How to install type s aspec on base tl(04-06) insTL

[@alexisguerrero6143]

Hey man dope video I've been looking for that lip. Where did you find yours?

[@josethebest97]

now time to add the fog lights. have you done the back bumper yet?

[@cre8tivegarage157]

Thanks for bringing us yet another vibe 🥂 enjoyed

[@milton45690]

Nice instal bro, I'm thinking about doing this too. Have you bottom installed fog lights yet?

[@Jfivee_]

I need that bracket or something similar to adapt it to the bumper asap? Any ideas ? 7:33

[@safayatkhan2280]

Can i put on an A spec lip on my base 08 TL?

[@AgntSlver899]

hey man, I just installed this lip.. what are the 2 brackets for, and how are they installed? they dont match up to any holes on the bumper.. in your video you don't really show that part

[@iSaCkNeWtOn206]

Keep up the good work!

[@mitchsfarm]

Wow, I have a 05 base TL and I really couldn't find a lip that I enjoy... fuck dude, I think I'm gonna buy one of these.

[@hdua6772]

mitchsfarm yea these are the only one that looks good in my opinion! the second best are the base aspec lip

[@mitchsfarm]

I'm just order'd Vossens for mine and I'm gonna lower it 2 inches. Gonna do this mod I think, how big are the holes for the fogs? I think I'm gonna stuff them with L.E.D lights and run a switch to my dash cause they the fuck not, make it look not as empty.

[@VicsBadminton]

mitchsfarm x

[@Dededaisygurl85]

nice! good job, now i wana do that to mine. lol

[@Fula809]

6:40 seconds you talk about some brackets what’s the names and where can I find them

[@aaronthemartialmechanic893]

Dos you ever find out?

[@RazzyJFresh-sc8sr]

I have a 2004 TL base with 2007-2008 OEM ASPEC TYPE- S front lip. If im not mistaken it looks just like that one you have. Question is, i need extra foglights. Since when i bought my car it was already installed. And everytime i look online they show me round foglights. But mines look a bit oval. How did u find yours? Thanx

[@greelanter]

Can you share the link so I can purchase the type s complete kit for my tl?

[@hdua6772]

you can get them from endlessrpm or heeltoe. if you want the whole body make sure you buy them together lol its cheaper that way.

[@greelanter]

HDs vids Thank you sir.

[@ImSoFlyAK]

Where did you buy the aspec lip from and did it come in the polished black?

[@hdua6772]

you can get them from endlessrpm or heeltoe. if you want the whole body make sure you buy them together lol its cheaper that way.

[@eddygolder5721]

I bought a 05 Tl and it has an a-spec lip like yours and the lights were able to turn on and off, but I recently changed the battery for my car and now the light from my apsec bumper doesn't turn on anymore, any solutions?

[@hdua6772]

If you’re talking about the fog light down in the bumper then most likely it’s aftermarket. Make sure who ever installed the battery hook the wire back

[@Randomguy-kn3nv]

Stupid question but is this the base bumper or the type s bumper? (Ik this aspec lip kit is for type s) like did u change ur base bumper to a type s one for this

[@hdua6772]

Nah man not a stupid question lol and yeah it’s a base bumper. Before there were people saying you can’t fit the type s aspec on-to base so I made a vid to prove them wrong

[@iv-godly4768]

Where did you buy your kit im trying to buy one

[@shawnstreeter3474]

Do u need to do cutting for the regular aspec kit?

[@welchjames1168]

Can a A SPEC type S 2008 front lip fit a base model 2008 ?

[@TheDerrty111]

Yes of course

[@GLOCKZEVOZ9C]

Hey, just to clarify this was lip was installed on the 2004-2006 style bumper correct!? If so how well has it held up as far as fitment and holding where the 3M tape is? Thanks!

[@EMCFilmz]

Great video but if someone recorded for you this video would of been better

[@hdua6772]

thank you for your feed back. I am still new at this and had no one else to help lol I will eventually buy a better camera and mount so i can record by myself.

[@tyee1856]

Where can I buy that front piece

[@bvrbanbeats8258]

Hey bro where did you order the lip?

[@Schafferr]

Hey when you ordered this on endless rpm did you select “base model 04-06 front”?

[@hdua6772]

No it’s for 07 08 type s but I install it on a base 04-06 bumper lol

[@Schafferr]

@@hdua6772 is everything the same fit except the fogs?

[@hdua6772]

You’ll have to cut the fog light area is about it if I remember correctly.

[@jerryseinfield2780]

bro I cannot find this anywhere looks so dope tho

[@TechSpertiseTv]

Legit, nice video bro, very instructive

[@Yoo_Space]

So you didn’t have a gap above the headlights?

[@goldodabest8862]

Were can I order the bracket kit you have for that front lip I dont know were to look if anyone can help thanks.

[@hdua6772]

It should’ve come with the lip

[@twistofj4328]

what tool did u use to cut the bumper with so the fog lights fit and do the fog lights come with or separate

[@hdua6772]

Jermo Blatant i don't have fog light YET. and I'd use a Dremelto cut. the fog light i would have to buy separately. but when i get it I'll definitely make a vid on it lol

[@twistofj4328]

HDs vids ard coo n im assuming the rear aspec is just as easy

[@hdua6772]

Jermo Blatant nope! its easier!

[@JeanPierreKrozendijk]

Huy Do no fog lamp install vid yet??

[@brayanmorales2893]

Huy Do where do you find the bumper?

[@Oneforhappy]

Where I can get aspec lip kit huy?. Thank you.

[@rum_on_you]

Fantastic video.

[@hdua6772]

thanks alot!qill make more vids after i get my car back

[@thomasphayboun]

yo cuz, you gonna paint that lip to match? And is there another way to do this for the Sorona Lip?

[@hdua6772]

yes i will paint the lip to match. and idk about sorona lol sorry bro

[@lalololo6203]

Bro, where did you get the lip from?

[@isaiahmota8898]

What you do again

[@chrisseanp8901]

How low did you drop your car? I have the same TL with the factory 17’s. And wanted to know how low can I go without rubbing.

[@doughboyjoe6518]

T G I dropped my 2 inches without the lip and ran pretty good. Expect over bumps and hills and shit there’s no escaping that. But now that I run a lip it’s hell being low

[@locdogwitd9]

Should I cut where u cut? I have an 06

[@hdua6772]

Yes

[@marshallmulgrave2665]

Hey can you send me the link of where did you buy that

[@hdua6772]

I believe it is now discontinued

[@Arnolschuachenegga]

Is your Acura automatic?

[@jron702]

where did you buy this part

[@BuiltByGhostt]

were you get it from?

[@Finz235]

So it does fit, just need to make brackets? Someone reply ASAP Please

[@hdua6772]

No need it'll come with everything. You'll just have to cut the bumper

[@jramos102]

Wait so the cutting was just for the fog lights ? Other then that it sticks on with the tape from the aspec ?

[@josethebest97]

jramos102 yea pretty much, but if you dont cut it wont fit in.

[@ricardopaulino4170]

Bro I can see your from New York I would like for you too installed this on my 05 TL I’m from New York as well can we set up a meeting ? 😊

[@chrismenjivar690]

Where u got the lip front ?

[@hdua6772]

Discontinued

[@ellokotony3096]

Anda where anda how u get u intall the fog lughts

[@Sounga74]

Was this lip OEM or aftermarket?

[@hdua6772]

Merdoc Avila oem

[@armandoa7297]

Link to buy the lip?

[@TheGPR12]

Where did you buy the lip?

[@quannelquan3203]

Where can i get the full all around A-spec kit???

[@Steeda04SVT]

Good luck finding it. Hard as hell to find. Keep an eye on your local pick n pulls as well

[@hdua6772]

Yep. It’s hard to find now

[@Steeda04SVT]

@@hdua6772 the guys on Facebook selling them have them marked up like crazy too.

[@hdua6772]

@@Steeda04SVT it’s insane how some people buy multiple last one from their dealer just to mark it up twice the original price. They’re a bunch of cunts

[@Steeda04SVT]

@@hdua6772 amen to that. Couldn’t agree more about them assholes. Can’t find any 04-06 lips so might go your route and try to find one and cut into my oem bumper as well. Keep up the great work and keep the vids coming. 🍻

[@ceciliareyes9356]

What's all the hardware needed to do this? I'm gonna do the same so I'm just wondering to know what is needed

[@hdua6772]

Cecilia Reyes Dremel to cut and screw driver to remove the bumper! pretty easy

[@RayCastellanos]

Where can i get the aspec lip kit? Anyone?

[@TMGONZALEZ123]

Where did you buy this?

[@Aero_HER_Dynamic]

Can I just buy the whole type s bumper and it be a direct fit?

[@Tensei07]

Yes the types bumper is a direct fit for the type s lip with no modification

[@Aero_HER_Dynamic]

Taylor Nguyen thanx👌🏽💯

[@Tensei07]

No problem let me know if you need any lips i have a seller that sells oem for good price

[@Aero_HER_Dynamic]

Taylor Nguyen Mos def....if I can’t find the type s then I’ll get with u.

[@Tensei07]

Alrighty

[@kaydenpryor5857]

Where did you buy the aspec?

[@hdua6772]

Kayden Pryor endlessrpm

[@Sounga74]

Will this be the same on a 08 TL Type S?

[@hdua6772]

Merdoc Avila I believe so but don’t think you have to cut much on the 08

[@Sounga74]

Okay cool

[@ralfster139]

where can i get one of those?

[@jmballin4897]

Did u install fog lights?

[@hdua6772]

JMBallin nah I decided to leave it for more air passage

[@kaushiknair510]

you in the bay area??

[@hdua6772]

Atl

[@kaushiknair510]

@@hdua6772 oh shit nice man! ATL is on my bucket list aha

[@hdua6772]

If you don’t mind the traffic yeah it’s a great place for car people lol

[@kaushiknair510]

@@hdua6772 Travel for sure 😬😬😬😬

[@Jordanethix]

Do the fog lights face down from how the bumper sits on the base tl? Also how do the fog lights fit on the Lip? are they screwed in or something? Thanks about to do this soon

[@lbeyyt6581]

Cable Wraps did you ever find this out? Wanting to know

[@Smokesuminc]

Thank you !!!!

[@kevinfigueroa2177]

More vids bro!🔥

[@hdua6772]

Kevin Figueroa cars getting a new clutch at the moment lol will be reviewing my tl when its done

[@lsdtripz1161]

Did u ever fix your screen?

[@lsdtripz1161]

For your navigation

[@iggy2324]

Can you pls tell me where you purchased your bumper so I can buy one for my 06 Acura TL an will the espec fit on an 06?

[@BFMV2xETFx7BMTH]

EndlessRpm sells them or heeltoeauto. I don't think it will fit perfectly that why the guy in the video is cutting it since you might need to do the same but i think its only for the 2006 TL that you need to do that.

[@xzavierhoppins6136]

BFMV2xETFx7BMTH I’m looking for the whole bumper not what he has

[@nathanburrell7]

Just remember if your TL has headlights you won’t need to be cutting up your bumper

[@nathanburrell7]

Fog lights**

[@jacobc.8489]

exaust system bro!? what is it!?

[@kingflo3581]

What year aspec type s is this

[@hdua6772]

King Flo 3rd gen type s are only 07 and 08

[@cdavid001]

Think it would have been a little easier if you would had just bought S-Type bumper just mount no cutting..

[@lbeyyt6581]

cdavid 757 more expensive

[@TheBaIIs]

I heard that loud fart at 6:03 stop eating all that Chinese food

[@kevent223]

Poor camera angles. 😂

[@tonyflores80]

Damn I got dizzy watching this video...horrible camera skills.

[@hdua6772]

tonyflores80 appreciation the feed back

[@chrisvasquez3703]

Jesus fucking Christ what’s up with the shaking

[@yousufkhan02]

learn how to use a camera

[@ricardopaulino4170]

Video not to clear on how to install should have had someone record while u do the work 🤔

[@bradygivens2413]

Where did u get this

[@sanjuan3944]

Where I can get that ???

[@comandante2957]

How can I find that lip

[@hdua6772]

They’re discontinued now. Some dealer might still have them. Give your local Acura a call and see. You can try the used market but they’re like double the price now