How to install the USB socket accessory on your Aprilia RS660 | Step by step guide.

[@kendoonan2484]

No rooters were injured in the making of this video... Tidy job. Very neat.

[@BT-hj3yw]

Thank you! Helpful guide. I havent added the kit my bike yet. But pushing the rubber gasket + bracket unit over the usb box was definitely a challenge. Took me some fiddling but, I was finally able to push through the process.

[@martynspangles]

I wasn't aware there was a kit for a USB socket! It's a must buy for me. Cheers for the video.

[@paulrodgers9162]

It’s the simple things in life Dave that bring us guys unstuck 😆, nice job 👍 regards Paul

[@WheelieGoodTV]

🤣🤣👍🏍

[@ChaseJasperDown]

I actually really like that location for it. That was a great how to! Thanks for sharing!!!

[@WheelieGoodTV]

Cheers Jasper!

[@hoky4545]

thanks for the video mate, now all i have to do is get the license to ride and buy an RS660

[@WheelieGoodTV]

👌 Cheers man. Good luck.

[@ianjoe9909]

Muy buenos videos, siempre me han servido de mucho in my Aprilia Acid Gold, saludos desde Miami fl ✌️

[@andrewgardiner5693]

Thanks for the video. Was very helpful!

[@WheelieGoodTV]

Cheers Andrew.👌

[@the_mad_leprechaun]

Nice one Dave! 👍

[@rayraykon1441]

Great Vid Dave enjoyed it and was looking for an easy way to get a USB on my dash without having to run the line from the battery! Absolutely stupendous! Bravo! Where did you get the USB outlet from?

[@WheelieGoodTV]

Thanks! I got it from www.scooters.co.uk

[@Brenno097]

​@@WheelieGoodTV have you found any power cuts or problems since installing. As I've read that that pin is connected to the same terminal where you have lights and other important things. So my understanding is that if drawing too much power it can cause whole dash/ or signals to fail as well

[@danielionanov5620]

Huge video thanks mate

[@kendoonan2484]

I'm still wondering what that first loose connection you found is for🤔 That sets off my OCD ..🙆‍♂️😜

[@WheelieGoodTV]

To put you at ease Ken, I believe it’s for heated grips. 😮‍💨

[@StintStier]

It's for the anti theft system status light. I have installed it.

[@WheelieGoodTV]

@@StintStier ah ha, thanks for clarifying that. 👍🏍

[@Mehmet-uy8cr]

I am planning on buying this bike and adding this usb socket. Too bad Aprilia didnt add it by factory.

[@FreeMindAdvoates]

Great video and super helpful! Thanks man!

[@WheelieGoodTV]

Welcome bud.🙏

[@australien7922]

New subscriber here! :-) Fantastic tutorial! Something I will be saving for later. Sorry if this was answered elsewhere, but where did you get that USB kit from? I tried looking online and wasn't very successful. Thanks in advance.

[@WheelieGoodTV]

Hi Andrew and many thanks for your kind words. I bought it from www.scooters.co.uk Cheers, Dave.

[@australien7922]

@@WheelieGoodTV Thanks so much for the quick reply. Now to add it to my list of accessories and mods.

[@Brenno097]

​@Wheelie Good TV have you found any power cuts or problems since installing. As I've read that that pin is connected to the same terminal where you have lights and other important things. So my understanding is that if drawing too much power it can cause whole dash/ or signals to fail as well

[@WheelieGoodTV]

Hi Brendan, no such problems fortunately. It has worked perfectly since installing. 🤗👍

[@st1ll_human]

Great video thank you!!

[@WheelieGoodTV]

Cheers!

[@AuldhannRua]

Nicely done

[@labrador3473]

great work, thank you, that was amazing support for us

[@WheelieGoodTV]

You’re welcome bud.👍🏍

[@MrJwats1973]

I'm digging the cellphone attachment rig, where'd you pick that up?

[@WheelieGoodTV]

That’s the Quad Lock system. Superb! They have a website which I bought it from and got it a few days later. Rock solid even after a year of chucking the bike around.👍🏍

[@rokndrol]

Hi, clearly that is a specific USB Socket Accessory kit that is designed to plug straight into the available socket on the 660. What is the name of the kit ... I am not having any luck finding it.

[@WheelieGoodTV]

Hi Tom. Here is the link for it. scooters.co.uk/item/usb-accessory-charging-socket-aprilia-rs660/

[@rokndrol]

@@WheelieGoodTV Thank you!

[@DearMajesty]

Where did you use the supplied ziptie? Not sure where/how to use it haha

[@WheelieGoodTV]

Don’t think I bothered…..

[@DearMajesty]

@@WheelieGoodTV right on lol yeah it doesn't seem necessary! All mounted up now anyhow haha!

[@DearMajesty]

Thanks!

[@WheelieGoodTV]

👍🎥

[@dr.ptrkjc]

the instructions that came with it has poor illustrations making it difficult to understand.

[@WheelieGoodTV]

Yep, that’s why I made this vid.😜👍

[@superstarsfastcars]

Why did you have to install it this way? I saw another video where there is already a cut out on the left side of the dash for the USB to go. You just remove the cover and the plug is behind it. But then I looked at the pdf instructions online and it shows the way you did it. I am totally confused??!? Are there two different bike models or what?

[@WheelieGoodTV]

I suspect this is for American versus European versions.

[@superstarsfastcars]

@@WheelieGoodTV so of course I did not pay attention to the title 😆. You have the RS and I have the Tuono. That is the difference. 🤦🏾‍♂️. Much easier to install in the Tuono and $10 cheaper because you do not need the metal bracket.

[@aliozler1305]

Its that the usb port from aprillia store

[@WheelieGoodTV]

Yes it is but I purchased mine from Midland Scooter Centre in the UK.

[@daithimurphy1832]

Looks really tidy. Pity more manufacturers don't do the same

[@zbski2]

혹시 내가 비용을 지불할테니 한국으로 하나를 보내주실수 있나요? 구입하고 싶지만 한국으로 배송해주는곳이 없습니다 가능하시다면 이메일 주소 부탁드립니다.

[@WheelieGoodTV]

Exactly.👍🎥

[@mathieuheslon9323]

Merci 👍🇨🇵

[@WheelieGoodTV]

👍🇮🇪

[@taz473]

👍