How To Install The Safetots Wooden Multi Panel Wall Mounting Kit | Safetots

[@georgiaraiser1730]

We can’t find instructions anywhere which reflect how to fit this on a wall with skirting board. Please can someone help? Not sure anyone is realistically attaching these to flush walls with no skirting unless everyone’s having to rip them off to prep?

[@Safetots1]

Hi, thanks for the enquiry. The Wall Mounting Kit does work with skirting boards. The Kit has two spindles, top and bottom, which can be adjusted out to different lengths. Just connect the fitting to the skirting board and the wall at the correct heights, and wind the top spindle out further to reach the top fitting. Many thanks Peter

[@TheWizza33]

⁠​⁠@@Safetots1hi Peter, I’d like to know how high you’ve measured the bottom two screws from the floor? We all have different height skirting boards with different size/shape architrave on these days. Many thanks

[@Safetots1]

@@TheWizza33 Hi, Please take a look at the instructsions which shows the height of the fittings - drive.google.com/file/d/1tAspo_gXodQK1pvMhfPxz1uD6WnXWxOd/view?pli=1 We also sell a 'Spacer' set www.safetots.co.uk/safetots-retractable-gate-spacers-white.html?_gl=1*1045c0q*_up*MQ..&gclid=Cj0KCQjw05i4BhDiARIsAB_2wfAVpB0PFzn3OFKJuioNXoECgMiHT9n6hOmWgij39_Nx8KSR7APfZCsaAp_6EALw_wcB This is a simple block which can be connected to the wall, which fills the gap of skirting boards. Thanks Peter

[@TheWizza33]

@@Safetots1 thanks, that doesn’t really answer my question. What are the measurements needed to drill the holes into the wall from the floor.please.

[@Safetots1]

@@TheWizza33 Sorry. For the bottom fixings, there are 2 screws required. The lower screw is 87mm off the floor.

[@lions87]

Hi, I noticed on one of the product images (for the Safetots Wooden Multi Panel Room Divider Range) that it says 'do not fit in a straight line, allow extra length for angles'. I'm ideally looking to buy one that will make as straight a line across the room as possible, but I assume this text is explaining that you don't want to exactly match the room width? Is it suggesting that it might put undue strain on the room divider if I ordered that exact width of the room, perhaps I should add 5-10cm?

[@Safetots1]

Hi, it depends on how long the opening is. We suggest approximately 10% extra. Please call our customer service team on 0143872888 for advice. Thanks Safetots

[@jpaube1]

can that wall mount be fitted at a 90 degree angle to the gate?

[@Safetots1]

Hi, The wall mounting kit comes directly from the wall at 90 degrees, the wall mounting kit is approx 8cm deep. The wall mounting kit will connect to the first panel, and that can be angled at that join how you wish. If you require any further information please cal our customer service team on 01438728888. Many thanks Safetots