How to install your TFL Float blocks

[@DaxtoBuffCuan]

Literally standing over my disassembled board about to tackle this when the notification that this video was posted 👌🏼👌🏼👌🏼

[@TheFloatLife]

Perfect timing!

[@markuschelios6891]

@@TheFloatLife I had just reassembled my board after badgering it when I heard about the float blocks. Oh well...

[@fixmypev]

Need to try out a set of these on my demo board! 🤙🏼⚡️🛠️

[@buggle96]

Ordered these this week from C&R. Searched everywhere for an install and if they would work with Cold Ones. TFL confirmed float blocks do work with Cold Ones. And here is the video I needed, lol

[@galacticom]

got my FDA approved Lowrider Kit Float Blocks installed on my GT-S today... It took me about two hours of fiddling... this video helped a bit, as I did not see a video for the same product... either way, I ride on flat neighborhood streets, and like being lower to the ground... though, we'll see if I go back to the original default GT-S configuration, as I was getting used it... I had the Land&Surf VRH on my old GT, and I did not like that I had to cut the deletes, so I opted on your system... however, I purchased some expensive Titanium axle bolts prior to purchasing your Float Blocks, and now I can not use them, as they are too long. I have no issues sacrificing the Mag Handle...

[@ahennen69]

Just in time, mine showed up today!

[@obiwan-wheel8113]

OOOOOH! Mag handle. I wrecked my brain wondering where those grommets went. I don’t run a mag handle😂

[@OtherTaylor]

Waiting for your comments on the GT-S 🤓

[@-JohnSmith-]

Missed an opportunity with Cosk-blocks®️

[@BenjaminTemplar]

What are the Float Blocks for?

[@fixmypev]

Dual purpose. First, they rotate the axle 90° which strengthens the structure while riding (this also gives you more motor cable slack for aftermarket rail installs). Second, they offer additional cooling due to the built in fins. Hope this helps! 🤙🏼⚡️🛠️

[@masonnoodles]

@@fixmypevthat helped me thank you!

[@TattedTommysTv]

I done lost mine bout to order one be looking for it lol….Vrap TFL fo life Jeff I’m trying to build my ultimate board wanting to hit 40mph riding lightning which drop kit would you prefer float wheel or the gt/gts and should I vesc or go stock bms and intervals to which ever I decide? Thoughts ?

[@lukeridess]

Since FM released the torque specs for the hub bolts on the GT, would those torque specs work for both the inner and outer bolts on float blocks?

[@bryantrush6844]

Did Jeff install the rail upside down? 😅

[@KDelta2]

The mag handle at the end looked upside down

[@KDelta2]

But it's Jeff, so it's cool

[@mattklein6212]

Are these compatible with the 6" Rally? And are Life Savers compatible with my 6" PT (as long as I am taking the wheel off, might as well torture myself a bit with the tire if they're compatible)?

[@TFLcustomercare]

Thanks Jeff 😍

[@ihazhedont]

Small question (I know it's way past the release of that video), would it help significantly a vesc'd XR ? Many people are facing overheating issues with the hypercore and a powerful battery pack.

[@Zetler]

Can this be used on regular rails with a GTV?

[@wilmerroquel488]

What am I doing wrong, screws one side too long 😢

[@Strombonin_msm]

sick

[@pish9735]

How do you uninstall tho?

[@deanaoxo]

refining the board after they pumped it out. . .

[@quentinroberts2186]

Do these work alright with stock GT Rails?

[@TheFloatLife]

Yup!

[@renec5006]

Does the XR version work with maghandle

[@fixmypev]

The version that works with the XR is the Cold Blocks (which are not compatible with FM’s Maghandle Mount).

[@404blakson]

What is it for

[@fixmypev]

Float Blocks (GT/GT-S Compatible) solve 3 issues that are prevalent on the Onewheel™️ GT. 1) Extend short motor cable by 1/4" 2) Increase axle strength by 69% (Jeff's face after Robert showed him the math on this 🤯) 3) Improved heat dissipation through integrated cooling fins

[@chickenbriar]

Do you have to take a rail off?

[@markuschelios6891]

Yes. The rail no longer attaches to the axle. It is bolted to the block.

[@michaelbabbel]

Is it necessary to disassemble the rails in order to get the wheel with float blocks into the board??

[@chickenbriar]

​@@michaelbabbeljust one rail

[@dezh2544]

How’s everyone feeling about the new announcement? Lot of guys on here with some weak boards in comparison 😂😮😮