adjustment

[@kitcraft9516]

Oh, this is nice and speaking of Eureka, I have a question. My wife and I are moving back to Europe, so I need to rebuy my espresso setup. Thoughts on a Bambino, Eureka Manuale and Fellow kettle at the same price as a Barista Pro? I was thinking that the separates will make at least marginally better espresso, but the Pro is just such a clean package and as an apartment dweller counter space is a premium. For some background. I do have a Barista pro now in the States, a Bambino Plus at the office and a Flair 58. I already use the Barista Pro the most, well, at home and really have no real complaints (not as consistent as the Flair and K6 but not world changingly different either). Thanks for any advice you can offer. Also, as always, I enjoyed the video, and that knob seems like a must!

[@TomsCoffeeCorner]

Honestly, I'd suggest getting a Pro over in Europe. It's better than the Bambino Plus, in that you can change the temp, and that rather easily. The grinder is fine in my opinion, and it uses the updated Baratza burrs now. You can bring your Flair with you, as its power brick can switch between US and EU voltages. Cheers!

[@kitcraft9516]

@@TomsCoffeeCorner Thanks, Tom! Thanks for the suggestion on the 58 too!

[@imjustcasey]

Hey Tom, question for you. I’m trying to decide between the Baratza Encore ESP and the DF54 but can’t find any comparison between these two. Trust your review more than anybody else’s due to the great detail and explanations with your videos. What would you recommend?

[@TomsCoffeeCorner]

@@imjustcasey DF54 is nicer across the board, as long as you are OK with single dosing.

[@imjustcasey]

@@TomsCoffeeCorner Thank you so much!!

[@oldgarnek]

Submitted for one to Poland :)

[@andreyogogo]

Very cool!

[@weeksy79]

Not available anywhere else online, and even the website linked now has the listing all messed up xD the Mignon dial is cursed!

[@Ric-Roze]

Very nice

[@clashaustralia]

Great. #KingSizedDial Need to get this!

[@ishaya.]

Too late , at least for me. Already have from Etsy a dialing set. Works great.

[@irregularstar2399]

Would this work for Perfetto? I think my perfetto has a different kind of dial but I'm not sure.

[@TomsCoffeeCorner]

No, it doesn't work on the Perfetto or Brew Pro.

[@andreihritcu5220]

I would like to buy 2 for Romania but it does not appear on the list of countries on your for sale page

[@TomsCoffeeCorner]

Hi there! I'll open up for Romania. If you order two, then even better, because then postage is easier. Postage would be 11 euros. Please check the link again: tomscoffeecorner.com/eureka-mignon-king-sized-dial-is-here/

[@HenryKo-n9r]

@@TomsCoffeeCorner i would like to get one as well, would you open for Hong Kong? it is quite hard to find accessories for Eureka in Asia tho

[@HenryKo-n9r]

@@TomsCoffeeCorner it does works for Zero right...? Thank you!

[@mrseahunter1]

OMG i want/need this for my Libra , request sent Hello from Canada

[@Shadowguy456234]

Second :) Great news, thanks Tom!

[@TomsCoffeeCorner]

Yes, it's a sweet knob!

[@tommuller6136]

i thinks its better for dialing in. But sad that there is no revolution counter of some sort ^^

[@TomsCoffeeCorner]

I agree with you on that one!

[@geomcl]

#KingSizedDial from Scotland

[@GriuGriu64]

Part number?

[@Robby_S.]

#KingSizedDial Germany 🇩🇪

[@clashaustralia]

Need sales shipping to Australia…

[@TomsCoffeeCorner]

@@clashaustralia Howdy! Shipping would be €13.50 without tracking. Tracking would be another €14, so pretty expensive. Would that still be interesting?

[@clashaustralia]

@@TomsCoffeeCorner thx. That takes it to about $65 AUD which is a lot. Hopefully some Aussie dealers ship some over. Really appreciate your videos and the responses. Thx again.

[@TomsCoffeeCorner]

@@clashaustralia a few years ago, it used to be much cheaper. I could ship something small, tracked, for only seven euros anywhere in the world. Unfortunately, DHL has changed things and that service is no longer offered. But I bet some service dealers for Eureka in Australia will get stocked up soon enough.

[@whatruta]

LAST!! so far!!

[@coffeenation-1]

FIRST!