HOW TO INSULATE A METAL GARAGE

Finally got around to wiring the garage and installing insulation! I used R-13 Batts and 3M Super 77 Adhesive. Turned out really well and the garage is finally warmer!
THANKS FOR WATCHING!!!
PLEASE LIKE, SUBSCRIBE, AND COMMENT BELOW
Follow Me:
Instagram: coffey68
Snapchat: coffey68

[@paulwatson4189]

Retired drywall man here.Please wait on putting anything over the insulation . The moisture off the metal will soak the insulation. If you add drywall over the insulation you will have double trouble. Before you add any covering plywood / chipboard or drywall you will need deadwood blocking in most of the area's in the corner's and around the ceiling. You will need to run 1 by 4 wood strip's over the metal before you can do anything. The 4 by 8 insulation panel's 3 in thick is what you needed but I understand trying to insulate on the cheaper side. They also make a insulation made just for building like your's. Not trying to be a downer because it look's nice but please wait on covering the walls for a little bit. It may save you a ton of work and money in the long run.

[@darrenwarren2162]

I got a question for you sir, does the same technique that you suggested apply to the inside of the metal roof in the garage? I just got a metal garage and trying to find what works and most importantly what lasts. I like his idea but after reading your post I'm a little hesitant. Thanks in advance

[@hopechannelcat5462]

really impressed with the glue and the speed. great job

[@Tiersmoke92555]

We have used furring strips, batten boards, and pipe support straps to hold insulation in place.

[@eddygoodwin7089]

Hey man looking sweet. Not sure what you got planned for hanging drywall but I was gonna mention using that bubble foil as a vapor barrier and then run 1x4 perpendicular to the metal on 16 inch centers then hang the drywall. The air gap will make that fool work better it’s amazing how much radiant heat can be reflected back into a place.

[@YamRida468]

Eddy Goodwin thanks I appreciate it! And yeah I gotta put some vapor barrier up for sure and then drywall. But yeah that’s a good idea too I thought about doing that to mount the drywall to

[@OnHoldAt50]

OP post date 6-Feb-2020. Fast forward to May 2022. Did you find the Super77 held up so far? Have you had any problems with not applying a moisture barrier (double bubble radiant for example) first? Thanks for the time to produce and post this video. Super helpful!

[@garyhaber333]

Great job. I think I'm convinced about getting a metal garage now.

[@YamRida468]

Gary Haber thank you!! Smart choice hahaha hope it turns out awesome!

[@acetech9237]

Thanks for all the information from EVERYONE, this will save me a ton of trouble down the road. At least if this guy lives in New England, there's so little humidity year round, they'd be fine.

[@staffy4389]

Awesome, great to see young lads working hard. Watching this because I got a little shed that needs insulation.. my house would fit in your garage, 😂 but well done..

[@YamRida468]

Staffy haha thank you I appreciate that! Hopefully the video helps with your install!

[@1345mack]

I love your shop, you guys did an amazing job on it

[@YamRida468]

David Edmiston thank you!!

[@xcolombianphilix]

MOLD AND RUST HAVE ENTERED THE CHAT.

[@greenwave792]

That method will not work where I live. Could be fine where he is, I don’t know.

[@raymondyoder7095]

People do not do this the way they are ! You must put styrofoam or something between the metal and insulation because it is going to sweat and will mold terrible !

[@markm6444]

What would be the best way to insulate a metal building like this?

[@motopripravky]

@@markm6444 Insulate from outside.

[@markm6444]

@@motopripravky what do you mean?

[@heartland96a]

Hope you felt the warmth difference , both last winter and many to come . You can never have too many outlets or enough power . 110 is good but have at least one 220 is better.

[@YamRida468]

heartland96a thank you! And yes I agree hahaha

[@DougAlesUSA]

Next years video, how to remove moldy insulation.

[@joeykahng6219]

I was curious about condensation and possible mold. I was gonna ask, if he needed to place a barrier on first, before insulation.

[@theonetwistedking]

Yeah i was wonder where his vapor barrier was. Mold coming his way

[@jjs777fzr]

I think a closed cell foam would be best applied directly to the metal. Otherwise as you stated....beware mold.

[@DougAlesUSA]

jjs777fzr thank you. We agree mold will be a issue. Alternatives could include closed cell foam. Personally, I prefer a vapor barrier.

[@stevenhorsefield2909]

They make insulation that's made for metal walls. This isn't that stuff is for wood frame house.

[@torstenhansen4308]

Sorry to do this but as a word of caution to viewers who might choose to follow your directions, I have to rain on your parade. You are in a cold climate, the steel skin of your building is a vapor barrier and you are going to have condensation issues when water vapor reaches the metal. That is not a question of if but of how soon. How do I know? I do this for a living and know from experience (and building science) that fiber insulation just doesn’t work in this type of structure. You need an insulation system that prevents vapor from reaching cold surfaces and in reality that means closed cell spray foam. Yes, spray foam is more money up front but it works. If you continue down the path you are on now, you will end up ripping out your drywall and starting over.

[@YamRida468]

Torsten Hansen no worries appreciate the insight. I’m actually going to do a vapor barrier when I put drywall up

[@beastyfurkan]

Torsten Hansen Do you think adding a vapor barrier to the metal first using spray adhesive then adding insulation would be a good idea?

[@torstenhansen4308]

DIY BOSS, in short - no. As I described in my original comment, the exterior vapor barrier (the steel) in combination with permeable insulation is the problem and adding another one will have no effect at all. The only way to insulate your building properly is to use an air- and vapor impermeable insulation system (i.e. closed cell spray foam) that will keep moisture from reaching the steel in the first place. Adding an additional interior vapor barrier between the drywall and the insulation is not a good idea either as it will create a system that will be unable to dry out in any direction.

[@5PointSlow]

So the ONLY way to insulate a metal building is spray foam? Why do the metal building companies use a bubble wrap type insulation then?

[@NitasFluidWoodworks]

@@torstenhansen4308 I'm actually in the process of buying one similar "I think" and an worried about insulation as I work with epoxy.. so I need warmth and a finished interior.. Soo the company suggested that bubble wrap stuff. That's what they use on the ceilings. Why wouldn't that work

[@aaronschinlaub9704]

I was just going to say I haven't noticed if you've looked at your insulation or anything but keep an eye on it because these buildings have a tendency to sweat a lot when it gets hot and cold and I was either told to use a mineral wool insulation or spray foam mineral wool is very highly water repellent they told me if I used regular insulation it was orbit like a sponge and eventually mold mineral will not mold but I was just going to say keep an eye out on it love your videos keep doing them

[@stevengarman9112]

Im in the process of insulating my shop now. Im using just a simple radiant barrier with a lower r-value (I think r9) One side is white the other is reflective. This looks like it worked for you, I was concerned about the moisture barrier.

[@gbii8101]

Yea, I'm doing a install now on mine with foam board .. trying to decide if I need an air gap or can I just glue it flat against the metal sheeting ? Any ideas ?

[@xyzzzxyzzz6409]

@@gbii8101 Flat is fine. Cheers!

[@dusty6570]

@@gbii8101 Air gap.

[@Hammerjockeyrepair]

its been a year, peel back a piece of insulation from the roof paneling so you and the rest of us can see if theres been any moisture issues up there!

[@survivingsilverbay4734]

Well, he can't because it's already been recorded.its not live.

[@alvinkinds]

Wow man that’s awesome and thanks for sharing. 👍🏼👍🏼

[@jaybabcock4557]

I used 3/4 inch foam faced with radiant barrier. Looks much nicer and if it for any reason gets wet its no issue.

[@michaelking42]

I'm looking at this option right now. Did you install with an air gap? I see guys using 1x2 furring strips to create the air gap. How did you install and what would you do differently if doing again?

[@jaybabcock4557]

@@michaelking42 Any Air gap is just a place to lose heat. The foam board bends quit a bit and will bend and snap into the door frame.

[@markm6444]

​@@jaybabcock4557 an airgap is required for a thermal bridge to take place. The heat reflects off the radiant barrier. It's also good to have a gap to stop moisture and condensation issues.

[@sonjacreech6151]

I'd like to see it when you get done with the drywall. Good Job.

[@YamRida468]

sonja creech thank you!

[@Nolimitshere]

Same here I seen the other video u reviewing it.. and im.doing this year .. but i like to see drywalling ..os.already looking good im.already visualizing me working in it.. good job

[@letuspraythen]

Awesome work Dudes!!!

[@okhotrodder]

My shop is made the same way. Carport material. Very happy with it besides the spacing between the bracing. Made it extremely difficult to insulate and put walls up. All my vertical framing is between 52" and 59" apart so everything is off. I don't know why they didn't do 48" centers. If I knew then what I know now, I would've paid more to get the framing on 48" centers. Putting up r13 and 4x8 thermostat insulation has be a nightmare. Also my doors are the storage unit type roll up. I ordered extra large doors and spent thousands on them so I'm stuck with them for now. My advice, do not order roll up doors from the building company. Have your local garage door company put up nice rail type doors that fit tight against the frame and closes the air gap like you did. I spent over 50k on my building with no insulation, wiring, nothing. But I have 2k sqft. It's taken me 2 yrs to get the electrical done and now working on insulation/walls. Me being one person, it's hard work. But I've saved a ton doing it myself. Foam insulation just for the roof they quoted $6500. That's insane. I did r13 fiberglass on the walls and I'm doing bubble radiant barrier for the roof. Today I'm working on the mini split. Been weeks and still don't have it in. Going into winter and want heat so that's my goal the next few days.

[@kevinware4436]

Looks amazing bro, I like it

[@Shape_Is_Overrated]

Looking forward to seeing drywall. Im having a similar building installed in the south. Looks good! I'm adding the double bubble "insulation" more for a vapor barrier as well.

[@YamRida468]

Nicolas Smith thank you! And yeah I’m hoping to get it done sooner than later haha and yeah down south you need that!

[@MR.TOYBOX]

Place in georgia makes insulation with vapor barrier , insulation and white backing custom made into rolls same width as the rafters. 5ft. I am glad a watched this video. 3 m glue is a great idea.

[@YamRida468]

SouthernRC thank you!

[@diannesapp5984]

SouthernRC interested in linking up with 5ft insulation supplier . wm

[@eddygoodwin7089]

That double bubble is some pretty awesome stuff I never payed too much attention to it until recently. It is a good product makes a huge difference.

[@racker7855]

You can get trim from a metal roof place that will seal those gaps where the metal meets. Check them out so you seal it from bugs and stuff

[@YamRida468]

Racker okay thanks!

[@bionict-rex4326]

This will be a rusted out wreck in no time, lol.

[@richarddziadek]

Yup, I used a double sided foam board with glued standoffs one inch from the metal, and then did this with the fiber insulation. This way I have a heat barrier and a vapor barrier to prevent rust and mold.

[@arkansasboy45]

​@@richarddziadekHow is that method working for you so far?

[@richarddziadek]

Great! @@arkansasboy45

[@workingmansrestorations7071]

I would have never thought gluing to ceiling would work

[@jdisdetermined]

Not to be negative.. but I don’t think it will for very long with simple spray adhesive like that. I would be surprised if this installation was still holding up. Adhesive is probably failing or failed.

[@vinkobosnyak4463]

If you glue standard batts to the metal walls then dry wall over, what will happen if there is a leak from the outside? Will it not rot, as there is no vapour barrier, no gap to breathe?!

[@letuspraythen]

If you were a female, well you know what I mean. If you built a taller garage (or twice the size), would you have done this yourself? What about trapped heat and or moisture on the metal structure? How are you preventing this and or water damage? Thanks!

[@botravis597]

Nice, my building will be installed February,March 2021 in north Floridabut going to put something up ,Thanks

[@YamRida468]

Thanks and that’s awesome hope it turns out good!

[@tennwingman3350]

From experience with my own shop here in South Georgia, not worried so much with cold but triple digit temps in the summer, insulating that door will be worth every min. spent with it and its cheap and easy

[@mrnice88x]

Would spray foam be good to use for this? Thanks!

[@tommyforbidden3219]

Great job man 👍

[@YamRida468]

Tommy FORBIDDEN thank you!

[@merlincaren1]

After the insulation how's the temperature 🌡️🤒 like during summer 🌞⛱️?

[@schuck9326]

Thanks for the nice informative video. Any problems with sweating or anything? Thanks

[@rb.867]

What about the metal roof sweating and getting the insulation wet?

[@richardwright1819]

what size garage and how much did insulation cost to do it? Thanks

[@RCWeldingsgarage]

Hi nice video. Love the garage. So I'm currently extending my welding shop and I have been a approved by my city to add an additional 20x24ft garage. So I'm looking for something like yours. What company is your shop from? Ty

[@tonecapone9789]

Looks great can you post the finished product I am looking to do the same work and trying to get some ideas Love the craftsmanship take care brother

[@AndreaGrinoldsSoap]

I wonder if you could get that in like a non-aerosol application with a weed sprayer or something cuz that looks like it'll be super helpful on the ceiling

[@leudwigvonshwartsenhelm3624]

Ya can't do a video like this without a montage, good call.

[@MrBugman2525]

Very good preparation and information,would have been nice to have scaffolding

[@YamRida468]

Thanks!

[@protectandswerve]

I'd love to know how much insulation and spray adhesive you went through, so I'll know how much to buy. Thank you.

[@YamRida468]

Interceptor2500 it ended up being 6 cans of adhesive if I remember right. And it was 3 master bags of insulation. The ceiling insulation has fell in a few spots from the temp changes and the wind coming thru the top but I’ll put it back up when I do the ceiling

[@MarkThomas123]

Did you ever finish it up with plywood or Sheetrock? I don't see a problem with moisture myself.. The insulation should stop the condensation, since the temperature is going to slowly change between shop temp and into the insulation before getting to the outside metal sheeting.. But, we are curious to know how it is going after the time.. If you have time to do another video, go for it.. Something else to consider down the road for me.. I have never had in floor heating, but, it just makes sense to me and I built a Oil Burner that will do a nice job warming things up, ground up.. Thanks.. Nice shop/Garage.. Commented about using Silicone on the other video before I saw you had done it... You can drop some landscape fabric and gravel around the outside to stop the dirt splashing up.. Cheers!!

[@YamRida468]

Thank you! No I didn’t ever end up putting walls up and I actually took the insulation down because the glue was failing and falling down. Gonna spray foam next I think. In floor heating would be awesome

[@HumptyDumpty01]

This is going to be just fine and last a long time. Seen it this way in many old metal buildings.

[@georgekane1985]

I think your installation went pretty well and it looks good. I think over time, glue will not be enough to hold the ceiling panels in place. I’ve seen other installations where the that insulation starts to sag And separate. The price, less than $1000, is excellent.

[@VonEveric]

Definitely keen to see you put up the dry wall. So you routed all the electric cable behind the insulation?

[@YamRida468]

Jordan Von Buse thanks and yeah

[@guyh.4121]

How much cheaper is that than closed cell spray foam? Did you price that out?

[@kieran3169]

Hi mate. Great video! Have you had any issues with condensation? I've a 40x13ft to put up and looking for insulation as I had to leave my other (uninsulated) shed for 6 months during lockdown. Checked on it the other day and it was pooling with condensation. Luckily what I had stored was covered anyway but it did leave a puddle in a few areas and a very wet roof

[@YamRida468]

Thank you! And no I really haven’t but also haven’t been running my heat out there either so I’m not sure

[@tonygaines15]

@@ed1658 My thoughts exactly. When it's hot outside and cool inside...then your walls wills sweat! Also what impact would thermal bridging have?

[@RM-np1gm]

@Ed; Also the other way around, colder outside-warmer inside. My metal shed is 12x25, currently uninsulated and unheated, formed condensation on the ceiling due to snow on the roof. Even though the 'air' temp diff wasn't that far off, the snow on the roof kept the ceiling side of the metal panel at freezing and it sweat and dripped. Even if I insulate this spring will the insulation prevent sweating between the insulation and metal panels (walls or ceiling)?

[@justinfrench18]

In the process of deciding what type of garage to go with. Like what you have done here. What company did you order from and what are you going to finish over the insulation with? Looks really good!

[@YamRida468]

Justin French thanks! Carport central if you watch my other garage video I review it and you can see everything about it and make your decision. And I think drywall but there’s a chance I use plywood but I’m gonna post a video when I do it too

[@shawndoyle6460]

If going sheet rock maybe use the green stuff that's for damp areas... less likely to mold...

[@Stephanie.Michelle]

What kind of windows did you use? Just standard windows? Thanks!

[@Sparkynutz81]

Any details on the garage itself? I'm looking for a similar one for my tractor.

[@YamRida468]

Ryan Meyer yeah look at my other video which is a garage itself review

[@leudwigvonshwartsenhelm3624]

How does that insolation handle rain against the roof? Does it lower the sound?

[@YamRida468]

Leudwig vonshwartsenhelm yeah it did a good bit

[@dalenesty2019]

If you wanted more than R-13 what would you recommend . I am planning on making a living space out of one one of these buildings .

[@YamRida468]

Spray foam

[@billlamkin6066]

Looks good, did you do drywall yet, what do you plan to put on ceiling?

[@YamRida468]

No I didn’t, gonna spray foam I think

[@KingDrewPhilip]

So this works for steel storage sheds also I assume? It’s very similar.

[@teresagrigsby-rose8761]

No

[@billiefayehorne-hollingswo2134]

I dont know what you are using this building for but I am waiting on my building to be delivered and they highly recommended the double bubble... that metal condensates.. after double bubble, frame and then do the pink insulation

[@randomstuffwithjoe]

Any condensation issues? I'm looking into insulating my metal building but I was leaning toward closed cell spray foam which is more expensive.

[@JayZeee23]

I went closed spray foam and 99% of where I covered, has stopped condensation. Where I sprayed thin, it still condensates. Waiting til summer to RE-spray again. Also, I ran out after underestimating how much spray foam I would need so make sure you get more than you think you'll need.

[@garyhaber333]

You're planning on sheetrock, right? Always hated the look of paperback insulation,looks so much better when imperfections are hidden.

[@jrexcleaningsolutions153]

Looks good as hell

[@YamRida468]

Jem Reyes thanks! 🤙🏼

[@joshcosta423]

Consider using FRP panels like in public restrooms as the wall board? It's cheap, looks good and is water proof.

[@YamRida468]

Josh Costa solid idea! But there over double the price of drywall or plywood unfortunately

[@jonathandavis4431]

What kind of lights are you using and how many lumens per light fixture

[@YamRida468]

Jonathan Davis I believe 4000 and there off amazon

[@tomcook5813]

How did you seal the top of the walls where meet the ceiling?

[@YamRida468]

I didn’t, so it could vent and breathe

[@seungk8607]

What size is that shed? Thanks

[@KiwiSkipper]

any chance of seeing the finished shed walls

[@murf77donnelly33]

How do you like the door over a rool up door I'm doing a 16/8 door on mine I like your opener there...

[@YamRida468]

Love it!!

[@GallavantingBlasians]

Have you had any mold or moisture issues since installing the batting insulation?

[@YamRida468]

Nope!

[@tigerlilly6895]

So do you feel that it helps with the roof noise? I didn't hear you say...

[@YamRida468]

Tiger Lilly yeah a little bit when I get it boarded up I think it will a lot

[@dalew6292]

Is the power tailgate an oem item, or aftermarket?

[@YamRida468]

Dale W oem on the Laramie

[@MrjohnMccloud]

what about condensation? Has the insulation fallen down due to getting wet.

[@YamRida468]

No not getting wet but glue stated to fail in the heat

[@apriljoamy]

I need to do this exact same thing. Please make sure to post how you walled it up.

[@klrguy690]

What size garage did you go with? Great video - thanks for sharing!

[@robchopshopdually]

What will you be covering the insulation with?

[@YamRida468]

Robert Melendez vapor barrier and was gonna do drywall but now it’s looking like plywood

[@Mr00934]

what brand of insulation and where you bot it at....along with what kinda glue too

[@YamRida468]

Bruce Barrett knaufman I believe and got a hook up from a buddy. Glue is 3m super 77

[@varleyfitch6544]

What was the size of your building? Also why did you go with regular garage door instead of roll up? I’m looking to do a 40’x40’x14’. Trying to get all the info I can get.

[@sheldondaigh8123]

He probably wanted insulated doors, do they even make an insulated roll up?

[@mikehennington492]

CONDENSATION!!!!! Better rip down now and do right or you can tear rusted out garage later. Hopefully after you have recovered from the lung infection from the mold.

[@ModMINI]

Not to mention the electrical code violation (No sub panel)

[@TopNotchTile]

My 400sqft tree/playhouse even has a sub panel ..and I did a 1½ gap between my tin roof and the vapor barrier like a bubble wrap foil stuff .. then the r 19 .. live and learn

[@myfriendpete]

@@TopNotchTile Thats the RIGHT STUFF to use -- Bubble Wrap Foil Insulation..

[@Tonyusoptimus]

Planning on doing the same to my shed in florida, what kind of glue did you use

[@larryedge109]

What about condensation behind the insulation is there any

[@westernefficientenergy902]

What's the spacing on the studs? It seems 24" batt may have saved some time. Looks good though

[@YamRida468]

Western Efficient Energy thanks and there all different unfortunately anywhere from 2.5’ to 4’

[@udavidism]

He did use 24 inch batts, at 2:20 you can read the bag it came in.

[@fp8279]

What is used for a vapor barrier

[@tmontel2116]

Hey man have you had any issues with this? Looking at doing this in my garage too.

[@marciliosilva3343]

That is a great job.

[@YamRida468]

Thank you!

[@Robert-qd8rf]

I've been waiting to see this done. Comparing prices now for my new Garage.

[@YamRida468]

Robert Steele yeah I’m happy with it so far!

[@mccwho]

Good luck in the future with moisture between the metal and fiberglass. I hope you don't get the rust that I got from using fiberglass.

[@evanhammond7305]

Hi looks awsome I'm looking to purchase a similar garage. I live in west Central Alberta Canada. I do garage doors for work (16 years) I will be insulating and sheeting my garage with overhead door packaging panels completely free. Just a tip you should lower your lock on your door I know it says that in the instructions but it's almost pointless if you are able to lift it 3 inches they will be able to get in.

[@RaldasDetails]

How big is that building bro? Nice video 👍🏼

[@YamRida468]

Ralda’s Details 24x25 and thank you!

[@DM-eb2ye]

Yea, probably should have had a moisture barrier still.. before using the other insulation. Wonder how well this is holding up after 2 years

[@Gokywildcats11]

What kind of glue are you using

[@jamescook2044]

How long does it spray glue work

[@jeffconley819]

What size is that.

[@adrianwhite9899]

Did you do a video with the dry wall

[@YamRida468]

adrian white not yet! Stay tuned tho!

[@The570Experience]

Do you have a link to where you bought the garage?

[@YamRida468]

Carport central

[@the_realJP_]

No vapor barrier??

[@kelvinlyons3401]

Very nice I am going to try it

[@citizenoftheuniverso]

What heater do you have for your garage? Or are planning on installing?

[@YamRida468]

Citizen of the universe I just have a small 15,000 btu propane heater right now but going to put in a wall mounted natural gas heater soon!

[@davidconley3610]

Nice job 👍

[@quayzevely1527]

i used foam sheets glued to the metal then ran 1x4 boards for rails to add 1/2 inch fiber board as walls to mount french cleats to hang equipment on.

[@Stewbie63]

In it's entirety what was the cost?

[@DroidSaxYAcordeon]

Oh man! This is a terrible idea! Your insulation will get moldy real quick. The vapor barrier will just trap moisture in between the steel and insulation.

[@howiedoin582]

exactly what I was thinking

[@StrongLikeBullTV]

So what is the solution to insulating these metal buildings? I need to know.

[@ETPFilmMedia]

You have no idea what you are talking about. Let me guess, you would suggest a vapor barrier on the outside and inside, am I right? That would cause mold for sure since you would have double vapor barriers that would trap moisture in the middle.. This is the correct way to insulate a pole barn and they have been doing it this way forever.. Just need to make sure the heater is vented and have a dehumidifier or AC unit removing moisture. No different than a house except a house will have way more moisture inside than this garage will ever have.

[@mazenkano1811]

how much did it cost to put insulation?

[@YamRida468]

Mazen kano less than a thousand

[@troyeager8877]

I recommend not using a paper faced sheet rock. Eventually you will get some minor leaks if the siding is screwed on like my pole barn. Paper will attract mold.

[@YamRida468]

Troy eager I think I’m actually going to do plywood for that reason and if it shifts it won’t crack